From: "Patil, Rachna" <rachna@ti.com>
To: linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-iio@vger.kernel.org
Cc: Rob Landley <rob@landley.net>,
Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Samuel Ortiz <sameo@linux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Dmitry Torokhov <dtor@mail.ru>,
Jonathan Cameron <jic23@cam.ac.uk>,
"Patil, Rachna" <rachna@ti.com>
Subject: [PATCH RESEND 6/7] input: ti_am335x_tsc: Add DT support
Date: Wed, 7 Nov 2012 12:22:03 +0530 [thread overview]
Message-ID: <1352271124-5513-7-git-send-email-rachna@ti.com> (raw)
In-Reply-To: <1352271124-5513-1-git-send-email-rachna@ti.com>
Add DT support for client touchscreen driver
Signed-off-by: Patil, Rachna <rachna@ti.com>
---
drivers/input/touchscreen/ti_am335x_tsc.c | 60 ++++++++++++++++++++++++-----
1 files changed, 50 insertions(+), 10 deletions(-)
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 7a26810..c063cf6 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -26,6 +26,8 @@
#include <linux/io.h>
#include <linux/input/ti_am335x_tsc.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
@@ -398,12 +400,18 @@ static int __devinit titsc_probe(struct platform_device *pdev)
struct titsc *ts_dev;
struct input_dev *input_dev;
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
- int err;
-
- pdata = tscadc_dev->dev->platform_data;
-
- if (!pdata) {
+ int err, i;
+ struct mfd_tscadc_board *pdata = NULL;
+ struct device_node *node = NULL;
+ u32 val32, wires_conf[4];
+
+ if (tscadc_dev->dev->of_node) {
+ node = tscadc_dev->dev->of_node;
+ node = of_find_node_by_name(node, "tsc");
+ } else
+ pdata = tscadc_dev->dev->platform_data;
+
+ if (!pdata && !node) {
dev_err(&pdev->dev, "Could not find platform data\n");
return -EINVAL;
}
@@ -421,11 +429,43 @@ static int __devinit titsc_probe(struct platform_device *pdev)
ts_dev->mfd_tscadc = tscadc_dev;
ts_dev->input = input_dev;
ts_dev->irq = tscadc_dev->irq;
- ts_dev->wires = pdata->tsc_init->wires;
- ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
- ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
- memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config,
+
+ if (node) {
+ err = of_property_read_u32(node, "wires", &val32);
+ if (err < 0)
+ goto err_free_mem;
+ else
+ ts_dev->wires = val32;
+
+ err = of_property_read_u32(node, "x-plate-resistance", &val32);
+ if (err < 0)
+ goto err_free_mem;
+ else
+ ts_dev->x_plate_resistance = val32;
+
+ err = of_property_read_u32(node, "steps-to-configure", &val32);
+ if (err < 0)
+ goto err_free_mem;
+ else
+ ts_dev->steps_to_configure = val32;
+
+ err = of_property_read_u32_array(node, "wire-config",
+ wires_conf, ARRAY_SIZE(wires_conf));
+ if (err < 0)
+ goto err_free_mem;
+ else {
+ for (i = 0; i < ARRAY_SIZE(wires_conf); i++)
+ ts_dev->config_inp[i] = wires_conf[i];
+ }
+ } else {
+ ts_dev->wires = pdata->tsc_init->wires;
+ ts_dev->x_plate_resistance =
+ pdata->tsc_init->x_plate_resistance;
+ ts_dev->steps_to_configure =
+ pdata->tsc_init->steps_to_configure;
+ memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config,
sizeof(pdata->tsc_init->wire_config));
+ }
err = request_irq(ts_dev->irq, titsc_irq,
0, pdev->dev.driver->name, ts_dev);
--
1.7.0.4
next prev parent reply other threads:[~2012-11-07 6:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-07 6:51 [PATCH RESEND 0/7] MFD: ti_am335x_tscadc: DT support and TSC features addition Patil, Rachna
2012-11-07 6:51 ` [PATCH RESEND 1/7] input: ti_am335x_tsc: Step enable bits made configurable Patil, Rachna
2012-11-07 6:51 ` [PATCH RESEND 2/7] input: ti_am335x_tsc: Order of TSC wires, " Patil, Rachna
2012-11-07 6:52 ` [PATCH RESEND 3/7] input: ti_am335x_tsc: Add variance filter Patil, Rachna
2012-11-21 18:33 ` Dmitry Torokhov
[not found] ` <20121121183350.GB18950-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org>
2012-11-27 7:07 ` Patil, Rachna
2012-11-07 6:52 ` [PATCH RESEND 4/7] MFD: ti_am335x_tscadc: add device tree binding information Patil, Rachna
[not found] ` <1352271124-5513-1-git-send-email-rachna-l0cyMroinI0@public.gmane.org>
2012-11-07 6:52 ` [PATCH RESEND 5/7] MFD: ti_am335x_tscadc: Add DT support Patil, Rachna
2012-11-07 6:52 ` Patil, Rachna [this message]
[not found] ` <1352271124-5513-7-git-send-email-rachna-l0cyMroinI0@public.gmane.org>
2012-11-21 18:32 ` [PATCH RESEND 6/7] input: ti_am335x_tsc: " Dmitry Torokhov
2012-11-27 7:11 ` Patil, Rachna
2012-11-07 6:52 ` [PATCH RESEND 7/7] IIO: ti_am335x_adc: " Patil, Rachna
2012-11-16 10:33 ` [PATCH RESEND 0/7] MFD: ti_am335x_tscadc: DT support and TSC features addition Patil, Rachna
[not found] ` <4CE347531D4CA947960AF71FF095B9323E96C54A-Er742YJ7I/eIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2012-11-21 17:00 ` Samuel Ortiz
2012-11-27 7:14 ` Patil, Rachna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352271124-5513-7-git-send-email-rachna@ti.com \
--to=rachna@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dtor@mail.ru \
--cc=grant.likely@secretlab.ca \
--cc=jic23@cam.ac.uk \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).