From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
device-tree <devicetree-discuss@lists.ozlabs.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH V2 2/2] ARM: dts: OMAP2+: Add PMU nodes
Date: Mon, 17 Dec 2012 11:49:08 -0600 [thread overview]
Message-ID: <1355766548-5702-3-git-send-email-jon-hunter@ti.com> (raw)
In-Reply-To: <1355766548-5702-1-git-send-email-jon-hunter@ti.com>
Add PMU nodes for OMAP2, OMAP3 and OMAP4460 devices.
Please note that the node for OMAP4460 has been placed in a separate
header file for OMAP4460, because the node is not compatible with
OMAP4430. The node for OMAP4430 is not included because PMU is not
currently supported on OMAP4430 due to the absence of a cross-trigger
interface driver.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap2.dtsi | 5 +++++
arch/arm/boot/dts/omap3.dtsi | 6 ++++++
arch/arm/boot/dts/omap4-panda-es.dts | 2 ++
arch/arm/boot/dts/omap4460.dtsi | 18 ++++++++++++++++++
4 files changed, 31 insertions(+)
create mode 100644 arch/arm/boot/dts/omap4460.dtsi
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 761c4b6..27f5ea1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -26,6 +26,11 @@
};
};
+ pmu {
+ compatible = "arm,arm1136-pmu";
+ interrupts = <3>;
+ };
+
soc {
compatible = "ti,omap-infra";
mpu {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..6c63118 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -26,6 +26,12 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a8-pmu";
+ interrupts = <3>;
+ ti,hwmods = "debugss";
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 73bc1a6..2a6e344 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -5,7 +5,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
/include/ "omap4-panda.dts"
+/include/ "omap4460.dtsi"
/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
&sound {
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
new file mode 100644
index 0000000..0a1d38b
--- /dev/null
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 54 0x4>,
+ <0 55 0x4>;
+ ti,hwmods = "debugss";
+ };
+};
--
1.7.10.4
next prev parent reply other threads:[~2012-12-17 17:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-17 17:49 [PATCH V2 0/2] ARM: dts: Add PMU support for OMAP2+ Jon Hunter
2012-12-17 17:49 ` [PATCH V2 1/2] ARM: OMAP2+: Prepare for device-tree PMU support Jon Hunter
2013-01-11 17:59 ` Tony Lindgren
2012-12-17 17:49 ` Jon Hunter [this message]
2013-01-11 13:23 ` [PATCH V2 2/2] ARM: dts: OMAP2+: Add PMU nodes Benoit Cousson
2013-01-11 13:59 ` Jon Hunter
2013-01-11 17:59 ` Tony Lindgren
[not found] ` <1355766548-5702-1-git-send-email-jon-hunter-l0cyMroinI0@public.gmane.org>
2012-12-17 17:52 ` [PATCH V2 0/2] ARM: dts: Add PMU support for OMAP2+ Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1355766548-5702-3-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).