[PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices

[PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices

[Javier Martinez Canillas]

IGEP technology devices are TI OMAP3 SoC based industrial embedded
and computer-on-module boards. This patch-set adds initial device
tree support for these devices.

The device trees allows to boot from an MMC and are working all the
components that already have device tree support on OMAP3 SoCs:

- MMC/SD
- UARTs
- GPIO LEDs
- TWL4030 codec audio
- pinmux/pinconf pinctrl

Some peripheral are still not working such as Flash storage and
Ethernet but support for these will also be included once the
OMAP GPMC device tree binding patches land on mainline.

This is a v3 of the patch-set that solves issues pointed out by
Enric Balletbo and Benoit Cousson.

The patch-set is composed of the following patches:

[PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
[PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board
[PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module

Best regards,
Javier

[PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices

[Javier Martinez Canillas]

Add a generic .dtsi device tree source file for the
common characteristics across IGEP Technology devices.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
---

Changes since v2:
    - Associate uart3_pins in uart3 device node.
    - Remove mcbsp2_ins for now until SMSC9221 Ethernet support is added.

 arch/arm/boot/dts/omap3-igep.dtsi |   87 +++++++++++++++++++++++++++++++++++++
 1 files changed, 87 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-igep.dtsi

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
new file mode 100644
index 0000000..125fe00
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Device Tree Source for IGEP Technology devices
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "igep2";
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+};
+
+&omap3_pmx_core {
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e 0x100	/* uart3_rx.uart3_rx INPUT | MODE0 */
+			0x170 0		/* uart3_tx.uart3_tx OUTPUT | MODE0 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		vsim: regulator@10 {
+			compatible = "ti,twl4030-vsim";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			      };
+		};
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
-- 
1.7.7.6

[PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board

[Javier Martinez Canillas]

ISEE IGEPv2 is an TI OMAP3 SoC based embedded board.

This patch adds an initial device tree support to boot
an IGEPv2 from the MMC/SD.

Currently is working everything that is supported by DT
on OMAP3 SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio).

Signed-off-by: Javier Martinez Canillas <javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Acked-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Tested-by: Enric Balletbo i Serra <eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---

Changes since v1:
    - Use default-state = "on" instead default-trigger = "default-on" for LED

 arch/arm/boot/dts/Makefile           |    1 +
 arch/arm/boot/dts/omap3-igep0020.dts |   56 ++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-igep0020.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9f..1dc0f39 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
+	omap3-igep0020.dtb \
 	omap4-panda.dtb \
 	omap4-pandaES.dtb \
 	omap4-var_som.dtb \
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
new file mode 100644
index 0000000..e2b9849
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -0,0 +1,56 @@
+/*
+ * Device Tree Source for IGEPv2 board
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "omap3-igep.dtsi"
+
+/ {
+	model = "IGEPv2";
+	compatible = "isee,omap3-igep0020", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		boot {
+			 label = "omap3:green:boot";
+			 gpios = <&gpio1 26 0>;
+			 default-state = "on";
+		};
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&gpio1 27 0>;
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 28 0>;
+			 default-state = "off";
+		};
+
+		user2 {
+			label = "omap3:green:user1";
+			gpios = <&twl_gpio 19 1>;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
-- 
1.7.7.6

[PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module

[Javier Martinez Canillas]

ISEE IGEP COM Module is an TI OMAP3 SoC computer on module.

This patch adds an initial device tree support to boot an
IGEP COM Module from the MMC/SD.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
---

Changes since v1:
    - Use default-state = "on" instead default-trigger = "default-on" for LED
    - Update GPIO mapping according to latest IGEP COM Module rev.E instead D

 arch/arm/boot/dts/Makefile           |    1 +
 arch/arm/boot/dts/omap3-igep0030.dts |   44 ++++++++++++++++++++++++++++++++++
 2 files changed, 45 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/omap3-igep0030.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1dc0f39..78c99bc 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -67,6 +67,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap3-igep0020.dtb \
+	omap3-igep0030.dtb \
 	omap4-panda.dtb \
 	omap4-pandaES.dtb \
 	omap4-var_som.dtb \
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
new file mode 100644
index 0000000..9dc48d2
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for IGEP COM Module
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "omap3-igep.dtsi"
+
+/ {
+	model = "IGEP COM Module";
+	compatible = "isee,omap3-igep0030", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		boot {
+			 label = "omap3:green:boot";
+			 gpios = <&twl_gpio 13 1>;
+			 default-state = "on";
+		};
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&twl_gpio 18 1>; /* LEDA */
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:green:user1";
+			 gpios = <&twl_gpio 19 1>; /* LEDB */
+			 default-state = "off";
+		};
+
+		user2 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 16 1>;
+			 default-state = "off";
+		};
+	};
+};
-- 
1.7.7.6

Re: [PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices

[Javier Martinez Canillas]

On Mon, Dec 3, 2012 at 1:41 PM, Javier Martinez Canillas
<javier.martinez@collabora.co.uk> wrote:
> IGEP technology devices are TI OMAP3 SoC based industrial embedded
> and computer-on-module boards. This patch-set adds initial device
> tree support for these devices.
>
> The device trees allows to boot from an MMC and are working all the
> components that already have device tree support on OMAP3 SoCs:
>
> - MMC/SD
> - UARTs
> - GPIO LEDs
> - TWL4030 codec audio
> - pinmux/pinconf pinctrl
>
> Some peripheral are still not working such as Flash storage and
> Ethernet but support for these will also be included once the
> OMAP GPMC device tree binding patches land on mainline.
>
> This is a v3 of the patch-set that solves issues pointed out by
> Enric Balletbo and Benoit Cousson.
>
> The patch-set is composed of the following patches:
>
> [PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
> [PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board
> [PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module
>
> Best regards,
> Javier
> --

Hi Benoit and Tony,

Any comments on these?

Best regards,
Javier

Re: [PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices

[Benoit Cousson]

Hi Javier,

On 12/12/2012 09:25 AM, Javier Martinez Canillas wrote:
> On Mon, Dec 3, 2012 at 1:41 PM, Javier Martinez Canillas
> <javier.martinez@collabora.co.uk> wrote:
>> IGEP technology devices are TI OMAP3 SoC based industrial embedded
>> and computer-on-module boards. This patch-set adds initial device
>> tree support for these devices.
>>
>> The device trees allows to boot from an MMC and are working all the
>> components that already have device tree support on OMAP3 SoCs:
>>
>> - MMC/SD
>> - UARTs
>> - GPIO LEDs
>> - TWL4030 codec audio
>> - pinmux/pinconf pinctrl
>>
>> Some peripheral are still not working such as Flash storage and
>> Ethernet but support for these will also be included once the
>> OMAP GPMC device tree binding patches land on mainline.
>>
>> This is a v3 of the patch-set that solves issues pointed out by
>> Enric Balletbo and Benoit Cousson.
>>
>> The patch-set is composed of the following patches:
>>
>> [PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
>> [PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board
>> [PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module
>>
>> Best regards,
>> Javier
>> --
> 
> Hi Benoit and Tony,
> 
> Any comments on these?

Nope, that's fine. I'll applied the series for 3.9.

Thanks,
Benoit

Re: [PATCH v3 0/3] ARM/dts: omap3: Add DT support for IGEP devices

[Javier Martinez Canillas]

On Wed, Dec 12, 2012 at 11:11 AM, Benoit Cousson <b-cousson@ti.com> wrote:
> Hi Javier,
>
> On 12/12/2012 09:25 AM, Javier Martinez Canillas wrote:
>> On Mon, Dec 3, 2012 at 1:41 PM, Javier Martinez Canillas
>> <javier.martinez@collabora.co.uk> wrote:
>>> IGEP technology devices are TI OMAP3 SoC based industrial embedded
>>> and computer-on-module boards. This patch-set adds initial device
>>> tree support for these devices.
>>>
>>> The device trees allows to boot from an MMC and are working all the
>>> components that already have device tree support on OMAP3 SoCs:
>>>
>>> - MMC/SD
>>> - UARTs
>>> - GPIO LEDs
>>> - TWL4030 codec audio
>>> - pinmux/pinconf pinctrl
>>>
>>> Some peripheral are still not working such as Flash storage and
>>> Ethernet but support for these will also be included once the
>>> OMAP GPMC device tree binding patches land on mainline.
>>>
>>> This is a v3 of the patch-set that solves issues pointed out by
>>> Enric Balletbo and Benoit Cousson.
>>>
>>> The patch-set is composed of the following patches:
>>>
>>> [PATCH v3 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
>>> [PATCH v3 2/3] ARM/dts: omap3: Add support for IGEPv2 board
>>> [PATCH v3 3/3] ARM/dts: omap3: Add support for IGEP COM Module
>>>
>>> Best regards,
>>> Javier
>>> --
>>
>> Hi Benoit and Tony,
>>
>> Any comments on these?
>
> Nope, that's fine. I'll applied the series for 3.9.
>
> Thanks,
> Benoit
>
>

Great, thanks a lot for!

Best regards,
Javier