devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
	sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org
Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	Laxman Dewangan
	<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	lrg-l0cyMroinI0@public.gmane.org
Subject: [PATCH 2/4] regulator: tps65090: add DT support
Date: Fri, 28 Dec 2012 14:59:39 +0530	[thread overview]
Message-ID: <1356686981-4152-3-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1356686981-4152-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

Add DT support for TI PMIC tps65090 regulator driver. The DT of this
device have node regulator and all regulator's node of this device is
added under this node.

The device tree binding document has the required information for
adding this device on DTS file.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/regulator/tps65090-regulator.c |   96 +++++++++++++++++++++++++++++++-
 1 files changed, 93 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 41c3917..bc45e98 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -19,11 +19,13 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/mfd/tps65090.h>
 
 struct tps65090_regulator {
@@ -138,6 +140,85 @@ static void tps65090_configure_regulator_config(
 	}
 }
 
+#ifdef CONFIG_OF
+static struct of_regulator_match tps65090_matches[] = {
+	{ .name = "dcdc1", },
+	{ .name = "dcdc2", },
+	{ .name = "dcdc3", },
+	{ .name = "fet1",  },
+	{ .name = "fet2",  },
+	{ .name = "fet3",  },
+	{ .name = "fet4",  },
+	{ .name = "fet5",  },
+	{ .name = "fet6",  },
+	{ .name = "fet7",  },
+	{ .name = "ldo1",  },
+	{ .name = "ldo2",  },
+};
+
+static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+		struct platform_device *pdev,
+		struct of_regulator_match **tps65090_reg_matches)
+{
+	struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
+	struct tps65090_platform_data *tps65090_pdata = tps65090_mfd->pdata;
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct device_node *regulators;
+	int idx = 0, ret;
+	struct tps65090_regulator_plat_data *reg_pdata;
+
+	reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX *
+				sizeof(*reg_pdata), GFP_KERNEL);
+	if (!reg_pdata) {
+		dev_err(&pdev->dev, "Memory alloc for reg_pdata failed\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	regulators = of_find_node_by_name(np, "regulators");
+	if (!regulators) {
+		dev_err(&pdev->dev, "regulator node not found\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	ret = of_regulator_match(pdev->dev.parent, regulators, tps65090_matches,
+			ARRAY_SIZE(tps65090_matches));
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Error parsing regulator init data: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	*tps65090_reg_matches = tps65090_matches;
+	for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
+		struct regulator_init_data *ri_data;
+		struct tps65090_regulator_plat_data *rpdata;
+
+		rpdata = &reg_pdata[idx];
+		ri_data = tps65090_matches[idx].init_data;
+		if (!ri_data || !tps65090_matches[idx].of_node)
+			continue;
+
+		rpdata->reg_init_data = ri_data;
+		rpdata->enable_ext_control = of_property_read_bool(
+					tps65090_matches[idx].of_node,
+					"ti,enable-ext-control");
+		if (rpdata->enable_ext_control)
+			rpdata->gpio = of_get_named_gpio(np, "gpio", 0);
+
+		tps65090_pdata->reg_pdata[idx] = rpdata;
+	}
+	return tps65090_pdata;
+}
+#else
+static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
+			struct platform_device *pdev,
+			struct of_regulator_match **tps65090_reg_matches)
+{
+	*tps65090_reg_matches = NULL;
+	return NULL;
+}
+#endif
+
 static int tps65090_regulator_probe(struct platform_device *pdev)
 {
 	struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
@@ -147,15 +228,20 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
 	struct tps65090_regulator_plat_data *tps_pdata;
 	struct tps65090_regulator *pmic;
 	struct tps65090_platform_data *tps65090_pdata;
+	struct of_regulator_match *tps65090_reg_matches = NULL;
 	int num;
 	int ret;
 
 	dev_dbg(&pdev->dev, "Probing regulator\n");
 
 	tps65090_pdata = dev_get_platdata(pdev->dev.parent);
-	if (!tps65090_pdata) {
+	if (!tps65090_pdata && tps65090_mfd->pdata &&
+			tps65090_mfd->dev->of_node)
+		tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
+					&tps65090_reg_matches);
+	if (IS_ERR_OR_NULL(tps65090_pdata)) {
 		dev_err(&pdev->dev, "Platform data missing\n");
-		return -EINVAL;
+		return (tps65090_pdata) ? PTR_ERR(tps65090_pdata) : -EINVAL;
 	}
 
 	pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic),
@@ -192,13 +278,17 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
 			}
 		}
 
-		config.dev = &pdev->dev;
+		config.dev = pdev->dev.parent;
 		config.driver_data = ri;
 		config.regmap = tps65090_mfd->rmap;
 		if (tps_pdata)
 			config.init_data = tps_pdata->reg_init_data;
 		else
 			config.init_data = NULL;
+		if (tps65090_reg_matches)
+			config.of_node = tps65090_reg_matches[num].of_node;
+		else
+			config.of_node = NULL;
 
 		rdev = regulator_register(ri->desc, &config);
 		if (IS_ERR(rdev)) {
-- 
1.7.1.1

  parent reply	other threads:[~2012-12-28  9:29 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-28  9:29 [PATCH 0/4] mfd/regulator: tps65090: add DT support and suspend/resume cleanups Laxman Dewangan
2012-12-28  9:29 ` [PATCH 1/4] mfd: tps65090: add DT support for tps65090 Laxman Dewangan
     [not found] ` <1356686981-4152-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2012-12-28  9:29   ` Laxman Dewangan [this message]
2013-01-14 13:32     ` [PATCH 2/4] regulator: tps65090: add DT support Mark Brown
2012-12-28  9:29   ` [PATCH 3/4] mfd: tps65090: Pass irq domain when adding mfd sub devices Laxman Dewangan
2012-12-28  9:29   ` [PATCH 4/4] mfd: tps65090: remove suspend/resume callbacks Laxman Dewangan
2013-01-14 13:42     ` Mark Brown
2013-01-08 12:25   ` [PATCH 0/4] mfd/regulator: tps65090: add DT support and suspend/resume cleanups Laxman Dewangan
2013-01-13 23:29     ` Mark Brown
2013-02-03 17:01   ` Samuel Ortiz
     [not found] ` <20130203141931.GA8476@sortiz-mobl>
2013-02-03 22:33   ` Samuel Ortiz
2013-02-04  3:40     ` Laxman Dewangan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1356686981-4152-3-git-send-email-ldewangan@nvidia.com \
    --to=ldewangan-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lrg-l0cyMroinI0@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).