From mboxrd@z Thu Jan  1 00:00:00 1970
From: Philipp Zabel <p.zabel@pengutronix.de>
Subject: Re: [PATCH v7 0/4] Add generic driver for on-chip SRAM
Date: Tue, 04 Dec 2012 17:55:29 +0100
Message-ID: <1354640129.3410.343.camel@pizza.hi.pengutronix.de>
References: <1353680655-21624-1-git-send-email-p.zabel@pengutronix.de>
	 <1354611218.3410.11.camel@pizza.hi.pengutronix.de>
	 <20121204161918.GC17860@kroah.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20121204161918.GC17860@kroah.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>, Grant Likely <grant.likely@secretlab.ca>, Rob Herring <rob.herring@calxeda.com>, Paul Gortmaker <paul.gortmaker@windriver.com>, Shawn Guo <shawn.guo@linaro.org>, Richard Zhao <richard.zhao@freescale.com>, Huang Shijie <shijie8@gmail.com>, Dong Aisheng <dong.aisheng@linaro.org>, Matt Porter <mporter@ti.com>, Fabio Estevam <fabio.estevam@freescale.com>, Javier Martin <javier.martin@vista-silicon.com>, kernel@pengutronix.de, devicetree-discuss@lists.ozlabs.org
List-Id: devicetree@vger.kernel.org

On Tue, 2012-12-04 at 08:19 -0800, Greg Kroah-Hartman wrote:
> On Tue, Dec 04, 2012 at 09:53:38AM +0100, Philipp Zabel wrote:
> > Hi,
> > 
> > On Fri, 2012-11-23 at 15:24 +0100, Philipp Zabel wrote:
> > > These patches add support to configure on-chip SRAM via device-tree
> > > node or platform data and to obtain the resulting genalloc pool from
> > > the physical address or a phandle pointing at the device tree node.
> > > This allows drivers to allocate SRAM with the genalloc API without
> > > hard-coding the genalloc pool pointer.
> > 
> > are there any further comments on this series?
> > 
> > > The on-chip SRAM on i.MX53 and i.MX6q can be registered via device tree
> > > and changed to use the simple generic SRAM driver:
> > > 
> > >                 ocram: ocram@00900000 {
> > >                         compatible = "fsl,imx-ocram", "sram";
> > >                         reg = <0x00900000 0x3f000>;
> > >                 };
> > > 
> > > A driver that needs to allocate SRAM buffers, like the video processing
> > > unit on i.MX53, can retrieve the genalloc pool from a phandle in the
> > > device tree using of_get_named_gen_pool(node, "iram", 0) from patch 1:
> > > 
> > >                 vpu@63ff4000 {
> > >                         /* ... */
> > >                         iram = <&ocram>;
> > >                 };
> > > 
> > > The allocation granularity is hard-coded to 32 bytes for now,
> > > until a way to configure it can be agreed upon. There is overhead
> > > for bigger SRAMs, where only a much coarser allocation granularity
> > > is needed: At 32 bytes minimum allocation size, a 256 KiB SRAM
> > > needs a 1 KiB bitmap to track allocations.
> > > 
> > > Once everybody is ok with it, could the first two patches be merged
> > > through the char-misc tree? I'll resend the i.MX and coda patches to
> > > the respective lists afterwards.
> > 
> > Arnd, Greg, would you take the first patch "genalloc: add a global pool
> > list, allow to find pools by phys address" into the char-misc tree if
> > there are no vetoes? Or should I try and get it merged separately,
> > first?
> 
> It's too late for anything new for 3.8, so how about resending this all
> after 3.8-rc1 is out and we can take it from there?

Ok, I'll do that.

thanks
Philipp