From: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org
Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
Laxman Dewangan
<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH V2 4/4] mfd: tps65090: remove suspend/resume callbacks
Date: Tue, 29 Jan 2013 14:35:18 +0530 [thread overview]
Message-ID: <1359450318-24912-5-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1359450318-24912-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
The tps65090 mfd driver implement the suspend/resume callbacks
which just disable and enable irqs in suspend/resume respectively.
This operation is already done in irq suspend and irq_resume and
hence it is not require to implement the same in the driver.
Remove this non-require code.
Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
Changes from V1:
- No change.
drivers/mfd/tps65090.c | 23 -----------------------
1 files changed, 0 insertions(+), 23 deletions(-)
diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c
index 2ad0a15..98edb5b 100644
--- a/drivers/mfd/tps65090.c
+++ b/drivers/mfd/tps65090.c
@@ -230,28 +230,6 @@ static int tps65090_i2c_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int tps65090_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- if (client->irq)
- disable_irq(client->irq);
- return 0;
-}
-
-static int tps65090_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- if (client->irq)
- enable_irq(client->irq);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops tps65090_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(tps65090_suspend, tps65090_resume)
-};
-
static const struct i2c_device_id tps65090_id_table[] = {
{ "tps65090", 0 },
{ },
@@ -263,7 +241,6 @@ static struct i2c_driver tps65090_driver = {
.name = "tps65090",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(tps65090_of_match),
- .pm = &tps65090_pm_ops,
},
.probe = tps65090_i2c_probe,
.remove = tps65090_i2c_remove,
--
1.7.1.1
prev parent reply other threads:[~2013-01-29 9:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 9:05 [PATCH V2 0/4] mfd/regulator: tps65090: add DT support and suspend/resume cleanups Laxman Dewangan
2013-01-29 9:05 ` [PATCH V2 2/4] regulator: tps65090: add DT support Laxman Dewangan
2013-01-29 11:09 ` Mark Brown
2013-01-29 9:05 ` [PATCH V2 3/4] mfd: tps65090: Pass irq domain when adding mfd sub devices Laxman Dewangan
[not found] ` <1359450318-24912-1-git-send-email-ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-01-29 9:05 ` [PATCH V2 1/4] mfd: tps65090: add DT support for tps65090 Laxman Dewangan
2013-01-29 9:05 ` Laxman Dewangan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359450318-24912-5-git-send-email-ldewangan@nvidia.com \
--to=ldewangan-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).