From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
To: mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux ARM
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH 0/7] core, cpu and gated clocks for mvebu
Date: Thu, 15 Nov 2012 22:28:19 +0100 [thread overview]
Message-ID: <1353014906-31566-1-git-send-email-andrew@lunn.ch> (raw)
This patchset combines code from Gregory Clement, Sebastian
Hesselbarth and myself to implement core clks, cpu clock and gated
clocks on Marvel MVEBU SoCs.
The Armada 370/XP core clock code is a refactored version of the
already submitted and ACKed code from Gregory. It has been made to fit
inside a framework developed by Sebastian which can handle all MVEBU
SoCs. The Armarda 370/XP SoCs have more core clocks than the older SoCs, and
the framework needs to handle this. Rather than specify the clock
frequencies in DT, a Sample At Reset register is used, which describes
each core clock frequency.
Armarda XP is an SMP processor, with each CPU having its own
clock. Gregories code for this has been taken as is.
The Armarda 370/XP clock source has been converted to the common clock
framework.
Dove, Kirkword, and probably Armarda 370/XP have the ability to gate
clocks to various blocks. A clk-gate clock is created for each of the
gateable clocks on Dove and Kirkwood. Armarda 370/XP clock gates are
currently unimplemented. Dove and Kirkwood board-dt.c and DT
descriptions are then modified to make use of these clk gates.
This code has been tested on:
Kirkwood based QNAP TS219
Armarda 370 based mirabox
Armara XP based OpenBlocks
and by Sebastian on:
Dove based Cubox.
Andrew Lunn (1):
ARM: Kirkwood: switch to DT clock providers
Gregory CLEMENT (3):
clk: mvebu: add armada-370-xp CPU specific clocks
clk: armada-370-xp: add support for clock framework
clocksource: time-armada-370-xp converted to clk framework
Sebastian Hesselbarth (3):
clk: mvebu: add mvebu core clocks.
clk: mvebu: add clock gating control provider for DT
ARM: dove: switch to DT clock providers
.../devicetree/bindings/clock/mvebu-core-clock.txt | 47 ++
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 21 +
.../bindings/clock/mvebu-gated-clock.txt | 76 +++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/armada-370-db.dts | 4 -
arch/arm/boot/dts/armada-370-xp.dtsi | 1 +
arch/arm/boot/dts/armada-370.dtsi | 7 +
arch/arm/boot/dts/armada-xp.dtsi | 42 ++
arch/arm/boot/dts/dove.dtsi | 20 +
arch/arm/boot/dts/kirkwood.dtsi | 22 +
arch/arm/mach-dove/Kconfig | 2 +
arch/arm/mach-dove/common.c | 64 +-
arch/arm/mach-kirkwood/Kconfig | 2 +
arch/arm/mach-kirkwood/board-dt.c | 72 ++-
arch/arm/mach-mvebu/Kconfig | 6 +
arch/arm/mach-mvebu/armada-370-xp.c | 9 +-
arch/arm/plat-orion/include/plat/common.h | 1 +
drivers/clk/Kconfig | 2 +
drivers/clk/Makefile | 1 +
drivers/clk/mvebu/Kconfig | 8 +
drivers/clk/mvebu/Makefile | 3 +
drivers/clk/mvebu/clk-core.c | 675 ++++++++++++++++++++
drivers/clk/mvebu/clk-core.h | 18 +
drivers/clk/mvebu/clk-cpu.c | 155 +++++
drivers/clk/mvebu/clk-cpu.h | 18 +
drivers/clk/mvebu/clk-gating-ctrl.c | 177 +++++
drivers/clk/mvebu/clk.c | 37 ++
drivers/clocksource/time-armada-370-xp.c | 11 +-
include/linux/clk/mvebu.h | 23 +
29 files changed, 1487 insertions(+), 38 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
create mode 100644 drivers/clk/mvebu/Kconfig
create mode 100644 drivers/clk/mvebu/Makefile
create mode 100644 drivers/clk/mvebu/clk-core.c
create mode 100644 drivers/clk/mvebu/clk-core.h
create mode 100644 drivers/clk/mvebu/clk-cpu.c
create mode 100644 drivers/clk/mvebu/clk-cpu.h
create mode 100644 drivers/clk/mvebu/clk-gating-ctrl.c
create mode 100644 drivers/clk/mvebu/clk.c
create mode 100644 include/linux/clk/mvebu.h
--
1.7.10.4
next reply other threads:[~2012-11-15 21:28 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-15 21:28 Andrew Lunn [this message]
2012-11-15 21:28 ` [PATCH 1/7] clk: mvebu: add mvebu core clocks Andrew Lunn
[not found] ` <1353014906-31566-2-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-16 12:52 ` Gregory CLEMENT
2012-11-15 21:28 ` [PATCH 2/7] clk: mvebu: add armada-370-xp CPU specific clocks Andrew Lunn
[not found] ` <1353014906-31566-3-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-15 21:44 ` Thomas Petazzoni
2012-11-15 21:28 ` [PATCH 3/7] clk: armada-370-xp: add support for clock framework Andrew Lunn
[not found] ` <1353014906-31566-4-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-15 21:46 ` Thomas Petazzoni
[not found] ` <1353014906-31566-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-15 21:28 ` [PATCH 4/7] clocksource: time-armada-370-xp converted to clk framework Andrew Lunn
[not found] ` <1353014906-31566-5-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-15 21:49 ` Thomas Petazzoni
2012-11-15 21:28 ` [PATCH 5/7] clk: mvebu: add clock gating control provider for DT Andrew Lunn
2012-11-15 21:28 ` [PATCH 6/7] ARM: dove: switch to DT clock providers Andrew Lunn
[not found] ` <1353014906-31566-7-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-15 21:52 ` Thomas Petazzoni
2012-11-15 21:28 ` [PATCH 7/7] ARM: Kirkwood: " Andrew Lunn
[not found] ` <1353014906-31566-8-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-16 17:33 ` Gregory CLEMENT
2012-11-15 21:54 ` [PATCH 0/7] core, cpu and gated clocks for mvebu Thomas Petazzoni
2012-11-16 7:32 ` Andrew Lunn
2012-11-16 12:51 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353014906-31566-1-git-send-email-andrew@lunn.ch \
--to=andrew-g2dyl2zd6by@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).