devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Murali Karicheri <m-karicheri2@ti.com>
To: grant.likely@secretlab.ca, rob.herring@calxeda.com,
	rob@landley.net, dwmw2@infradead.org,
	artem.bityutskiy@linux.intel.com, hs@denx.de, nsekhar@ti.com,
	mikedunn@newsguy.com, devicetree-discuss@lists.ozlabs.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org,
	davinci-linux-open-source@linux.davincidsp.com
Cc: Murali Karicheri <m-karicheri2@ti.com>
Subject: [RESEND:PATCH] mtd: davinci-nand: add support for partition binding nodes
Date: Tue, 6 Nov 2012 16:18:41 -0500	[thread overview]
Message-ID: <1352236721-22913-1-git-send-email-m-karicheri2@ti.com> (raw)

Enhance the driver to support partition subnodes inside the nand
device bindings to describe partitions on the nand device.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
---
 .../devicetree/bindings/arm/davinci/nand.txt       |    8 ++++++++
 drivers/mtd/nand/davinci_nand.c                    |   13 ++++++++++---
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
index e37241f..4746452 100644
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
@@ -23,6 +23,9 @@ Recommended properties :
 - ti,davinci-nand-buswidth: buswidth 8 or 16
 - ti,davinci-nand-use-bbt: use flash based bad block table support.
 
+nand device bindings may contain additional sub-nodes describing
+partitions of the address space. See partition.txt for more detail.
+
 Example (enbw_cmc board):
 aemif@60000000 {
 	compatible = "ti,davinci-aemif";
@@ -47,5 +50,10 @@ aemif@60000000 {
 		ti,davinci-ecc-mode = "hw";
 		ti,davinci-ecc-bits = <4>;
 		ti,davinci-nand-use-bbt;
+
+		partition@180000 {
+			label = "ubifs";
+			reg = <0x180000 0x7e80000>;
+		};
 	};
 };
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index df1ab7d..321b053 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -821,9 +821,16 @@ syndrome_done:
 	if (ret < 0)
 		goto err_scan;
 
-	ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
-					pdata->nr_parts);
-
+	if (pdata->parts)
+		ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
+					pdata->parts, pdata->nr_parts);
+	else {
+		struct mtd_part_parser_data	ppdata;
+
+		ppdata.of_node = pdev->dev.of_node;
+		ret = mtd_device_parse_register(&info->mtd, NULL, &ppdata,
+						NULL, 0);
+	}
 	if (ret < 0)
 		goto err_scan;
 
-- 
1.7.9.5


                 reply	other threads:[~2012-11-06 21:18 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1352236721-22913-1-git-send-email-m-karicheri2@ti.com \
    --to=m-karicheri2@ti.com \
    --cc=artem.bityutskiy@linux.intel.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=dwmw2@infradead.org \
    --cc=grant.likely@secretlab.ca \
    --cc=hs@denx.de \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mikedunn@newsguy.com \
    --cc=nsekhar@ti.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).