devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org,
	b-cousson-l0cyMroinI0@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org,
	linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
	arnd-r2nGTMty4D4@public.gmane.org,
	balbi-l0cyMroinI0@public.gmane.org,
	tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
Subject: [RFC PATCH 5/7] ARM: dts: omap: Add usb_otg and glue data
Date: Tue, 15 Jan 2013 14:12:56 +0530	[thread overview]
Message-ID: <1358239378-10030-6-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1358239378-10030-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>

Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
The dt data specifies among others the interface type (ULPI or UTMI), mode
which is mostly OTG, power that specifies the amount of power this can supply
when in host mode.

Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap3-beagle-xm.dts |    6 ++++++
 arch/arm/boot/dts/omap3-evm.dts       |    6 ++++++
 arch/arm/boot/dts/omap3-overo.dtsi    |    6 ++++++
 arch/arm/boot/dts/omap3.dtsi          |   11 +++++++++++
 arch/arm/boot/dts/omap4-panda.dts     |    6 ++++++
 arch/arm/boot/dts/omap4-sdp.dts       |    6 ++++++
 arch/arm/boot/dts/omap4.dtsi          |   12 ++++++++++++
 7 files changed, 53 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 3705a81..cb07583 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -107,3 +107,9 @@
 	 */
 	ti,pulldowns = <0x03a1c4>;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e8ba1c2..afb9ba9 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -59,3 +59,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 89808ce..4b3d157 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -55,3 +55,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface_type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..8d03736 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,16 @@
 			ti,timer-alwon;
 			ti,timer-secure;
 		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			multipoint = <1>;
+			num_eps = <16>;
+			ram_bits = <12>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 4122efe..612c9bb 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -206,3 +206,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface_type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 43e5258..582d7ee 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -428,3 +428,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface_type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 739bb79..7bbf1fb 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -529,5 +529,17 @@
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
+
+		usb_otg_hs: usb_otg_hs@4a0ab000 {
+			compatible = "ti,omap4-musb";
+			reg = <0x4a0ab000 0x7ff>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			multipoint = <1>;
+			num_eps = <16>;
+			ram_bits = <12>;
+			ti,has_mailbox;
+		};
 	};
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2013-01-15  8:42 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-15  8:42 [RFC PATCH 0/7] usb: musb: add driver for control module Kishon Vijay Abraham I
2013-01-15  8:42 ` [RFC PATCH 1/7] drivers: usb: phy: add a new driver for usb part of " Kishon Vijay Abraham I
     [not found]   ` <1358239378-10030-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-01-15 13:36     ` Arnd Bergmann
2013-01-15 14:24       ` kishon
2013-01-15 14:46         ` Arnd Bergmann
2013-01-15  8:42 ` [RFC PATCH 2/7] ARM: OMAP: devices: create device " Kishon Vijay Abraham I
2013-01-15 12:53   ` Sergei Shtylyov
2013-01-15 14:26     ` kishon
2013-01-17 16:43       ` Sergei Shtylyov
     [not found] ` <1358239378-10030-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-01-15  8:42   ` [RFC PATCH 3/7] ARM: OMAP2: MUSB: Specify omap4 has mailbox Kishon Vijay Abraham I
2013-01-15  8:42   ` Kishon Vijay Abraham I [this message]
2013-01-15  8:42   ` [RFC PATCH 7/7] ARM: dts: omap: Add omap control usb data Kishon Vijay Abraham I
2013-01-15  8:42 ` [RFC PATCH 4/7] drivers: usb: start using the control module driver Kishon Vijay Abraham I
2013-01-15  8:42 ` [RFC PATCH 6/7] ARM: dts: omap: Add omap-usb2 dt data Kishon Vijay Abraham I
2013-01-15 13:41 ` [RFC PATCH 0/7] usb: musb: add driver for control module Arnd Bergmann
     [not found]   ` <201301151341.08297.arnd-r2nGTMty4D4@public.gmane.org>
2013-01-15 14:39     ` kishon
2013-01-15 15:04       ` Felipe Balbi
2013-01-15 16:06         ` B, Ravi
2013-01-16  6:01           ` kishon
2013-01-16  7:13             ` Felipe Balbi
2013-01-18 11:47 ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358239378-10030-6-git-send-email-kishon@ti.com \
    --to=kishon-l0cymroini0@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=b-cousson-l0cyMroinI0@public.gmane.org \
    --cc=balbi-l0cyMroinI0@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).