From: Grant Likely <grant.likely@secretlab.ca>
To: linuxppc-dev@list.ozlabs.org, linux-kernel@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>,
Anatolij Gustschin <agust@denx.de>
Subject: [PATCH 2/2] powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files
Date: Fri, 8 Feb 2013 08:02:51 +0000 [thread overview]
Message-ID: <1360310571-31494-2-git-send-email-grant.likely@secretlab.ca> (raw)
In-Reply-To: <1360310571-31494-1-git-send-email-grant.likely@secretlab.ca>
The DTC labels feature allows a dts file to reference a node without
having to reproduce the entire node hierarchy above it. We can use this
to simplify the MPC5200 board dts files by referencing the gpt nodes by
label.
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
arch/powerpc/boot/dts/a3m071.dts | 6 ++--
arch/powerpc/boot/dts/a4m072.dts | 27 ++++--------------
arch/powerpc/boot/dts/cm5200.dts | 6 ++--
arch/powerpc/boot/dts/digsy_mtc.dts | 14 ++--------
arch/powerpc/boot/dts/media5200.dts | 6 ++--
arch/powerpc/boot/dts/motionpro.dts | 26 ++++++++----------
arch/powerpc/boot/dts/mucmc52.dts | 48 ++++++++------------------------
arch/powerpc/boot/dts/o2d.dtsi | 25 +++++------------
arch/powerpc/boot/dts/pcm030.dts | 48 ++++++--------------------------
arch/powerpc/boot/dts/pcm032.dts | 45 ++++++------------------------
arch/powerpc/boot/dts/uc101.dts | 52 ++++++-----------------------------
11 files changed, 69 insertions(+), 234 deletions(-)
diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts
index 877a28c..bf81b8f 100644
--- a/arch/powerpc/boot/dts/a3m071.dts
+++ b/arch/powerpc/boot/dts/a3m071.dts
@@ -17,6 +17,8 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+
/ {
model = "anonymous,a3m071";
compatible = "anonymous,a3m071";
@@ -30,10 +32,6 @@
bus-frequency = <0>; /* From boot loader */
system-frequency = <0>; /* From boot loader */
- timer@600 {
- fsl,has-wdt;
- };
-
spi@f00 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
index fabe7b7..1f02034 100644
--- a/arch/powerpc/boot/dts/a4m072.dts
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -15,6 +15,11 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+
/ {
model = "anonymous,a4m072";
compatible = "anonymous,a4m072";
@@ -34,28 +39,6 @@
fsl,init-fd-counters = <0x3333>;
};
- timer@600 {
- fsl,has-wdt;
- };
-
- gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
spi@f00 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index ad3a4f4..fb580dd 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -12,15 +12,13 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+
/ {
model = "schindler,cm5200";
compatible = "schindler,cm5200";
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
can@900 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index a7511f2..955bff6 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -13,6 +13,9 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { gpio-controller; fsl,has-wdt; };
+&gpt1 { gpio-controller; };
+
/ {
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
@@ -22,17 +25,6 @@
};
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- #gpio-cells = <2>;
- fsl,has-wdt;
- gpio-controller;
- };
-
- timer@610 {
- #gpio-cells = <2>;
- gpio-controller;
- };
-
rtc@800 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 48d72f3..b5413cb 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -13,6 +13,8 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+
/ {
model = "fsl,media5200";
compatible = "fsl,media5200";
@@ -41,10 +43,6 @@
soc5200@f0000000 {
bus-frequency = <132000000>;// 132 MHz
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
psc@2000 { // PSC1
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 0b78e89..bbabd97 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -12,26 +12,22 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt6 { // Motion-PRO status LED
+ compatible = "promess,motionpro-led";
+ label = "motionpro-statusled";
+ blink-delay = <100>; // 100 msec
+};
+&gpt7 { // Motion-PRO ready LED
+ compatible = "promess,motionpro-led";
+ label = "motionpro-readyled";
+};
+
/ {
model = "promess,motionpro";
compatible = "promess,motionpro";
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
- timer@660 { // Motion-PRO status LED
- compatible = "promess,motionpro-led";
- label = "motionpro-statusled";
- blink-delay = <100>; // 100 msec
- };
-
- timer@670 { // Motion-PRO ready LED
- compatible = "promess,motionpro-led";
- label = "motionpro-readyled";
- };
-
can@900 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts
index 21d3472..d3a792b 100644
--- a/arch/powerpc/boot/dts/mucmc52.dts
+++ b/arch/powerpc/boot/dts/mucmc52.dts
@@ -13,47 +13,23 @@
/include/ "mpc5200b.dtsi"
+/* Timer pins that need to be in GPIO mode */
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+
+/* Disabled timers */
+&gpt4 { status = "disabled"; };
+&gpt5 { status = "disabled"; };
+&gpt6 { status = "disabled"; };
+&gpt7 { status = "disabled"; };
+
/ {
model = "manroland,mucmc52";
compatible = "manroland,mucmc52";
soc5200@f0000000 {
- gpt0: timer@600 { // GPT 0 in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt1: timer@610 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt2: timer@620 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt3: timer@630 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- timer@640 {
- status = "disabled";
- };
-
- timer@650 {
- status = "disabled";
- };
-
- timer@660 {
- status = "disabled";
- };
-
- timer@670 {
- status = "disabled";
- };
-
rtc@800 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 24f6680..d26b7e3 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -12,6 +12,13 @@
/include/ "mpc5200b.dtsi"
+&gpt0 {
+ gpio-controller;
+ fsl,has-wdt;
+ fsl,wdt-on-boot = <0>;
+};
+&gpt1 { gpio-controller; };
+
/ {
model = "ifm,o2d";
compatible = "ifm,o2d";
@@ -22,24 +29,6 @@
soc5200@f0000000 {
- gpio_simple: gpio@b00 {
- };
-
- timer@600 { // General Purpose Timer
- #gpio-cells = <2>;
- gpio-controller;
- fsl,has-wdt;
- fsl,wdt-on-boot = <0>;
- };
-
- timer@610 {
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- timer7: timer@670 {
- };
-
rtc@800 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 96512c0..192e66a 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -14,51 +14,19 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
/ {
model = "phytec,pcm030";
compatible = "phytec,pcm030";
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
- gpt2: timer@620 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt3: timer@630 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt4: timer@640 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt5: timer@650 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt6: timer@660 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt7: timer@670 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
audioplatform: psc@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 1dd478b..96b139b 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -14,6 +14,14 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { fsl,has-wdt; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
/ {
model = "phytec,pcm032";
compatible = "phytec,pcm032";
@@ -23,43 +31,6 @@
};
soc5200@f0000000 {
- timer@600 { // General Purpose Timer
- fsl,has-wdt;
- };
-
- gpt2: timer@620 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt3: timer@630 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt4: timer@640 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt5: timer@650 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt6: timer@660 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x660 0x10>;
- interrupts = <1 15 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt7: timer@670 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
psc@2000 { /* PSC1 is ac97 */
compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
cell-index = <0>;
diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts
index ba83d54..5c46219 100644
--- a/arch/powerpc/boot/dts/uc101.dts
+++ b/arch/powerpc/boot/dts/uc101.dts
@@ -13,54 +13,20 @@
/include/ "mpc5200b.dtsi"
+&gpt0 { gpio-controller; };
+&gpt1 { gpio-controller; };
+&gpt2 { gpio-controller; };
+&gpt3 { gpio-controller; };
+&gpt4 { gpio-controller; };
+&gpt5 { gpio-controller; };
+&gpt6 { gpio-controller; };
+&gpt7 { gpio-controller; };
+
/ {
model = "manroland,uc101";
compatible = "manroland,uc101";
soc5200@f0000000 {
- gpt0: timer@600 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt1: timer@610 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt2: timer@620 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt3: timer@630 { // General Purpose Timer in GPIO mode
- compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
- reg = <0x630 0x10>;
- interrupts = <1 12 0>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt4: timer@640 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt5: timer@650 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt6: timer@660 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- gpt7: timer@670 { // General Purpose Timer in GPIO mode
- gpio-controller;
- #gpio-cells = <2>;
- };
-
rtc@800 {
status = "disabled";
};
--
1.7.10.4
next prev parent reply other threads:[~2013-02-08 8:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-08 8:02 [PATCH 1/2] powerpc/5200: Add Lite5200 on-board LEDs as devices Grant Likely
2013-02-08 8:02 ` Grant Likely [this message]
2013-02-11 21:55 ` [PATCH 2/2] powerpc/5200: Use the gpt* labels to simplify mpc5200 dts files Anatolij Gustschin
2013-02-11 21:53 ` [PATCH 1/2] powerpc/5200: Add Lite5200 on-board LEDs as devices Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360310571-31494-2-git-send-email-grant.likely@secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=agust@denx.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@list.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).