From: Qing Xu <qingx-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
To: qingx-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
cxie4-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH v4 7/7] mfd: max8925: add dts
Date: Thu, 29 Nov 2012 11:35:20 +0800 [thread overview]
Message-ID: <1354160120-1923-1-git-send-email-qingx@marvell.com> (raw)
From: Qing Xu <qingx-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
add max8925 dts support into mmp2 brownstone platform
Signed-off-by: Qing Xu <qingx-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/mmp2-brownstone.dts | 158 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mmp2.dtsi | 4 +-
2 files changed, 161 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts
index c9b4f27..f03d4f4 100644
--- a/arch/arm/boot/dts/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/mmp2-brownstone.dts
@@ -29,6 +29,164 @@
};
twsi1: i2c@d4011000 {
status = "okay";
+ pmic: max8925@3c {
+ compatible = "maxim,max8925";
+ reg = <0x3c>;
+ interrupts = <1>;
+ interrupt-parent = <&intcmux4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ tsc-irq = <0>;
+
+ regulators {
+ SDV1 {
+ regulator-min-microvolt = <637500>;
+ regulator-max-microvolt = <1425000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ SDV2 {
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2225000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ SDV3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO2 {
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO3 {
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO4 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO5 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO6 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO7 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO8 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO9 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO10 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ };
+ LDO11 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO12 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO13 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO14 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO15 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO16 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO17 {
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO18 {
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <2250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO19 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO20 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ backlight {
+ max8925-dual-string = <0>;
+ };
+ charger {
+ batt-detect = <0>;
+ topoff-threshold = <1>;
+ fast-charge = <7>;
+ no-temp-support = <0>;
+ no-insert-detect = <0>;
+ };
+ };
};
rtc: rtc@d4010000 {
status = "okay";
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 80f74e2..76f9cc7 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -41,7 +41,7 @@
mrvl,intc-nr-irqs = <64>;
};
- intcmux4@d4282150 {
+ intcmux4: interrupt-controller@d4282150 {
compatible = "mrvl,mmp2-mux-intc";
interrupts = <4>;
interrupt-controller;
@@ -196,6 +196,8 @@
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
+ #address-cells = <1>;
+ #size-cells = <0>;
mrvl,i2c-fast-mode;
status = "disabled";
};
--
1.7.0.4
next reply other threads:[~2012-11-29 3:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-29 3:35 Qing Xu [this message]
2012-12-04 7:09 ` [PATCH v4 7/7] mfd: max8925: add dts Haojian Zhuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354160120-1923-1-git-send-email-qingx@marvell.com \
--to=qingx-eyqppykdwxrbdgjk7y7tuq@public.gmane.org \
--cc=cxie4-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=haojian.zhuang-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).