* [PATCH v2 0/9] core, cpu and gated clocks for mvebu
@ 2012-11-17 14:22 Andrew Lunn
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Andrew Lunn, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
This patchset combines code from Gregory Clement, Sebastian
Hesselbarth and myself to implement core clks, cpu clock and gated
clocks on Marvel MVEBU SoCs.
The Armada 370/XP core clock code is a refactored version of the
already submitted and ACKed code from Gregory. It has been made to fit
inside a framework developed by Sebastian which can handle all MVEBU
SoCs. The Armada 370/XP SoCs have more core clocks than the older SoCs, and
the framework needs to handle this. Rather than specify the clock
frequencies in DT, a Sample At Reset register is used, which describes
each core clock frequency.
Armada XP is an SMP processor, with each CPU having its own
clock. Gregories code for this has been taken as is.
The Armada 370/XP clock source has been converted to the common clock
framework.
Dove, Kirkword, and Armada 370/XP have the ability to gate
clocks to various blocks. A clk-gate clock is created for each of the
gateable clocks on Dove and Kirkwood and Armada 370/XP.
This code has been tested on:
Kirkwood based QNAP TS219
Armada 370 based mirabox
Armada XP based OpenBlocks
Dove based Cubox.
v1 -> v2
Moved some patch hunks into the correct patch
Added armada_ prefix to a number of symbols
renamed clk_gate to gate_clk
renamed *-clock-gating to *-gating-clock
Add gating-clock implementation for Armada 370/XP
Add Tested-by from Gregory
Documented required clock property in armada-370-xp-timer.txt
Andrew Lunn (1):
ARM: Kirkwood: switch to DT clock providers
Gregory CLEMENT (5):
clk: mvebu: add armada-370-xp CPU specific clocks
clk: armada-370-xp: add support for clock framework
clocksource: convert time-armada-370-xp to clk framework
clk: mvebu: armada 370/XP add clock gating control provider for DT
arm: mvebu: armada 370/XP adding clock gating support: dt binding
Sebastian Hesselbarth (3):
clk: mvebu: add mvebu core clocks.
clk: mvebu: add clock gating control provider for DT
ARM: dove: switch to DT clock providers
.../bindings/arm/armada-370-xp-timer.txt | 1 +
.../devicetree/bindings/clock/mvebu-core-clock.txt | 47 ++
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 21 +
.../bindings/clock/mvebu-gated-clock.txt | 119 ++++
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/armada-370-db.dts | 4 -
arch/arm/boot/dts/armada-370-xp.dtsi | 1 +
arch/arm/boot/dts/armada-370.dtsi | 15 +
arch/arm/boot/dts/armada-xp.dtsi | 49 ++
arch/arm/boot/dts/dove.dtsi | 20 +
arch/arm/boot/dts/kirkwood.dtsi | 22 +
arch/arm/mach-dove/Kconfig | 2 +
arch/arm/mach-dove/common.c | 64 +-
arch/arm/mach-kirkwood/Kconfig | 2 +
arch/arm/mach-kirkwood/board-dt.c | 72 ++-
arch/arm/mach-mvebu/Kconfig | 4 +
arch/arm/mach-mvebu/armada-370-xp.c | 9 +-
arch/arm/plat-orion/include/plat/common.h | 1 +
drivers/clk/Kconfig | 2 +
drivers/clk/Makefile | 1 +
drivers/clk/mvebu/Kconfig | 8 +
drivers/clk/mvebu/Makefile | 3 +
drivers/clk/mvebu/clk-core.c | 675 ++++++++++++++++++++
drivers/clk/mvebu/clk-core.h | 18 +
drivers/clk/mvebu/clk-cpu.c | 155 +++++
drivers/clk/mvebu/clk-cpu.h | 18 +
drivers/clk/mvebu/clk-gating-ctrl.c | 238 +++++++
drivers/clk/mvebu/clk.c | 37 ++
drivers/clocksource/time-armada-370-xp.c | 11 +-
include/linux/clk/mvebu.h | 23 +
30 files changed, 1605 insertions(+), 38 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
create mode 100644 drivers/clk/mvebu/Kconfig
create mode 100644 drivers/clk/mvebu/Makefile
create mode 100644 drivers/clk/mvebu/clk-core.c
create mode 100644 drivers/clk/mvebu/clk-core.h
create mode 100644 drivers/clk/mvebu/clk-cpu.c
create mode 100644 drivers/clk/mvebu/clk-cpu.h
create mode 100644 drivers/clk/mvebu/clk-gating-ctrl.c
create mode 100644 drivers/clk/mvebu/clk.c
create mode 100644 include/linux/clk/mvebu.h
--
1.7.10.4
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/9] clk: mvebu: add mvebu core clocks.
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 2/9] clk: mvebu: add armada-370-xp CPU specific clocks Andrew Lunn
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Andrew Lunn, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM,
Sebastian Hesselbarth
From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This driver allows to provide DT clocks for core clocks found on
Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and
ratios are determined by decoding the Sample-At-Reset registers.
Although technically correct, using a divider of 0 will lead to
div_by_zero panic. Let's use a ratio of 0/1 instead to fail later
with a zero clock.
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Tested-by Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
.../devicetree/bindings/clock/mvebu-core-clock.txt | 47 ++
drivers/clk/Kconfig | 2 +
drivers/clk/Makefile | 1 +
drivers/clk/mvebu/Kconfig | 3 +
drivers/clk/mvebu/Makefile | 1 +
drivers/clk/mvebu/clk-core.c | 675 ++++++++++++++++++++
drivers/clk/mvebu/clk-core.h | 18 +
drivers/clk/mvebu/clk.c | 23 +
include/linux/clk/mvebu.h | 22 +
9 files changed, 792 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
create mode 100644 drivers/clk/mvebu/Kconfig
create mode 100644 drivers/clk/mvebu/Makefile
create mode 100644 drivers/clk/mvebu/clk-core.c
create mode 100644 drivers/clk/mvebu/clk-core.h
create mode 100644 drivers/clk/mvebu/clk.c
create mode 100644 include/linux/clk/mvebu.h
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
new file mode 100644
index 0000000..ffb3d69
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -0,0 +1,47 @@
+* Core Clock bindings for Marvell MVEBU SoCs
+
+Marvell MVEBU SoCs usually allow to determine core clock frequencies by
+reading the Sample-At-Reset (SAR) register. The core clock consumer should
+specify the desired clock by having the clock ID in its "clocks" phandle cell.
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU clock)
+ 2 = nbclk (L2 Cache clock)
+ 3 = hclk (DRAM control clock)
+ 4 = dramclk (DDR clock)
+
+The following is a list of provided IDs and clock names on Kirkwood and Dove:
+ 0 = tclk (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = l2clk (L2 Cache clock derived from CPU0 clock)
+ 3 = ddrclk (DDR controller clock derived from CPU0 clock)
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-370-core-clocks" - For Armada 370 SoC core clocks
+ "marvell,armada-xp-core-clocks" - For Armada XP SoC core clocks
+ "marvell,dove-core-clocks" - for Dove SoC core clocks
+ "marvell,kirkwood-core-clocks" - for Kirkwood SoC (except mv88f6180)
+ "marvell,mv88f6180-core-clocks" - for Kirkwood MV88f6180 SoC
+- reg : shall be the register address of the Sample-At-Reset (SAR) register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clock-output-names : from common clock binding; allows overwrite default clock
+ output names ("tclk", "cpuclk", "l2clk", "ddrclk")
+
+Example:
+
+core_clk: core-clocks@d0214 {
+ compatible = "marvell,dove-core-clocks";
+ reg = <0xd0214 0x4>;
+ #clock-cells = <1>;
+};
+
+spi0: spi@10600 {
+ compatible = "marvell,orion-spi";
+ /* ... */
+ /* get tclk from core clock provider */
+ clocks = <&core_clk 0>;
+};
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index bace9e9..60427c0 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -54,3 +54,5 @@ config COMMON_CLK_MAX77686
This driver supports Maxim 77686 crystal oscillator clock.
endmenu
+
+source "drivers/clk/mvebu/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 71a25b9..d0a14ae 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o
+obj-$(CONFIG_PLAT_ORION) += mvebu/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
new file mode 100644
index 0000000..fd7bf97
--- /dev/null
+++ b/drivers/clk/mvebu/Kconfig
@@ -0,0 +1,3 @@
+config MVEBU_CLK_CORE
+ bool
+
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
new file mode 100644
index 0000000..de1d961
--- /dev/null
+++ b/drivers/clk/mvebu/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o
diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c
new file mode 100644
index 0000000..7e715ae
--- /dev/null
+++ b/drivers/clk/mvebu/clk-core.c
@@ -0,0 +1,675 @@
+/*
+ * Marvell EBU clock core handling defined at reset
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ * Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "clk-core.h"
+
+struct core_ratio {
+ int id;
+ const char *name;
+};
+
+struct core_clocks {
+ u32 (*get_tclk_freq)(void __iomem *sar);
+ u32 (*get_cpu_freq)(void __iomem *sar);
+ void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div);
+ const struct core_ratio *ratios;
+ int num_ratios;
+};
+
+static struct clk_onecell_data clk_data;
+
+static void __init mvebu_clk_core_setup(struct device_node *np,
+ struct core_clocks *coreclk)
+{
+ const char *tclk_name = "tclk";
+ const char *cpuclk_name = "cpuclk";
+ void __iomem *base;
+ unsigned long rate;
+ int n;
+
+ base = of_iomap(np, 0);
+ if (WARN_ON(!base))
+ return;
+
+ /*
+ * Allocate struct for TCLK, cpu clk, and core ratio clocks
+ */
+ clk_data.clk_num = 2 + coreclk->num_ratios;
+ clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *),
+ GFP_KERNEL);
+ if (WARN_ON(!clk_data.clks))
+ return;
+
+ /*
+ * Register TCLK
+ */
+ of_property_read_string_index(np, "clock-output-names", 0,
+ &tclk_name);
+ rate = coreclk->get_tclk_freq(base);
+ clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL,
+ CLK_IS_ROOT, rate);
+ WARN_ON(IS_ERR(clk_data.clks[0]));
+
+ /*
+ * Register CPU clock
+ */
+ of_property_read_string_index(np, "clock-output-names", 1,
+ &cpuclk_name);
+ rate = coreclk->get_cpu_freq(base);
+ clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL,
+ CLK_IS_ROOT, rate);
+ WARN_ON(IS_ERR(clk_data.clks[1]));
+
+ /*
+ * Register fixed-factor clocks derived from CPU clock
+ */
+ for (n = 0; n < coreclk->num_ratios; n++) {
+ const char *rclk_name = coreclk->ratios[n].name;
+ int mult, div;
+
+ of_property_read_string_index(np, "clock-output-names",
+ 2+n, &rclk_name);
+ coreclk->get_clk_ratio(base, coreclk->ratios[n].id,
+ &mult, &div);
+ clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name,
+ cpuclk_name, 0, mult, div);
+ WARN_ON(IS_ERR(clk_data.clks[2+n]));
+ };
+
+ /*
+ * SAR register isn't needed anymore
+ */
+ iounmap(base);
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+#ifdef CONFIG_MACH_ARMADA_370_XP
+/*
+ * Armada 370/XP Sample At Reset is a 64 bit bitfiled split in two
+ * register of 32 bits
+ */
+
+#define SARL 0 /* Low part [0:31] */
+#define SARL_AXP_PCLK_FREQ_OPT 21
+#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7
+#define SARL_A370_PCLK_FREQ_OPT 11
+#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF
+#define SARL_AXP_FAB_FREQ_OPT 24
+#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF
+#define SARL_A370_FAB_FREQ_OPT 15
+#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F
+#define SARL_A370_TCLK_FREQ_OPT 20
+#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1
+#define SARH 4 /* High part [32:63] */
+#define SARH_AXP_PCLK_FREQ_OPT (52-32)
+#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1
+#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3
+#define SARH_AXP_FAB_FREQ_OPT (51-32)
+#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1
+#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4
+
+static const u32 __initconst armada_370_tclk_frequencies[] = {
+ 16600000,
+ 20000000,
+};
+
+static u32 __init armada_370_get_tclk_freq(void __iomem *sar)
+{
+ u8 tclk_freq_select = 0;
+
+ tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) &
+ SARL_A370_TCLK_FREQ_OPT_MASK);
+ return armada_370_tclk_frequencies[tclk_freq_select];
+}
+
+static const u32 __initconst armada_370_cpu_frequencies[] = {
+ 400000000,
+ 533000000,
+ 667000000,
+ 800000000,
+ 1000000000,
+ 1067000000,
+ 1200000000,
+};
+
+static u32 __init armada_370_get_cpu_freq(void __iomem *sar)
+{
+ u32 cpu_freq;
+ u8 cpu_freq_select = 0;
+
+ cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) &
+ SARL_A370_PCLK_FREQ_OPT_MASK);
+ if (cpu_freq_select > ARRAY_SIZE(armada_370_cpu_frequencies)) {
+ pr_err("CPU freq select unsuported %d\n", cpu_freq_select);
+ cpu_freq = 0;
+ } else
+ cpu_freq = armada_370_cpu_frequencies[cpu_freq_select];
+
+ return cpu_freq;
+}
+
+enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK };
+
+static const struct core_ratio __initconst armada_370_xp_core_ratios[] = {
+ { .id = A370_XP_NBCLK, .name = "nbclk" },
+ { .id = A370_XP_HCLK, .name = "hclk" },
+ { .id = A370_XP_DRAMCLK, .name = "dramclk" },
+};
+
+static const int __initconst armada_370_xp_nbclk_ratios[32][2] = {
+ {0, 1}, {1, 2}, {2, 2}, {2, 2},
+ {1, 2}, {1, 2}, {1, 1}, {2, 3},
+ {0, 1}, {1, 2}, {2, 4}, {0, 1},
+ {1, 2}, {0, 1}, {0, 1}, {2, 2},
+ {0, 1}, {0, 1}, {0, 1}, {1, 1},
+ {2, 3}, {0, 1}, {0, 1}, {0, 1},
+ {0, 1}, {0, 1}, {0, 1}, {1, 1},
+ {0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int __initconst armada_370_xp_hclk_ratios[32][2] = {
+ {0, 1}, {1, 2}, {2, 6}, {2, 3},
+ {1, 3}, {1, 4}, {1, 2}, {2, 6},
+ {0, 1}, {1, 6}, {2, 10}, {0, 1},
+ {1, 4}, {0, 1}, {0, 1}, {2, 5},
+ {0, 1}, {0, 1}, {0, 1}, {1, 2},
+ {2, 6}, {0, 1}, {0, 1}, {0, 1},
+ {0, 1}, {0, 1}, {0, 1}, {1, 1},
+ {0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int __initconst armada_370_xp_dramclk_ratios[32][2] = {
+ {0, 1}, {1, 2}, {2, 3}, {2, 3},
+ {1, 3}, {1, 2}, {1, 2}, {2, 6},
+ {0, 1}, {1, 3}, {2, 5}, {0, 1},
+ {1, 4}, {0, 1}, {0, 1}, {2, 5},
+ {0, 1}, {0, 1}, {0, 1}, {1, 1},
+ {2, 3}, {0, 1}, {0, 1}, {0, 1},
+ {0, 1}, {0, 1}, {0, 1}, {1, 1},
+ {0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static void __init armada_370_xp_get_clk_ratio(u32 opt,
+ void __iomem *sar, int id, int *mult, int *div)
+{
+ switch (id) {
+ case A370_XP_NBCLK:
+ *mult = armada_370_xp_nbclk_ratios[opt][0];
+ *div = armada_370_xp_nbclk_ratios[opt][1];
+ break;
+ case A370_XP_HCLK:
+ *mult = armada_370_xp_hclk_ratios[opt][0];
+ *div = armada_370_xp_hclk_ratios[opt][1];
+ break;
+ case A370_XP_DRAMCLK:
+ *mult = armada_370_xp_dramclk_ratios[opt][0];
+ *div = armada_370_xp_dramclk_ratios[opt][1];
+ break;
+ }
+}
+
+static void __init armada_370_get_clk_ratio(
+ void __iomem *sar, int id, int *mult, int *div)
+{
+ u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) &
+ SARL_A370_FAB_FREQ_OPT_MASK);
+
+ armada_370_xp_get_clk_ratio(opt, sar, id, mult, div);
+}
+
+
+static const struct core_clocks armada_370_core_clocks = {
+ .get_tclk_freq = armada_370_get_tclk_freq,
+ .get_cpu_freq = armada_370_get_cpu_freq,
+ .get_clk_ratio = armada_370_get_clk_ratio,
+ .ratios = armada_370_xp_core_ratios,
+ .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios),
+};
+
+static const u32 __initconst armada_xp_cpu_frequencies[] = {
+ 1000000000,
+ 1066000000,
+ 1200000000,
+ 1333000000,
+ 1500000000,
+ 1666000000,
+ 1800000000,
+ 2000000000,
+ 667000000,
+ 0,
+ 800000000,
+ 1600000000,
+};
+
+/* For Armada XP TCLK frequency is fix: 250MHz */
+static u32 __init armada_xp_get_tclk_freq(void __iomem *sar)
+{
+ return 250 * 1000 * 1000;
+}
+
+static u32 __init armada_xp_get_cpu_freq(void __iomem *sar)
+{
+ u32 cpu_freq;
+ u8 cpu_freq_select = 0;
+
+ cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) &
+ SARL_AXP_PCLK_FREQ_OPT_MASK);
+ /*
+ * The upper bit is not contiguous to the other ones and
+ * located in the high part of the SAR registers
+ */
+ cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) &
+ SARH_AXP_PCLK_FREQ_OPT_MASK)
+ << SARH_AXP_PCLK_FREQ_OPT_SHIFT);
+ if (cpu_freq_select > ARRAY_SIZE(armada_xp_cpu_frequencies)) {
+ pr_err("CPU freq select unsuported: %d\n", cpu_freq_select);
+ cpu_freq = 0;
+ } else
+ cpu_freq = armada_xp_cpu_frequencies[cpu_freq_select];
+
+ return cpu_freq;
+}
+
+static void __init armada_xp_get_clk_ratio(
+ void __iomem *sar, int id, int *mult, int *div)
+{
+
+ u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) &
+ SARL_AXP_FAB_FREQ_OPT_MASK);
+ /*
+ * The upper bit is not contiguous to the other ones and
+ * located in the high part of the SAR registers
+ */
+ opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) &
+ SARH_AXP_FAB_FREQ_OPT_MASK)
+ << SARH_AXP_FAB_FREQ_OPT_SHIFT);
+
+ armada_370_xp_get_clk_ratio(opt, sar, id, mult, div);
+}
+
+static const struct core_clocks armada_xp_core_clocks = {
+ .get_tclk_freq = armada_xp_get_tclk_freq,
+ .get_cpu_freq = armada_xp_get_cpu_freq,
+ .get_clk_ratio = armada_xp_get_clk_ratio,
+ .ratios = armada_370_xp_core_ratios,
+ .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios),
+};
+
+#endif /* CONFIG_MACH_ARMADA_370_XP */
+
+/*
+ * Dove PLL sample-at-reset configuration
+ *
+ * SAR0[8:5] : CPU frequency
+ * 5 = 1000 MHz
+ * 6 = 933 MHz
+ * 7 = 933 MHz
+ * 8 = 800 MHz
+ * 9 = 800 MHz
+ * 10 = 800 MHz
+ * 11 = 1067 MHz
+ * 12 = 667 MHz
+ * 13 = 533 MHz
+ * 14 = 400 MHz
+ * 15 = 333 MHz
+ * others reserved.
+ *
+ * SAR0[11:9] : CPU to L2 Clock divider ratio
+ * 0 = (1/1) * CPU
+ * 2 = (1/2) * CPU
+ * 4 = (1/3) * CPU
+ * 6 = (1/4) * CPU
+ * others reserved.
+ *
+ * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio
+ * 0 = (1/1) * CPU
+ * 2 = (1/2) * CPU
+ * 3 = (2/5) * CPU
+ * 4 = (1/3) * CPU
+ * 6 = (1/4) * CPU
+ * 8 = (1/5) * CPU
+ * 10 = (1/6) * CPU
+ * 12 = (1/7) * CPU
+ * 14 = (1/8) * CPU
+ * 15 = (1/10) * CPU
+ * others reserved.
+ *
+ * SAR0[24:23] : TCLK frequency
+ * 0 = 166 MHz
+ * 1 = 125 MHz
+ * others reserved.
+ */
+#ifdef CONFIG_ARCH_DOVE
+#define SAR_DOVE_CPU_FREQ 5
+#define SAR_DOVE_CPU_FREQ_MASK 0xf
+#define SAR_DOVE_L2_RATIO 9
+#define SAR_DOVE_L2_RATIO_MASK 0x7
+#define SAR_DOVE_DDR_RATIO 12
+#define SAR_DOVE_DDR_RATIO_MASK 0xf
+#define SAR_DOVE_TCLK_FREQ 23
+#define SAR_DOVE_TCLK_FREQ_MASK 0x3
+
+static const u32 __initconst dove_tclk_frequencies[] = {
+ 166666667,
+ 125000000,
+ 0, 0
+};
+
+static u32 __init dove_get_tclk_freq(void __iomem *sar)
+{
+ u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) &
+ SAR_DOVE_TCLK_FREQ_MASK;
+ return dove_tclk_frequencies[opt];
+}
+
+static const u32 __initconst dove_cpu_frequencies[] = {
+ 0, 0, 0, 0, 0,
+ 1000000000,
+ 933333333, 933333333,
+ 800000000, 800000000, 800000000,
+ 1066666667,
+ 666666667,
+ 533333333,
+ 400000000,
+ 333333333
+};
+
+static u32 __init dove_get_cpu_freq(void __iomem *sar)
+{
+ u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) &
+ SAR_DOVE_CPU_FREQ_MASK;
+ return dove_cpu_frequencies[opt];
+}
+
+enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR };
+
+static const struct core_ratio __initconst dove_core_ratios[] = {
+ { .id = DOVE_CPU_TO_L2, .name = "l2clk", },
+ { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", }
+};
+
+static const int __initconst dove_cpu_l2_ratios[8][2] = {
+ { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 },
+ { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }
+};
+
+static const int __initconst dove_cpu_ddr_ratios[16][2] = {
+ { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 },
+ { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 },
+ { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 },
+ { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 }
+};
+
+static void __init dove_get_clk_ratio(
+ void __iomem *sar, int id, int *mult, int *div)
+{
+ switch (id) {
+ case DOVE_CPU_TO_L2:
+ {
+ u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) &
+ SAR_DOVE_L2_RATIO_MASK;
+ *mult = dove_cpu_l2_ratios[opt][0];
+ *div = dove_cpu_l2_ratios[opt][1];
+ break;
+ }
+ case DOVE_CPU_TO_DDR:
+ {
+ u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) &
+ SAR_DOVE_DDR_RATIO_MASK;
+ *mult = dove_cpu_ddr_ratios[opt][0];
+ *div = dove_cpu_ddr_ratios[opt][1];
+ break;
+ }
+ }
+}
+
+static const struct core_clocks dove_core_clocks = {
+ .get_tclk_freq = dove_get_tclk_freq,
+ .get_cpu_freq = dove_get_cpu_freq,
+ .get_clk_ratio = dove_get_clk_ratio,
+ .ratios = dove_core_ratios,
+ .num_ratios = ARRAY_SIZE(dove_core_ratios),
+};
+#endif /* CONFIG_ARCH_DOVE */
+
+/*
+ * Kirkwood PLL sample-at-reset configuration
+ * (6180 has different SAR layout than other Kirkwood SoCs)
+ *
+ * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282)
+ * 4 = 600 MHz
+ * 6 = 800 MHz
+ * 7 = 1000 MHz
+ * 9 = 1200 MHz
+ * 12 = 1500 MHz
+ * 13 = 1600 MHz
+ * 14 = 1800 MHz
+ * 15 = 2000 MHz
+ * others reserved.
+ *
+ * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282)
+ * 1 = (1/2) * CPU
+ * 3 = (1/3) * CPU
+ * 5 = (1/4) * CPU
+ * others reserved.
+ *
+ * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282)
+ * 2 = (1/2) * CPU
+ * 4 = (1/3) * CPU
+ * 6 = (1/4) * CPU
+ * 7 = (2/9) * CPU
+ * 8 = (1/5) * CPU
+ * 9 = (1/6) * CPU
+ * others reserved.
+ *
+ * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only)
+ * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU]
+ * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU]
+ * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU]
+ * others reserved.
+ *
+ * SAR0[21] : TCLK frequency
+ * 0 = 200 MHz
+ * 1 = 166 MHz
+ * others reserved.
+ */
+#ifdef CONFIG_ARCH_KIRKWOOD
+#define SAR_KIRKWOOD_CPU_FREQ(x) \
+ (((x & (1 << 1)) >> 1) | \
+ ((x & (1 << 22)) >> 21) | \
+ ((x & (3 << 3)) >> 1))
+#define SAR_KIRKWOOD_L2_RATIO(x) \
+ (((x & (3 << 9)) >> 9) | \
+ (((x & (1 << 19)) >> 17)))
+#define SAR_KIRKWOOD_DDR_RATIO 5
+#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf
+#define SAR_MV88F6180_CLK 2
+#define SAR_MV88F6180_CLK_MASK 0x7
+#define SAR_KIRKWOOD_TCLK_FREQ 21
+#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1
+
+enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR };
+
+static const struct core_ratio __initconst kirkwood_core_ratios[] = {
+ { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", },
+ { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", }
+};
+
+static u32 __init kirkwood_get_tclk_freq(void __iomem *sar)
+{
+ u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) &
+ SAR_KIRKWOOD_TCLK_FREQ_MASK;
+ return (opt) ? 166666667 : 200000000;
+}
+
+static const u32 __initconst kirkwood_cpu_frequencies[] = {
+ 0, 0, 0, 0,
+ 600000000,
+ 0,
+ 800000000,
+ 1000000000,
+ 0,
+ 1200000000,
+ 0, 0,
+ 1500000000,
+ 1600000000,
+ 1800000000,
+ 2000000000
+};
+
+static u32 __init kirkwood_get_cpu_freq(void __iomem *sar)
+{
+ u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar));
+ return kirkwood_cpu_frequencies[opt];
+}
+
+static const int __initconst kirkwood_cpu_l2_ratios[8][2] = {
+ { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 },
+ { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 }
+};
+
+static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = {
+ { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 },
+ { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 },
+ { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 },
+ { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }
+};
+
+static void __init kirkwood_get_clk_ratio(
+ void __iomem *sar, int id, int *mult, int *div)
+{
+ switch (id) {
+ case KIRKWOOD_CPU_TO_L2:
+ {
+ u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar));
+ *mult = kirkwood_cpu_l2_ratios[opt][0];
+ *div = kirkwood_cpu_l2_ratios[opt][1];
+ break;
+ }
+ case KIRKWOOD_CPU_TO_DDR:
+ {
+ u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) &
+ SAR_KIRKWOOD_DDR_RATIO_MASK;
+ *mult = kirkwood_cpu_ddr_ratios[opt][0];
+ *div = kirkwood_cpu_ddr_ratios[opt][1];
+ break;
+ }
+ }
+}
+
+static const struct core_clocks kirkwood_core_clocks = {
+ .get_tclk_freq = kirkwood_get_tclk_freq,
+ .get_cpu_freq = kirkwood_get_cpu_freq,
+ .get_clk_ratio = kirkwood_get_clk_ratio,
+ .ratios = kirkwood_core_ratios,
+ .num_ratios = ARRAY_SIZE(kirkwood_core_ratios),
+};
+
+static const u32 __initconst mv88f6180_cpu_frequencies[] = {
+ 0, 0, 0, 0, 0,
+ 600000000,
+ 800000000,
+ 1000000000
+};
+
+static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar)
+{
+ u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK;
+ return mv88f6180_cpu_frequencies[opt];
+}
+
+static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = {
+ { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 },
+ { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 }
+};
+
+static void __init mv88f6180_get_clk_ratio(
+ void __iomem *sar, int id, int *mult, int *div)
+{
+ switch (id) {
+ case KIRKWOOD_CPU_TO_L2:
+ {
+ /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */
+ *mult = 1;
+ *div = 2;
+ break;
+ }
+ case KIRKWOOD_CPU_TO_DDR:
+ {
+ u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) &
+ SAR_MV88F6180_CLK_MASK;
+ *mult = mv88f6180_cpu_ddr_ratios[opt][0];
+ *div = mv88f6180_cpu_ddr_ratios[opt][1];
+ break;
+ }
+ }
+}
+
+static const struct core_clocks mv88f6180_core_clocks = {
+ .get_tclk_freq = kirkwood_get_tclk_freq,
+ .get_cpu_freq = mv88f6180_get_cpu_freq,
+ .get_clk_ratio = mv88f6180_get_clk_ratio,
+ .ratios = kirkwood_core_ratios,
+ .num_ratios = ARRAY_SIZE(kirkwood_core_ratios),
+};
+#endif /* CONFIG_ARCH_KIRKWOOD */
+
+static const __initdata struct of_device_id clk_core_match[] = {
+#ifdef CONFIG_MACH_ARMADA_370_XP
+ {
+ .compatible = "marvell,armada-370-core-clocks",
+ .data = &armada_370_core_clocks,
+ },
+ {
+ .compatible = "marvell,armada-xp-core-clocks",
+ .data = &armada_xp_core_clocks,
+ },
+#endif
+#ifdef CONFIG_ARCH_DOVE
+ {
+ .compatible = "marvell,dove-core-clocks",
+ .data = &dove_core_clocks,
+ },
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+ {
+ .compatible = "marvell,kirkwood-core-clocks",
+ .data = &kirkwood_core_clocks,
+ },
+ {
+ .compatible = "marvell,mv88f6180-core-clocks",
+ .data = &mv88f6180_core_clocks,
+ },
+#endif
+
+ { }
+};
+
+void __init mvebu_core_clk_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, clk_core_match) {
+ const struct of_device_id *match =
+ of_match_node(clk_core_match, np);
+ mvebu_clk_core_setup(np, (struct core_clocks *)match->data);
+ }
+}
diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h
new file mode 100644
index 0000000..28b5e02
--- /dev/null
+++ b/drivers/clk/mvebu/clk-core.h
@@ -0,0 +1,18 @@
+/*
+ * * Marvell EBU clock core handling defined at reset
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_CORE_H
+#define __MVEBU_CLK_CORE_H
+
+void __init mvebu_core_clk_init(void);
+
+#endif
diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c
new file mode 100644
index 0000000..e6742ac
--- /dev/null
+++ b/drivers/clk/mvebu/clk.c
@@ -0,0 +1,23 @@
+/*
+ * Marvell EBU SoC clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include "clk-core.h"
+
+void __init mvebu_clocks_init(void)
+{
+ mvebu_core_clk_init();
+}
diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h
new file mode 100644
index 0000000..8c4ae71
--- /dev/null
+++ b/include/linux/clk/mvebu.h
@@ -0,0 +1,22 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CLK_MVEBU_H_
+#define __CLK_MVEBU_H_
+
+void __init mvebu_clocks_init(void);
+
+#endif
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/9] clk: mvebu: add armada-370-xp CPU specific clocks
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-17 14:22 ` [PATCH v2 1/9] clk: mvebu: add mvebu core clocks Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 3/9] clk: armada-370-xp: add support for clock framework Andrew Lunn
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Add Armada 370/XP specific CPU clocks
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Tested-by Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 21 +++
drivers/clk/mvebu/Kconfig | 3 +
drivers/clk/mvebu/Makefile | 1 +
drivers/clk/mvebu/clk-cpu.c | 155 ++++++++++++++++++++
drivers/clk/mvebu/clk-cpu.h | 18 +++
drivers/clk/mvebu/clk.c | 14 ++
6 files changed, 212 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
create mode 100644 drivers/clk/mvebu/clk-cpu.c
create mode 100644 drivers/clk/mvebu/clk-cpu.h
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
new file mode 100644
index 0000000..1fb5a64
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
@@ -0,0 +1,21 @@
+Device Tree Clock bindings for cpu clock of Marvell EBU platforms
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,armada-xp-cpu-clockctrl" - cpu clocks for Armada XP
+- reg : Address and length of the clock complex register set
+- #clock-cells : should be set to 1.
+- clocks : shall be the input parent clock phandle for the clock.
+
+cpuclk: clock-complex@d0018700 {
+ #clock-cells = <1>;
+ compatible = "marvell,armada-xp-cpu-clockctrl";
+ reg = <0xd0018700 0xA0>;
+ clocks = <&coreclk 1>;
+}
+
+cpu@0 {
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+};
diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index fd7bf97..1dd93ad 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -1,3 +1,6 @@
config MVEBU_CLK_CORE
bool
+config MVEBU_CLK_CPU
+ bool
+
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index de1d961..93da083 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o
+obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o
diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
new file mode 100644
index 0000000..1df027a
--- /dev/null
+++ b/drivers/clk/mvebu/clk-cpu.c
@@ -0,0 +1,155 @@
+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include "clk-cpu.h"
+
+#define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET 0x0
+#define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET 0xC
+#define SYS_CTRL_CLK_DIVIDER_MASK 0x3F
+
+#define MAX_CPU 4
+struct cpu_clk {
+ struct clk_hw hw;
+ int cpu;
+ const char *clk_name;
+ const char *parent_name;
+ void __iomem *reg_base;
+};
+
+static struct clk **clks;
+
+static struct clk_onecell_data clk_data;
+
+#define to_cpu_clk(p) container_of(p, struct cpu_clk, hw)
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hwclk,
+ unsigned long parent_rate)
+{
+ struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+ u32 reg, div;
+
+ reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+ div = (reg >> (cpuclk->cpu * 8)) & SYS_CTRL_CLK_DIVIDER_MASK;
+ return parent_rate / div;
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /* Valid ratio are 1:1, 1:2 and 1:3 */
+ u32 div;
+
+ div = *parent_rate / rate;
+ if (div == 0)
+ div = 1;
+ else if (div > 3)
+ div = 3;
+
+ return *parent_rate / div;
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hwclk, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+ u32 reg, div;
+ u32 reload_mask;
+
+ div = parent_rate / rate;
+ reg = (readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET)
+ & (~(SYS_CTRL_CLK_DIVIDER_MASK << (cpuclk->cpu * 8))))
+ | (div << (cpuclk->cpu * 8));
+ writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+ /* Set clock divider reload smooth bit mask */
+ reload_mask = 1 << (20 + cpuclk->cpu);
+
+ reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+ | reload_mask;
+ writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+ /* Now trigger the clock update */
+ reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+ | 1 << 24;
+ writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+ /* Wait for clocks to settle down then clear reload request */
+ udelay(1000);
+ reg &= ~(reload_mask | 1 << 24);
+ writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+ udelay(1000);
+
+ return 0;
+}
+
+static const struct clk_ops cpu_ops = {
+ .recalc_rate = clk_cpu_recalc_rate,
+ .round_rate = clk_cpu_round_rate,
+ .set_rate = clk_cpu_set_rate,
+};
+
+void __init of_cpu_clk_setup(struct device_node *node)
+{
+ struct cpu_clk *cpuclk;
+ void __iomem *clock_complex_base = of_iomap(node, 0);
+ int cpu;
+ if (clock_complex_base == NULL) {
+ pr_err("%s: clock-complex base register not set\n",
+ __func__);
+ return;
+ }
+
+ cpuclk = kzalloc(MAX_CPU * sizeof(*cpuclk), GFP_KERNEL);
+ clks = kzalloc(MAX_CPU * sizeof(*clks), GFP_KERNEL);
+
+ if (WARN_ON(!cpuclk))
+ return;
+ for (cpu = 0; cpu < MAX_CPU; cpu++) {
+ struct clk_init_data init;
+ struct clk *clk;
+ struct clk *parent_clk;
+ char *clk_name = kzalloc(5, GFP_KERNEL);
+
+ sprintf(clk_name, "cpu%d", cpu);
+ parent_clk = of_clk_get(node, 0);
+
+ cpuclk[cpu].parent_name = __clk_get_name(parent_clk);
+ cpuclk[cpu].clk_name = clk_name;
+ cpuclk[cpu].cpu = cpu;
+ cpuclk[cpu].reg_base = clock_complex_base;
+ cpuclk[cpu].hw.init = &init;
+
+ init.name = cpuclk[cpu].clk_name;
+ init.ops = &cpu_ops;
+ init.flags = 0;
+ init.parent_names = &cpuclk[cpu].parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &cpuclk[cpu].hw);
+ if (WARN_ON(IS_ERR(clk)))
+ goto bail_out;
+ clks[cpu] = clk;
+ }
+ clk_data.clk_num = MAX_CPU;
+ clk_data.clks = clks;
+ of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
+
+ return;
+bail_out:
+ kfree(clks);
+ kfree(cpuclk);
+}
diff --git a/drivers/clk/mvebu/clk-cpu.h b/drivers/clk/mvebu/clk-cpu.h
new file mode 100644
index 0000000..e208336
--- /dev/null
+++ b/drivers/clk/mvebu/clk-cpu.h
@@ -0,0 +1,18 @@
+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MVEBU_CLK_CPU_H
+#define __MVEBU_CLK_CPU_H
+
+void __init of_cpu_clk_setup(struct device_node *node);
+
+#endif
diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c
index e6742ac..dc310d6 100644
--- a/drivers/clk/mvebu/clk.c
+++ b/drivers/clk/mvebu/clk.c
@@ -16,8 +16,22 @@
#include <linux/clk/mvebu.h>
#include <linux/of.h>
#include "clk-core.h"
+#include "clk-cpu.h"
+
+static const __initconst struct of_device_id clk_match[] = {
+#ifdef CONFIG_MVEBU_CLK_CPU
+ {
+ .compatible = "marvell,armada-xp-cpu-clockctrl",
+ .data = of_cpu_clk_setup,
+ },
+#endif
+ {
+ /* sentinel */
+ }
+};
void __init mvebu_clocks_init(void)
{
mvebu_core_clk_init();
+ of_clk_init(clk_match);
}
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/9] clk: armada-370-xp: add support for clock framework
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-17 14:22 ` [PATCH v2 1/9] clk: mvebu: add mvebu core clocks Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 2/9] clk: mvebu: add armada-370-xp CPU specific clocks Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 4/9] clocksource: convert time-armada-370-xp to clk framework Andrew Lunn
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Tested-by Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
arch/arm/boot/dts/armada-370.dtsi | 7 ++++++
arch/arm/boot/dts/armada-xp.dtsi | 42 +++++++++++++++++++++++++++++++++++
arch/arm/mach-mvebu/Kconfig | 3 +++
arch/arm/mach-mvebu/armada-370-xp.c | 9 +++++++-
4 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 2069151..dae966c 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -75,5 +75,12 @@
#interrupts-cells = <2>;
interrupts = <91>;
};
+
+ coreclk: mvebu-sar@d0018230 {
+ compatible = "marvell,armada-370-core-clocks";
+ reg = <0xd0018230 0x08>;
+ #clock-cells = <1>;
+ };
+
};
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 71d6b5d..f8382a8 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -27,6 +27,35 @@
<0xd0021870 0x58>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+ };
+
+ cpu@1 {
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ };
+
+ cpu@2 {
+ compatible = "marvell,sheeva-v7";
+ reg = <2>;
+ clocks = <&cpuclk 2>;
+ };
+
+ cpu@3 {
+ compatible = "marvell,sheeva-v7";
+ reg = <3>;
+ clocks = <&cpuclk 3>;
+ };
+ };
+
soc {
serial@d0012200 {
compatible = "ns16550";
@@ -47,6 +76,19 @@
marvell,timer-25Mhz;
};
+ coreclk: mvebu-sar@d0018230 {
+ compatible = "marvell,armada-xp-core-clocks";
+ reg = <0xd0018230 0x08>;
+ #clock-cells = <1>;
+ };
+
+ cpuclk: clock-complex@d0018700 {
+ #clock-cells = <1>;
+ compatible = "marvell,armada-xp-cpu-clockctrl";
+ reg = <0xd0018700 0xA0>;
+ clocks = <&coreclk 1>;
+ };
+
system-controller@d0018200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0xd0018200 0x500>;
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 416d46e..c7b8404 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -9,6 +9,9 @@ config ARCH_MVEBU
select PINCTRL
select PLAT_ORION
select SPARSE_IRQ
+ select CLKDEV_LOOKUP
+ select MVEBU_CLK_CORE
+ select MVEBU_CLK_CPU
if ARCH_MVEBU
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 49d7915..3292d6d 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/time-armada-370-xp.h>
+#include <linux/clk/mvebu.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -37,8 +38,14 @@ void __init armada_370_xp_map_io(void)
iotable_init(armada_370_xp_io_desc, ARRAY_SIZE(armada_370_xp_io_desc));
}
+void __init armada_370_xp_timer_and_clk_init(void)
+{
+ mvebu_clocks_init();
+ armada_370_xp_timer_init();
+}
+
struct sys_timer armada_370_xp_timer = {
- .init = armada_370_xp_timer_init,
+ .init = armada_370_xp_timer_and_clk_init,
};
static void __init armada_370_xp_dt_init(void)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 4/9] clocksource: convert time-armada-370-xp to clk framework
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (2 preceding siblings ...)
2012-11-17 14:22 ` [PATCH v2 3/9] clk: armada-370-xp: add support for clock framework Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 5/9] clk: mvebu: add clock gating control provider for DT Andrew Lunn
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Tested-by Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
.../devicetree/bindings/arm/armada-370-xp-timer.txt | 1 +
arch/arm/boot/dts/armada-370-db.dts | 4 ----
arch/arm/boot/dts/armada-370-xp.dtsi | 1 +
drivers/clocksource/time-armada-370-xp.c | 11 ++++++-----
4 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
index 8b6ea22..6483011 100644
--- a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
+++ b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: Should be "marvell,armada-370-xp-timer"
- interrupts: Should contain the list of Global Timer interrupts
- reg: Should contain the base address of the Global Timer registers
+- clocks: clock driving the timer hardware
Optional properties:
- marvell,timer-25Mhz: Tells whether the Global timer supports the 25
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index fffd5c2..4a31b03 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -34,9 +34,5 @@
clock-frequency = <200000000>;
status = "okay";
};
- timer@d0020300 {
- clock-frequency = <600000000>;
- status = "okay";
- };
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 16cc82c..94b4b9e 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -62,6 +62,7 @@
compatible = "marvell,armada-370-xp-timer";
reg = <0xd0020300 0x30>;
interrupts = <37>, <38>, <39>, <40>;
+ clocks = <&coreclk 2>;
};
addr-decoding@d0020000 {
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 4674f94..a4605fd 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
+#include <linux/clk.h>
#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
@@ -167,7 +168,6 @@ void __init armada_370_xp_timer_init(void)
u32 u;
struct device_node *np;
unsigned int timer_clk;
- int ret;
np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
timer_base = of_iomap(np, 0);
WARN_ON(!timer_base);
@@ -179,13 +179,14 @@ void __init armada_370_xp_timer_init(void)
timer_base + TIMER_CTRL_OFF);
timer_clk = 25000000;
} else {
- u32 clk = 0;
- ret = of_property_read_u32(np, "clock-frequency", &clk);
- WARN_ON(!clk || ret < 0);
+ unsigned long rate = 0;
+ struct clk *clk = of_clk_get(np, 0);
+ WARN_ON(IS_ERR(clk));
+ rate = clk_get_rate(clk);
u = readl(timer_base + TIMER_CTRL_OFF);
writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
timer_base + TIMER_CTRL_OFF);
- timer_clk = clk / TIMER_DIVIDER;
+ timer_clk = rate / TIMER_DIVIDER;
}
/* We use timer 0 as clocksource, and timer 1 for
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 5/9] clk: mvebu: add clock gating control provider for DT
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (3 preceding siblings ...)
2012-11-17 14:22 ` [PATCH v2 4/9] clocksource: convert time-armada-370-xp to clk framework Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 6/9] ARM: dove: switch to DT clock providers Andrew Lunn
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM,
Sebastian Hesselbarth
From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This driver allows to provide DT clocks for clock gates found on
Marvell Dove and Kirkwood SoCs. The clock gates are referenced by
the phandle index of the corresponding bit in the clock gating control
register to ease lookup in the datasheet.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../bindings/clock/mvebu-gated-clock.txt | 76 +++++++++
drivers/clk/mvebu/Kconfig | 2 +
drivers/clk/mvebu/Makefile | 1 +
drivers/clk/mvebu/clk-gating-ctrl.c | 177 ++++++++++++++++++++
include/linux/clk/mvebu.h | 1 +
5 files changed, 257 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
create mode 100644 drivers/clk/mvebu/clk-gating-ctrl.c
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
new file mode 100644
index 0000000..4ad8ccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -0,0 +1,76 @@
+* Gated Clock bindings for Marvell Orion SoCs
+
+Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save
+some power. The clock consumer should specify the desired clock by having
+the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
+the corresponding clock gating control bit in HW to ease manual clock lookup
+in datasheet.
+
+The following is a list of provided IDs for Dove:
+ID Clock Peripheral
+-----------------------------------
+0 usb0 USB Host 0
+1 usb1 USB Host 1
+2 ge Gigabit Ethernet
+3 sata SATA Host
+4 pex0 PCIe Cntrl 0
+5 pex1 PCIe Cntrl 1
+8 sdio0 SDHCI Host 0
+9 sdio1 SDHCI Host 1
+10 nand NAND Cntrl
+11 camera Camera Cntrl
+12 i2s0 I2S Cntrl 0
+13 i2s1 I2S Cntrl 1
+15 crypto CESA engine
+21 ac97 AC97 Cntrl
+22 pdma Peripheral DMA
+23 xor0 XOR DMA 0
+24 xor1 XOR DMA 1
+30 gephy Gigabit Ethernel PHY
+Note: gephy(30) is implemented as a parent clock of ge(2)
+
+The following is a list of provided IDs for Kirkwood:
+ID Clock Peripheral
+-----------------------------------
+0 ge0 Gigabit Ethernet 0
+2 pex0 PCIe Cntrl 0
+3 usb0 USB Host 0
+4 sdio SDIO Cntrl
+5 tsu Transp. Stream Unit
+6 dunit SDRAM Cntrl
+7 runit Runit
+8 xor0 XOR DMA 0
+9 audio I2S Cntrl 0
+14 sata0 SATA Host 0
+15 sata1 SATA Host 1
+16 xor1 XOR DMA 1
+17 crypto CESA engine
+18 pex1 PCIe Cntrl 1
+19 ge1 Gigabit Ethernet 0
+20 tdm Time Division Mplx
+
+Required properties:
+- compatible : shall be one of the following:
+ "marvell,dove-gating-clock" - for Dove SoC clock gating
+ "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
+- reg : shall be the register address of the Clock Gating Control register
+- #clock-cells : from common clock binding; shall be set to 1
+
+Optional properties:
+- clocks : default parent clock phandle (e.g. tclk)
+
+Example:
+
+gate_clk: clock-gating-control@d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ /* default parent clock is tclk */
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+};
+
+sdio0: sdio@92000 {
+ compatible = "marvell,dove-sdhci";
+ /* get clk gate bit 8 (sdio0) */
+ clocks = <&gate_clk 8>;
+};
diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index 1dd93ad..57323fd 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -4,3 +4,5 @@ config MVEBU_CLK_CORE
config MVEBU_CLK_CPU
bool
+config MVEBU_CLK_GATING
+ bool
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index 93da083..58df3dc 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o
obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o
+obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o
diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c
new file mode 100644
index 0000000..424faff
--- /dev/null
+++ b/drivers/clk/mvebu/clk-gating-ctrl.c
@@ -0,0 +1,177 @@
+/*
+ * Marvell MVEBU clock gating control.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+struct mvebu_gating_ctrl {
+ spinlock_t lock;
+ struct clk **gates;
+ int num_gates;
+};
+
+struct mvebu_soc_descr {
+ const char *name;
+ const char *parent;
+ int bit_idx;
+};
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static struct clk __init *mvebu_clk_gating_get_src(
+ struct of_phandle_args *clkspec, void *data)
+{
+ struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data;
+ int n;
+
+ if (clkspec->args_count < 1)
+ return ERR_PTR(-EINVAL);
+
+ for (n = 0; n < ctrl->num_gates; n++) {
+ struct clk_gate *gate =
+ to_clk_gate(__clk_get_hw(ctrl->gates[n]));
+ if (clkspec->args[0] == gate->bit_idx)
+ return ctrl->gates[n];
+ }
+ return ERR_PTR(-ENODEV);
+}
+
+static void __init mvebu_clk_gating_setup(
+ struct device_node *np, const struct mvebu_soc_descr *descr)
+{
+ struct mvebu_gating_ctrl *ctrl;
+ struct clk *clk;
+ void __iomem *base;
+ const char *default_parent = NULL;
+ int n;
+
+ base = of_iomap(np, 0);
+
+ clk = of_clk_get(np, 0);
+ if (!IS_ERR(clk)) {
+ default_parent = __clk_get_name(clk);
+ clk_put(clk);
+ }
+
+ ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL);
+ if (WARN_ON(!ctrl))
+ return;
+
+ spin_lock_init(&ctrl->lock);
+
+ /*
+ * Count, allocate, and register clock gates
+ */
+ for (n = 0; descr[n].name;)
+ n++;
+
+ ctrl->num_gates = n;
+ ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *),
+ GFP_KERNEL);
+ if (WARN_ON(!ctrl->gates)) {
+ kfree(ctrl);
+ return;
+ }
+
+ for (n = 0; n < ctrl->num_gates; n++) {
+ const char *parent =
+ (descr[n].parent) ? descr[n].parent : default_parent;
+ ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent,
+ 0, base, descr[n].bit_idx, 0, &ctrl->lock);
+ WARN_ON(IS_ERR(ctrl->gates[n]));
+ }
+ of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl);
+}
+
+/*
+ * SoC specific clock gating control
+ */
+
+#ifdef CONFIG_ARCH_DOVE
+static const struct mvebu_soc_descr __initconst dove_gating_descr[] = {
+ { "usb0", NULL, 0 },
+ { "usb1", NULL, 1 },
+ { "ge", "gephy", 2 },
+ { "sata", NULL, 3 },
+ { "pex0", NULL, 4 },
+ { "pex1", NULL, 5 },
+ { "sdio0", NULL, 8 },
+ { "sdio1", NULL, 9 },
+ { "nand", NULL, 10 },
+ { "camera", NULL, 11 },
+ { "i2s0", NULL, 12 },
+ { "i2s1", NULL, 13 },
+ { "crypto", NULL, 15 },
+ { "ac97", NULL, 21 },
+ { "pdma", NULL, 22 },
+ { "xor0", NULL, 23 },
+ { "xor1", NULL, 24 },
+ { "gephy", NULL, 30 },
+ { }
+};
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = {
+ { "ge0", NULL, 0 },
+ { "pex0", NULL, 2 },
+ { "usb0", NULL, 3 },
+ { "sdio", NULL, 4 },
+ { "tsu", NULL, 5 },
+ { "runit", NULL, 7 },
+ { "xor0", NULL, 8 },
+ { "audio", NULL, 9 },
+ { "sata0", NULL, 14 },
+ { "sata1", NULL, 15 },
+ { "xor1", NULL, 16 },
+ { "crypto", NULL, 17 },
+ { "pex1", NULL, 18 },
+ { "ge1", NULL, 19 },
+ { "tdm", NULL, 20 },
+ { }
+};
+#endif
+
+static const __initdata struct of_device_id clk_gating_match[] = {
+#ifdef CONFIG_ARCH_DOVE
+ {
+ .compatible = "marvell,dove-gating-clock",
+ .data = dove_gating_descr,
+ },
+#endif
+
+#ifdef CONFIG_ARCH_KIRKWOOD
+ {
+ .compatible = "marvell,kirkwood-gating-clock",
+ .data = kirkwood_gating_descr,
+ },
+#endif
+
+ { }
+};
+
+void __init mvebu_clk_gating_init(void)
+{
+ struct device_node *np;
+
+ for_each_matching_node(np, clk_gating_match) {
+ const struct of_device_id *match =
+ of_match_node(clk_gating_match, np);
+ mvebu_clk_gating_setup(np,
+ (const struct mvebu_soc_descr *)match->data);
+ }
+}
diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h
index 8c4ae71..70c366f 100644
--- a/include/linux/clk/mvebu.h
+++ b/include/linux/clk/mvebu.h
@@ -18,5 +18,6 @@
#define __CLK_MVEBU_H_
void __init mvebu_clocks_init(void);
+void mvebu_clk_gating_init(void);
#endif
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 6/9] ARM: dove: switch to DT clock providers
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (4 preceding siblings ...)
2012-11-17 14:22 ` [PATCH v2 5/9] clk: mvebu: add clock gating control provider for DT Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 7/9] ARM: Kirkwood: " Andrew Lunn
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM,
Sebastian Hesselbarth
From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
With true DT clock providers available switch Dove clock setup in DT-
enabled boards. While AUXDATA can be removed completely from bus probing,
some devices still don't know about DT at all. Therefore, some clock
aliases are created until the devices also move to DT.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/dove.dtsi | 20 ++++++++++++++
arch/arm/mach-dove/Kconfig | 2 ++
arch/arm/mach-dove/common.c | 64 +++++++++++++++++++++++++++++++++----------
4 files changed, 72 insertions(+), 15 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ade7e92..0590099 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -533,6 +533,7 @@ config ARCH_IXP4XX
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
+ select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 5a00022..8c8ab62 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -31,6 +31,19 @@
reg = <0x20204 0x04>, <0x20214 0x04>;
};
+ core_clk: core-clocks@d0214 {
+ compatible = "marvell,dove-core-clocks";
+ reg = <0xd0214 0x4>;
+ #clock-cells = <1>;
+ };
+
+ gate_clk: clock-gating-control@d0038 {
+ compatible = "marvell,dove-gating-clock";
+ reg = <0xd0038 0x4>;
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+ };
+
uart0: serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
@@ -100,6 +113,7 @@
cell-index = <0>;
interrupts = <6>;
reg = <0x10600 0x28>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
@@ -110,6 +124,7 @@
cell-index = <1>;
interrupts = <5>;
reg = <0x14600 0x28>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
@@ -121,6 +136,7 @@
interrupts = <11>;
clock-frequency = <400000>;
timeout-ms = <1000>;
+ clocks = <&core_clk 0>;
status = "disabled";
};
@@ -128,6 +144,7 @@
compatible = "marvell,dove-sdhci";
reg = <0x92000 0x100>;
interrupts = <35>, <37>;
+ clocks = <&gate_clk 8>;
status = "disabled";
};
@@ -135,6 +152,7 @@
compatible = "marvell,dove-sdhci";
reg = <0x90000 0x100>;
interrupts = <36>, <38>;
+ clocks = <&gate_clk 9>;
status = "disabled";
};
@@ -142,6 +160,7 @@
compatible = "marvell,orion-sata";
reg = <0xa0000 0x2400>;
interrupts = <62>;
+ clocks = <&gate_clk 3>;
nr-ports = <1>;
status = "disabled";
};
@@ -152,6 +171,7 @@
<0xc8000000 0x800>;
reg-names = "regs", "sram";
interrupts = <31>;
+ clocks = <&gate_clk 15>;
status = "okay";
};
};
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 00154e7..603c5fd 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -17,6 +17,8 @@ config MACH_CM_A510
config MACH_DOVE_DT
bool "Marvell Dove Flattened Device Tree"
+ select MVEBU_CLK_CORE
+ select MVEBU_CLK_GATING
select USE_OF
help
Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index f723fe1..4b09d12 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
#include <linux/of.h>
@@ -376,19 +377,53 @@ void dove_restart(char mode, const char *cmd)
#if defined(CONFIG_MACH_DOVE_DT)
/*
- * Auxdata required until real OF clock provider
+ * There are still devices that doesn't even know about DT,
+ * get clock gates here and add a clock lookup.
*/
-struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
- OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
- OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
- OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
- NULL),
- OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
- OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
- OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
- {},
-};
+static void __init dove_legacy_clk_init(void)
+{
+ struct device_node *np = of_find_compatible_node(NULL, NULL,
+ "marvell,dove-gating-clock");
+ struct of_phandle_args clkspec;
+
+ clkspec.np = np;
+ clkspec.args_count = 1;
+
+ clkspec.args[0] = CLOCK_GATING_BIT_USB0;
+ orion_clkdev_add(NULL, "orion-ehci.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_USB1;
+ orion_clkdev_add(NULL, "orion-ehci.1",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_GBE;
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
+ orion_clkdev_add("0", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
+ orion_clkdev_add("1", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_XOR0;
+ orion_clkdev_add(NULL, "mv_xor_shared.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_XOR1;
+ orion_clkdev_add(NULL, "mv_xor_shared.1",
+ of_clk_get_from_provider(&clkspec));
+}
+
+static void __init dove_of_clk_init(void)
+{
+ mvebu_clocks_init();
+ mvebu_clk_gating_init();
+ dove_legacy_clk_init();
+}
static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
@@ -405,7 +440,7 @@ static void __init dove_dt_init(void)
dove_setup_cpu_mbus();
/* Setup root of clk tree */
- dove_clk_init();
+ dove_of_clk_init();
/* Internal devices not ported to DT yet */
dove_rtc_init();
@@ -417,8 +452,7 @@ static void __init dove_dt_init(void)
dove_ehci1_init();
dove_pcie_init(1, 1);
- of_platform_populate(NULL, of_default_bus_match_table,
- dove_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const dove_dt_board_compat[] = {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 7/9] ARM: Kirkwood: switch to DT clock providers
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (5 preceding siblings ...)
2012-11-17 14:22 ` [PATCH v2 6/9] ARM: dove: switch to DT clock providers Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 8/9] clk: mvebu: armada 370/XP add clock gating control provider for DT Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 9/9] arm: mvebu: armada 370/XP adding clock gating support: dt binding Andrew Lunn
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Andrew Lunn, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
With true DT clock providers available switch Kirkwood clock setup in
DT- enabled boards. While AUXDATA can be removed completely from bus
probing, some devices still don't know about DT. Therefore, some clkdev
aliases are created until these devices also move to DT.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
---
arch/arm/boot/dts/kirkwood.dtsi | 22 +++++++++
arch/arm/mach-kirkwood/Kconfig | 2 +
arch/arm/mach-kirkwood/board-dt.c | 72 +++++++++++++++++++++++------
arch/arm/plat-orion/include/plat/common.h | 1 +
4 files changed, 84 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 4e5b815..e5ebf42 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -19,6 +19,12 @@
#address-cells = <1>;
#size-cells = <1>;
+ core_clk: core-clocks@10030 {
+ compatible = "marvell,kirkwood-core-clocks";
+ reg = <0x10030 0x4>;
+ #clock-cells = <1>;
+ };
+
gpio0: gpio@10100 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
@@ -42,6 +48,7 @@
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <33>;
+ clocks = <&gate_clk 7>;
/* set clock-frequency in board dts */
status = "disabled";
};
@@ -51,6 +58,7 @@
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <34>;
+ clocks = <&gate_clk 7>;
/* set clock-frequency in board dts */
status = "disabled";
};
@@ -68,12 +76,21 @@
cell-index = <0>;
interrupts = <23>;
reg = <0x10600 0x28>;
+ clocks = <&gate_clk 7>;
status = "disabled";
};
+ gate_clk: clock-gating-control@2011c {
+ compatible = "marvell,kirkwood-gating-clock";
+ reg = <0x2011c 0x4>;
+ clocks = <&core_clk 0>;
+ #clock-cells = <1>;
+ };
+
wdt@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
+ clocks = <&gate_clk 7>;
status = "okay";
};
@@ -81,6 +98,8 @@
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
+ clocks = <&gate_clk 14>, <&gate_clk 15>;
+ clock-names = "0", "1";
status = "disabled";
};
@@ -94,6 +113,7 @@
reg = <0x3000000 0x400>;
chip-delay = <25>;
/* set partition map and/or chip-delay in board dts */
+ clocks = <&gate_clk 7>;
status = "disabled";
};
@@ -104,6 +124,7 @@
#size-cells = <0>;
interrupts = <29>;
clock-frequency = <100000>;
+ clocks = <&gate_clk 7>;
status = "disabled";
};
@@ -113,6 +134,7 @@
<0xf5000000 0x800>;
reg-names = "regs", "sram";
interrupts = <22>;
+ clocks = <&gate_clk 17>;
status = "okay";
};
};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 50bca50..2833492 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -46,6 +46,8 @@ config MACH_GURUPLUG
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
+ select MVEBU_CLK_CORE
+ select MVEBU_CLK_GATING
select USE_OF
help
Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index d94872f..ffec16c 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -14,11 +14,15 @@
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
+#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/irq.h>
+#include <plat/common.h>
#include "common.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -26,16 +30,59 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ }
};
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
- OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
- NULL),
- OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
- OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
- OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL),
- OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1030000, "mv_crypto", NULL),
- {},
-};
+/*
+ * There are still devices that doesn't know about DT yet. Get clock
+ * gates here and add a clock lookup alias, so that old platform
+ * devices still work.
+*/
+
+static void __init kirkwood_legacy_clk_init(void)
+{
+
+ struct device_node *np = of_find_compatible_node(
+ NULL, NULL, "marvell,kirkwood-gating-clock");
+
+ struct of_phandle_args clkspec;
+
+ clkspec.np = np;
+ clkspec.args_count = 1;
+
+ clkspec.args[0] = CGC_BIT_GE0;
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_PEX0;
+ orion_clkdev_add("0", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_USB0;
+ orion_clkdev_add(NULL, "orion-ehci.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_XOR0;
+ orion_clkdev_add(NULL, "mv_xor_shared.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_XOR1;
+ orion_clkdev_add(NULL, "mv_xor_shared.1",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_PEX1;
+ orion_clkdev_add("1", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+ of_clk_get_from_provider(&clkspec));
+
+}
+
+static void __init kirkwood_of_clk_init(void)
+{
+ mvebu_clocks_init();
+ mvebu_clk_gating_init();
+ kirkwood_legacy_clk_init();
+}
static void __init kirkwood_dt_init(void)
{
@@ -54,7 +101,7 @@ static void __init kirkwood_dt_init(void)
kirkwood_l2_init();
/* Setup root of clk tree */
- kirkwood_clk_init();
+ kirkwood_of_clk_init();
/* internal devices that every board has */
kirkwood_xor0_init();
@@ -94,8 +141,7 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
- of_platform_populate(NULL, kirkwood_dt_match_table,
- kirkwood_auxdata_lookup, NULL);
+ of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
static const char *kirkwood_dt_board_compat[] = {
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 6bbc3fe..e06fc5f 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -12,6 +12,7 @@
#include <linux/mv643xx_eth.h>
struct dsa_platform_data;
+struct mv_sata_platform_data;
void __init orion_uart0_init(void __iomem *membase,
resource_size_t mapbase,
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 8/9] clk: mvebu: armada 370/XP add clock gating control provider for DT
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (6 preceding siblings ...)
2012-11-17 14:22 ` [PATCH v2 7/9] ARM: Kirkwood: " Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 9/9] arm: mvebu: armada 370/XP adding clock gating support: dt binding Andrew Lunn
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Andrew Lunn, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
---
.../bindings/clock/mvebu-gated-clock.txt | 43 ++++++++++++++
arch/arm/mach-mvebu/Kconfig | 1 +
drivers/clk/mvebu/clk-gating-ctrl.c | 61 ++++++++++++++++++++
3 files changed, 105 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 4ad8ccd..7337005 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -6,6 +6,49 @@ the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to
the corresponding clock gating control bit in HW to ease manual clock lookup
in datasheet.
+The following is a list of provided IDs for Armada 370:
+ID Clock Peripheral
+-----------------------------------
+0 Audio AC97 Cntrl
+1 pex0_en PCIe 0 Clock out
+2 pex1_en PCIe 1 Clock out
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+9 pex1 PCIe Cntrl 1
+15 sata0 SATA Host 0
+17 sdio SDHCI Host
+25 tdm Time Division Mplx
+28 ddr DDR Cntrl
+30 sata1 SATA Host 0
+
+The following is a list of provided IDs for Armada XP:
+ID Clock Peripheral
+-----------------------------------
+0 audio Audio Cntrl
+1 ge3 Gigabit Ethernet 3
+2 ge2 Gigabit Ethernet 2
+3 ge1 Gigabit Ethernet 1
+4 ge0 Gigabit Ethernet 0
+5 pex0 PCIe Cntrl 0
+6 pex1 PCIe Cntrl 1
+7 pex2 PCIe Cntrl 2
+8 pex3 PCIe Cntrl 3
+13 bp
+14 sata0lnk
+15 sata0 SATA Host 0
+16 lcd LCD Cntrl
+17 sdio SDHCI Host
+18 usb0 USB Host 0
+19 usb1 USB Host 1
+20 usb2 USB Host 2
+22 xor0 XOR DMA 0
+23 crypto CESA engine
+25 tdm Time Division Mplx
+28 xor1 XOR DMA 1
+29 sata1lnk
+30 sata1 SATA Host 0
+
The following is a list of provided IDs for Dove:
ID Clock Peripheral
-----------------------------------
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index c7b8404..79299cd 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -12,6 +12,7 @@ config ARCH_MVEBU
select CLKDEV_LOOKUP
select MVEBU_CLK_CORE
select MVEBU_CLK_CPU
+ select MVEBU_CLK_GATING
if ARCH_MVEBU
diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c
index 424faff..e640d5c 100644
--- a/drivers/clk/mvebu/clk-gating-ctrl.c
+++ b/drivers/clk/mvebu/clk-gating-ctrl.c
@@ -101,6 +101,53 @@ static void __init mvebu_clk_gating_setup(
* SoC specific clock gating control
*/
+#ifdef CONFIG_MACH_ARMADA_370
+static const struct mvebu_soc_descr __initconst armada_370_gating_descr[] = {
+ { "audio", NULL, 0 },
+ { "pex0_en", NULL, 1 },
+ { "pex1_en", NULL, 2 },
+ { "ge1", NULL, 3 },
+ { "ge0", NULL, 4 },
+ { "pex0", NULL, 5 },
+ { "pex1", NULL, 9 },
+ { "sata0", NULL, 15 },
+ { "sdio", NULL, 17 },
+ { "tdm", NULL, 25 },
+ { "ddr", NULL, 28 },
+ { "sata1", NULL, 30 },
+ { }
+};
+#endif
+
+#ifdef CONFIG_MACH_ARMADA_XP
+static const struct mvebu_soc_descr __initconst armada_xp_gating_descr[] = {
+ { "audio", NULL, 0 },
+ { "ge3", NULL, 1 },
+ { "ge2", NULL, 2 },
+ { "ge1", NULL, 3 },
+ { "ge0", NULL, 4 },
+ { "pex0", NULL, 5 },
+ { "pex1", NULL, 6 },
+ { "pex2", NULL, 7 },
+ { "pex3", NULL, 8 },
+ { "bp", NULL, 13 },
+ { "sata0lnk", NULL, 14 },
+ { "sata0", NULL, 15 },
+ { "lcd", NULL, 16 },
+ { "sdio", NULL, 17 },
+ { "usb0", NULL, 18 },
+ { "usb1", NULL, 19 },
+ { "usb2", NULL, 20 },
+ { "xor0", NULL, 22 },
+ { "crypto", NULL, 23 },
+ { "tdm", NULL, 25 },
+ { "xor1", NULL, 28 },
+ { "sata1lnk", NULL, 29 },
+ { "sata1", NULL, 30 },
+ { }
+};
+#endif
+
#ifdef CONFIG_ARCH_DOVE
static const struct mvebu_soc_descr __initconst dove_gating_descr[] = {
{ "usb0", NULL, 0 },
@@ -147,6 +194,20 @@ static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = {
#endif
static const __initdata struct of_device_id clk_gating_match[] = {
+#ifdef CONFIG_MACH_ARMADA_370
+ {
+ .compatible = "marvell,armada-370-gating-clock",
+ .data = armada_370_gating_descr,
+ },
+#endif
+
+#ifdef CONFIG_MACH_ARMADA_XP
+ {
+ .compatible = "marvell,armada-xp-gating-clock",
+ .data = armada_xp_gating_descr,
+ },
+#endif
+
#ifdef CONFIG_ARCH_DOVE
{
.compatible = "marvell,dove-gating-clock",
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 9/9] arm: mvebu: armada 370/XP adding clock gating support: dt binding
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
` (7 preceding siblings ...)
2012-11-17 14:22 ` [PATCH v2 8/9] clk: mvebu: armada 370/XP add clock gating control provider for DT Andrew Lunn
@ 2012-11-17 14:22 ` Andrew Lunn
8 siblings, 0 replies; 10+ messages in thread
From: Andrew Lunn @ 2012-11-17 14:22 UTC (permalink / raw)
To: mturquette-QSEj5FYQhm4dnm+yROfE0A
Cc: Thomas Petazzoni, Andrew Lunn, Jason Cooper,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux ARM
From: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
---
arch/arm/boot/dts/armada-370.dtsi | 8 ++++++++
arch/arm/boot/dts/armada-xp.dtsi | 7 +++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index dae966c..20ce596 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -82,5 +82,13 @@
#clock-cells = <1>;
};
+ gateclk: clock-gating-control@d0018220 {
+ compatible = "marvell,armada-370-gating-clock";
+ reg = <0xd0018220 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
+
};
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index f8382a8..9b0da25 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -89,6 +89,13 @@
clocks = <&coreclk 1>;
};
+ gateclk: clock-gating-control@d001821c {
+ compatible = "marvell,armada-xp-gating-clock";
+ reg = <0xd001821c 0x4>;
+ clocks = <&coreclk 0>;
+ #clock-cells = <1>;
+ };
+
system-controller@d0018200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0xd0018200 0x500>;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-11-17 14:22 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-17 14:22 [PATCH v2 0/9] core, cpu and gated clocks for mvebu Andrew Lunn
[not found] ` <1353162150-522-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2012-11-17 14:22 ` [PATCH v2 1/9] clk: mvebu: add mvebu core clocks Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 2/9] clk: mvebu: add armada-370-xp CPU specific clocks Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 3/9] clk: armada-370-xp: add support for clock framework Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 4/9] clocksource: convert time-armada-370-xp to clk framework Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 5/9] clk: mvebu: add clock gating control provider for DT Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 6/9] ARM: dove: switch to DT clock providers Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 7/9] ARM: Kirkwood: " Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 8/9] clk: mvebu: armada 370/XP add clock gating control provider for DT Andrew Lunn
2012-11-17 14:22 ` [PATCH v2 9/9] arm: mvebu: armada 370/XP adding clock gating support: dt binding Andrew Lunn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).