[PATCH v6 0/7] watchdog: dt: add support for the timeout-sec dt property

[PATCH v6 0/7] watchdog: dt: add support for the timeout-sec dt property

[Fabio Porcedda]

Hi all,
this patchset add the timeout-sec property to the watchdog core,
to the at91sam9_wdt driver and on all framework enabled watchdog driver
with dt support.
The at91sam9_wdt is tested on evk-pr3,
the other drivers are compile tested only.

This patchset depends on the patchset already sent:
"[PATCH v9 0/3 RESEND] watchdog: at91sam9_wdt: add device tree support"
that is already pulled in arm-soc/for-next branch.

Best regards
Fabio Porcedda

changes:
v6:
  - remove patch for function of_get_timeout_sec as aked by Rob Herring
  - add Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
  - add Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
v5:
  - fix codestyle for compilance ti checkpatch.pl about
    "ERROR: do not initialise statics to 0 or NULL"
    for s3c2410_wdt.c:56 and at91sam9_wdt.c:63
v4:
  - add of_get_timeout_sec
  - add s3c2410_wdt driver
  - split driver patch
  - fixed watchdog_init_timeout handling of min_timeout and max_timeout
v3:
  - rename watchdog_probe_dt_timeout ->  watchdog_init_timeout
  - move the watchdog_init_timeout function from inline to watchdog_core.c
  - add timeout parameter handling code to watchdog_init_timeout
  - add timeout-sec property to the pnx4008-wdt driver
  - add two small commit for fixup and cleanup
v2:
  - change "timeout" to "timeout-sec" as asked by Jean-Christophe
  - at91sam9_wdt: use the new helper function
  - at91sam9_wdt: add bounds checking
  - watchdog.h: add bounds checking

Fabio Porcedda (7):
  watchdog: core: dt: add support for the timeout-sec dt property
  watchdog: orion_wdt: add timeout-sec property binding
  watchdog: pnx4008: add timeout-sec property binding
  watchdog: s3c2410_wdt: add timeout-sec property binding
  watchdog: at91sam9_wdt: add timeout-sec property binding
  watchdog: orion_wdt: move the min_timeout initialization
  watchdog: WatchDog Timer Driver Core - fix comment

 .../devicetree/bindings/watchdog/atmel-wdt.txt     |  4 +++
 .../devicetree/bindings/watchdog/marvel.txt        |  5 +++
 .../devicetree/bindings/watchdog/pnx4008-wdt.txt   |  4 +++
 .../devicetree/bindings/watchdog/samsung-wdt.txt   |  3 ++
 Documentation/watchdog/watchdog-kernel-api.txt     | 10 ++++++
 drivers/watchdog/Kconfig                           |  1 +
 drivers/watchdog/at91sam9_wdt.c                    | 16 ++++++++--
 drivers/watchdog/orion_wdt.c                       | 10 +++---
 drivers/watchdog/pnx4008_wdt.c                     |  7 ++--
 drivers/watchdog/s3c2410_wdt.c                     |  6 ++--
 drivers/watchdog/watchdog_core.c                   | 37 ++++++++++++++++++++++
 include/linux/watchdog.h                           |  5 ++-
 12 files changed, 92 insertions(+), 16 deletions(-)

-- 
1.8.0

[PATCH v6 1/7] watchdog: core: dt: add support for the timeout-sec dt property

[Fabio Porcedda]

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/watchdog/watchdog-kernel-api.txt | 10 +++++++
 drivers/watchdog/watchdog_core.c               | 37 ++++++++++++++++++++++++++
 include/linux/watchdog.h                       |  3 +++
 3 files changed, 50 insertions(+)

diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt
index 086638f..44098c2 100644
--- a/Documentation/watchdog/watchdog-kernel-api.txt
+++ b/Documentation/watchdog/watchdog-kernel-api.txt
@@ -212,3 +212,13 @@ driver specific data to and a pointer to the data itself.
 The watchdog_get_drvdata function allows you to retrieve driver specific data.
 The argument of this function is the watchdog device where you want to retrieve
 data from. The function returns the pointer to the driver specific data.
+
+To initialize the timeout field use the following function:
+
+extern void watchdog_init_timeout(struct watchdog_device *wdd,
+                                  unsigned int parm_timeout,
+                                  struct device_node *node);
+
+The watchdog_init_timeout function allows you to initialize the timeout field
+using the module timeout parameter or retrieving the timeout-sec property from
+the device tree.
diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
index 3796434..758a285 100644
--- a/drivers/watchdog/watchdog_core.c
+++ b/drivers/watchdog/watchdog_core.c
@@ -36,12 +36,49 @@
 #include <linux/init.h>		/* For __init/__exit/... */
 #include <linux/idr.h>		/* For ida_* macros */
 #include <linux/err.h>		/* For IS_ERR macros */
+#include <linux/of.h>		/* For of_get_timeout_sec */
 
 #include "watchdog_core.h"	/* For watchdog_dev_register/... */
 
 static DEFINE_IDA(watchdog_ida);
 static struct class *watchdog_class;
 
+static bool watchdog_is_valid_timeout(struct watchdog_device *wdd,
+				      unsigned int t)
+
+{
+	if (wdd->min_timeout < wdd->max_timeout)
+		return (wdd->min_timeout <= t) && (t <= wdd->max_timeout);
+	else
+		return (t > 0);
+}
+
+/**
+ * watchdog_init_timeout() - initialize the timeout field
+ * @parm: timeout module parameter, it takes precedence over the
+ *        timeout-sec property.
+ * @node: Retrieve the timeout-sec property only if the parm_timeout
+ *        is out of bounds.
+ */
+void watchdog_init_timeout(struct watchdog_device *wdd, unsigned int parm,
+			   struct device_node *node)
+{
+	unsigned int t = 0;
+
+	if (watchdog_is_valid_timeout(wdd, parm)) {
+		wdd->timeout = parm;
+		return;
+	}
+
+	/* try to get the timeout_sec property */
+	if (!node)
+		return;
+	of_property_read_u32(node, "timeout-sec", &t);
+	if (watchdog_is_valid_timeout(wdd, t))
+		wdd->timeout = t;
+}
+EXPORT_SYMBOL_GPL(watchdog_init_timeout);
+
 /**
  * watchdog_register_device() - register a watchdog device
  * @wdd: watchdog device
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index b7f45d4..5cff9d6 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -130,6 +130,9 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
 }
 
 /* drivers/watchdog/core/watchdog_core.c */
+extern void watchdog_init_timeout(struct watchdog_device *wdd,
+				  unsigned int parm_timeout,
+				  struct device_node *node);
 extern int watchdog_register_device(struct watchdog_device *);
 extern void watchdog_unregister_device(struct watchdog_device *);
 
-- 
1.8.0

[PATCH v6 2/7] watchdog: orion_wdt: add timeout-sec property binding

[Fabio Porcedda]

Only compile tested.

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
 Documentation/devicetree/bindings/watchdog/marvel.txt | 5 +++++
 drivers/watchdog/orion_wdt.c                          | 8 +++-----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 0b2503a..5dc8d30 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
@@ -5,10 +5,15 @@ Required Properties:
 - Compatibility : "marvell,orion-wdt"
 - reg		: Address of the timer registers
 
+Optional properties:
+
+- timeout-sec	: Contains the watchdog timeout in seconds
+
 Example:
 
 	wdt@20300 {
 		compatible = "marvell,orion-wdt";
 		reg = <0x20300 0x28>;
+		timeout-sec = <10>;
 		status = "okay";
 	};
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index c20f96b..446a3e9 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -162,12 +162,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
 
-	if ((heartbeat < 1) || (heartbeat > wdt_max_duration))
-		heartbeat = wdt_max_duration;
-
-	orion_wdt.timeout = heartbeat;
 	orion_wdt.min_timeout = 1;
+	orion_wdt.timeout = wdt_max_duration;
 	orion_wdt.max_timeout = wdt_max_duration;
+	watchdog_init_timeout(&orion_wdt, heartbeat, pdev->dev.of_node);
 
 	watchdog_set_nowayout(&orion_wdt, nowayout);
 	ret = watchdog_register_device(&orion_wdt);
@@ -177,7 +175,7 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
 	}
 
 	pr_info("Initial timeout %d sec%s\n",
-		heartbeat, nowayout ? ", nowayout" : "");
+		orion_wdt.timeout, nowayout ? ", nowayout" : "");
 	return 0;
 }
 
-- 
1.8.0

[PATCH v6 3/7] watchdog: pnx4008: add timeout-sec property binding

[Fabio Porcedda]

Only compile tested.

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>
Cc: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Masanari Iida <standby24x7-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt | 4 ++++
 drivers/watchdog/pnx4008_wdt.c                             | 7 +++----
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
index 7c7f688..556d06c 100644
--- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt
@@ -5,9 +5,13 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example:
 
 	watchdog@4003C000 {
 		compatible = "nxp,pnx4008-wdt";
 		reg = <0x4003C000 0x1000>;
+		timeout-sec = <10>;
 	};
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index 87722e1..152e9fb 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -142,6 +142,7 @@ static const struct watchdog_ops pnx4008_wdt_ops = {
 static struct watchdog_device pnx4008_wdd = {
 	.info = &pnx4008_wdt_ident,
 	.ops = &pnx4008_wdt_ops,
+	.timeout = DEFAULT_HEARTBEAT,
 	.min_timeout = 1,
 	.max_timeout = MAX_HEARTBEAT,
 };
@@ -151,8 +152,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
 	struct resource *r;
 	int ret = 0;
 
-	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
-		heartbeat = DEFAULT_HEARTBEAT;
+	watchdog_init_timeout(&pnx4008_wdd, heartbeat, pdev->dev.of_node);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	wdt_base = devm_request_and_ioremap(&pdev->dev, r);
@@ -167,7 +167,6 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		goto out;
 
-	pnx4008_wdd.timeout = heartbeat;
 	pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
 			WDIOF_CARDRESET : 0;
 	watchdog_set_nowayout(&pnx4008_wdd, nowayout);
@@ -181,7 +180,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
-			heartbeat);
+		 pnx4008_wdd.timeout);
 
 	return 0;
 
-- 
1.8.0

[PATCH v6 4/7] watchdog: s3c2410_wdt: add timeout-sec property binding

[Fabio Porcedda]

Only compile tested.

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Cc: Kukjin Kim <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 Documentation/devicetree/bindings/watchdog/samsung-wdt.txt | 3 +++
 drivers/watchdog/s3c2410_wdt.c                             | 6 ++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 79ead82..451127a 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -9,3 +9,6 @@ Required properties:
 - reg : base physical address of the controller and length of memory mapped
 	region.
 - interrupts : interrupt number to the cpu.
+
+Optional properties:
+- timeout-sec : contains the watchdog timeout in seconds.
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 9245b4d..ff6ff11 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -53,7 +53,7 @@
 #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)
 
 static bool nowayout	= WATCHDOG_NOWAYOUT;
-static int tmr_margin	= CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
+static int tmr_margin;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
 static int soft_noboot;
 static int debug;
@@ -226,6 +226,7 @@ static struct watchdog_ops s3c2410wdt_ops = {
 static struct watchdog_device s3c2410_wdd = {
 	.info = &s3c2410_wdt_ident,
 	.ops = &s3c2410wdt_ops,
+	.timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
 };
 
 /* interrupt handler code */
@@ -365,7 +366,8 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
 	/* see if we can actually set the requested timer margin, and if
 	 * not, try the default value */
 
-	if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, tmr_margin)) {
+	watchdog_init_timeout(&s3c2410_wdd, tmr_margin,  pdev->dev.of_node);
+	if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, s3c2410_wdd.timeout)) {
 		started = s3c2410wdt_set_heartbeat(&s3c2410_wdd,
 					CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
 
-- 
1.8.0

[PATCH v6 5/7] watchdog: at91sam9_wdt: add timeout-sec property binding

[Fabio Porcedda]

Tested on at91sam9260 board (evk-pro3).

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Andrew Victor <linux-PelNFVqkFnVyf+4FbqDuWQ@public.gmane.org>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/watchdog/atmel-wdt.txt |  4 ++++
 drivers/watchdog/Kconfig                                 |  1 +
 drivers/watchdog/at91sam9_wdt.c                          | 16 +++++++++++++---
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index 2957ebb..fcdd48f 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -7,9 +7,13 @@ Required properties:
 - reg: physical base address of the controller and length of memory mapped
   region.
 
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example:
 
 	watchdog@fffffd40 {
 		compatible = "atmel,at91sam9260-wdt";
 		reg = <0xfffffd40 0x10>;
+		timeout-sec = <10>;
 	};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ad1bb93..dda695f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -114,6 +114,7 @@ config AT91RM9200_WATCHDOG
 config AT91SAM9X_WATCHDOG
 	tristate "AT91SAM9X / AT91CAP9 watchdog"
 	depends on ARCH_AT91 && !ARCH_AT91RM9200
+	select WATCHDOG_CORE
 	help
 	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
 	  reboot your system when the timeout is reached.
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index dc42e44..d864dc4 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -57,8 +57,10 @@
 #define WDT_TIMEOUT	(HZ/2)
 
 /* User land timeout */
+#define MIN_HEARTBEAT 1
+#define MAX_HEARTBEAT 16
 #define WDT_HEARTBEAT 15
-static int heartbeat = WDT_HEARTBEAT;
+static int heartbeat;
 module_param(heartbeat, int, 0);
 MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
 	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
@@ -255,6 +257,12 @@ static struct miscdevice at91wdt_miscdev = {
 	.fops		= &at91wdt_fops,
 };
 
+static struct watchdog_device at91wdt_wdd __initdata = {
+	.timeout = WDT_HEARTBEAT,
+	.min_timeout = MIN_HEARTBEAT,
+	.max_timeout = MAX_HEARTBEAT,
+};
+
 static int __init at91wdt_probe(struct platform_device *pdev)
 {
 	struct resource	*r;
@@ -273,6 +281,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	watchdog_init_timeout(&at91wdt_wdd, heartbeat, pdev->dev.of_node);
+
 	/* Set watchdog */
 	res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000));
 	if (res)
@@ -282,12 +292,12 @@ static int __init at91wdt_probe(struct platform_device *pdev)
 	if (res)
 		return res;
 
-	at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+	at91wdt_private.next_heartbeat = jiffies + at91wdt_wdd.timeout * HZ;
 	setup_timer(&at91wdt_private.timer, at91_ping, 0);
 	mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
 
 	pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
-		heartbeat, nowayout);
+		at91wdt_wdd.timeout, nowayout);
 
 	return 0;
 }
-- 
1.8.0

[PATCH v6 6/7] watchdog: orion_wdt: move the min_timeout initialization

[Fabio Porcedda]

Move the min_timeout initialization inside the orion_wdt definition.

Only compile tested.

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
---
 drivers/watchdog/orion_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 446a3e9..3b4e228 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -140,6 +140,7 @@ static const struct watchdog_ops orion_wdt_ops = {
 static struct watchdog_device orion_wdt = {
 	.info = &orion_wdt_info,
 	.ops = &orion_wdt_ops,
+	.min_timeout = 1,
 };
 
 static int __devinit orion_wdt_probe(struct platform_device *pdev)
@@ -162,7 +163,6 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
 
 	wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
 
-	orion_wdt.min_timeout = 1;
 	orion_wdt.timeout = wdt_max_duration;
 	orion_wdt.max_timeout = wdt_max_duration;
 	watchdog_init_timeout(&orion_wdt, heartbeat, pdev->dev.of_node);
-- 
1.8.0

[PATCH v6 7/7] watchdog: WatchDog Timer Driver Core - fix comment

[Fabio Porcedda]

Signed-off-by: Fabio Porcedda <fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 include/linux/watchdog.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index 5cff9d6..04ef8bd 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -129,7 +129,7 @@ static inline void *watchdog_get_drvdata(struct watchdog_device *wdd)
 	return wdd->driver_data;
 }
 
-/* drivers/watchdog/core/watchdog_core.c */
+/* drivers/watchdog/watchdog_core.c */
 extern void watchdog_init_timeout(struct watchdog_device *wdd,
 				  unsigned int parm_timeout,
 				  struct device_node *node);
-- 
1.8.0

Re: [PATCH v6 0/7] watchdog: dt: add support for the timeout-sec dt property

[Fabio Porcedda]

On Thu, Nov 22, 2012 at 1:51 PM, Fabio Porcedda
<fabio.porcedda-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Hi all,
> this patchset add the timeout-sec property to the watchdog core,
> to the at91sam9_wdt driver and on all framework enabled watchdog driver
> with dt support.
> The at91sam9_wdt is tested on evk-pr3,
> the other drivers are compile tested only.
>
> This patchset depends on the patchset already sent:
> "[PATCH v9 0/3 RESEND] watchdog: at91sam9_wdt: add device tree support"
> that is already pulled in arm-soc/for-next branch.

Ping.

The dependency is already merged.

> Best regards
> Fabio Porcedda
>
> changes:
> v6:
>   - remove patch for function of_get_timeout_sec as aked by Rob Herring
>   - add Acked-by: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
>   - add Acked-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
> v5:
>   - fix codestyle for compilance ti checkpatch.pl about
>     "ERROR: do not initialise statics to 0 or NULL"
>     for s3c2410_wdt.c:56 and at91sam9_wdt.c:63
> v4:
>   - add of_get_timeout_sec
>   - add s3c2410_wdt driver
>   - split driver patch
>   - fixed watchdog_init_timeout handling of min_timeout and max_timeout
> v3:
>   - rename watchdog_probe_dt_timeout ->  watchdog_init_timeout
>   - move the watchdog_init_timeout function from inline to watchdog_core.c
>   - add timeout parameter handling code to watchdog_init_timeout
>   - add timeout-sec property to the pnx4008-wdt driver
>   - add two small commit for fixup and cleanup
> v2:
>   - change "timeout" to "timeout-sec" as asked by Jean-Christophe
>   - at91sam9_wdt: use the new helper function
>   - at91sam9_wdt: add bounds checking
>   - watchdog.h: add bounds checking
>
> Fabio Porcedda (7):
>   watchdog: core: dt: add support for the timeout-sec dt property
>   watchdog: orion_wdt: add timeout-sec property binding
>   watchdog: pnx4008: add timeout-sec property binding
>   watchdog: s3c2410_wdt: add timeout-sec property binding
>   watchdog: at91sam9_wdt: add timeout-sec property binding
>   watchdog: orion_wdt: move the min_timeout initialization
>   watchdog: WatchDog Timer Driver Core - fix comment
>
>  .../devicetree/bindings/watchdog/atmel-wdt.txt     |  4 +++
>  .../devicetree/bindings/watchdog/marvel.txt        |  5 +++
>  .../devicetree/bindings/watchdog/pnx4008-wdt.txt   |  4 +++
>  .../devicetree/bindings/watchdog/samsung-wdt.txt   |  3 ++
>  Documentation/watchdog/watchdog-kernel-api.txt     | 10 ++++++
>  drivers/watchdog/Kconfig                           |  1 +
>  drivers/watchdog/at91sam9_wdt.c                    | 16 ++++++++--
>  drivers/watchdog/orion_wdt.c                       | 10 +++---
>  drivers/watchdog/pnx4008_wdt.c                     |  7 ++--
>  drivers/watchdog/s3c2410_wdt.c                     |  6 ++--
>  drivers/watchdog/watchdog_core.c                   | 37 ++++++++++++++++++++++
>  include/linux/watchdog.h                           |  5 ++-
>  12 files changed, 92 insertions(+), 16 deletions(-)
>
> --
> 1.8.0
>

--
Fabio Porcedda

Re: [PATCH v6 0/7] watchdog: dt: add support for the timeout-sec dt property

[Wim Van Sebroeck]

Hi Fabio,

> > Hi all,
> > this patchset add the timeout-sec property to the watchdog core,
> > to the at91sam9_wdt driver and on all framework enabled watchdog driver
> > with dt support.
> > The at91sam9_wdt is tested on evk-pr3,
> > the other drivers are compile tested only.
> >
> > This patchset depends on the patchset already sent:
> > "[PATCH v9 0/3 RESEND] watchdog: at91sam9_wdt: add device tree support"
> > that is already pulled in arm-soc/for-next branch.
> 
> Ping.
> 
> The dependency is already merged.

Will not be for this merge window. Will review next week.

Kind regards,
Wim.