From: Jon Hunter <jon-hunter@ti.com>
To: Rob Herring <rob.herring@calxeda.com>,
Grant Likely <grant.likely@secretlab.ca>,
Tony Lindgren <tony@atomide.com>,
Benoit Cousson <b-cousson@ti.com>,
Vinod Koul <vinod.koul@intel.com>,
Russell King <linux@arm.linux.org.uk>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Matt Porter <mporter@ti.com>, Felipe Balbi <balbi@ti.com>,
Sourav Poddar <sourav.poddar@ti.com>,
Balaji T K <balajitk@ti.com>, Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 0/2] ARM: dts: Add DT bindings for OMAP SDMA
Date: Wed, 6 Feb 2013 15:03:14 -0600 [thread overview]
Message-ID: <1360184596-1603-1-git-send-email-jon-hunter@ti.com> (raw)
Adds device-tree bindings from SDMA on OMAP2+ devices. DMA client
bindings are also added for devices that have SPI and MMC bindings
populated. Client binding data is based upon existing HWMOD data for
OMAP and has been checked against OMAP documentation.
Testing includes ...
1. Boot tested on OMAP3430 Beagle board, OMAP4430 Panda board and
OMAP4460 Panda board with and without device-tree present.
2. Testing of MMC1 with SD card on OMAP3430 Beagle board, OMAP4430
Panda board and OMAP4460 Panda board with and without device-tree
present.
Testing branch available here [1].
Series is based upon v3.8-rc6 on top of the following ...
- Vinod's topic/dmaengine_dt branch [2]
- Matt Porter's series "DMA Engine support for AM33XX" [3]
- Matt Porter's series "omap_hsmmc DT DMA Client support" [4]
- Sourav Poddar's series "add omap mcspi device tree data" [5]
[1] https://github.com/jonhunter/linux/commits/dev-dt-dma
[2] http://git.infradead.org/users/vkoul/slave-dma.git/shortlog/refs/heads/topic/dmaengine_dt
[3] http://permalink.gmane.org/gmane.linux.kernel.spi.devel/12508
[4] http://permalink.gmane.org/gmane.linux.ports.arm.omap/93165
[5] http://permalink.gmane.org/gmane.linux.kernel/1435002
Jon Hunter (2):
ARM: dts: OMAP2+: Add SDMA controller bindings and nodes
dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver
.../devicetree/bindings/dma/omap-sdma.txt | 44 ++++++++++++++++++++
arch/arm/boot/dts/omap2.dtsi | 12 ++++++
arch/arm/boot/dts/omap3.dtsi | 40 ++++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 41 ++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 41 ++++++++++++++++++
drivers/dma/omap-dma.c | 31 +++++++++++++-
6 files changed, 208 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/dma/omap-sdma.txt
--
1.7.10.4
next reply other threads:[~2013-02-06 21:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 21:03 Jon Hunter [this message]
2013-02-06 21:03 ` [PATCH 1/2] ARM: dts: OMAP2+: Add SDMA controller bindings and nodes Jon Hunter
[not found] ` <1360184596-1603-2-git-send-email-jon-hunter-l0cyMroinI0@public.gmane.org>
2013-02-07 14:39 ` Arnd Bergmann
2013-02-06 21:03 ` [PATCH 2/2] dmaengine: OMAP: Register SDMA controller with Device Tree DMA driver Jon Hunter
2013-02-06 21:14 ` Jon Hunter
[not found] ` <1360184596-1603-3-git-send-email-jon-hunter-l0cyMroinI0@public.gmane.org>
2013-02-07 14:39 ` Arnd Bergmann
2013-02-07 15:51 ` Jon Hunter
2013-02-07 16:07 ` Arnd Bergmann
2013-02-08 0:52 ` Jon Hunter
2013-02-08 1:44 ` Tony Lindgren
[not found] ` <20130208014402.GA7556-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2013-02-08 18:52 ` Jon Hunter
2013-02-08 15:23 ` Jon Hunter
2013-02-09 10:52 ` Russell King - ARM Linux
2013-02-07 8:39 ` [PATCH 0/2] ARM: dts: Add DT bindings for OMAP SDMA Felipe Balbi
2013-02-07 13:18 ` Peter Ujfalusi
2013-02-07 14:01 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360184596-1603-1-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=balajitk@ti.com \
--cc=balbi@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mporter@ti.com \
--cc=rob.herring@calxeda.com \
--cc=santosh.shilimkar@ti.com \
--cc=sourav.poddar@ti.com \
--cc=tony@atomide.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).