From: "Manjunathappa, Prakash" <prakash.pm@ti.com>
To: linux-mmc@vger.kernel.org
Cc: grant.likely@secretlab.ca, rob.herring@calxeda.com,
rob@landley.net, linux@arm.linux.org.uk, nsekhar@ti.com,
hs@denx.de, devicetree-discuss@lists.ozlabs.org,
linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
cjb@laptop.org, davinci-linux-open-source@linux.davincidsp.com,
"Manjunathappa, Prakash" <prakash.pm@ti.com>
Subject: [PATCH v4 0/5] Add DT support for davinci_mmc driver
Date: Fri, 15 Feb 2013 11:51:57 +0530 [thread overview]
Message-ID: <1360909322-1858-1-git-send-email-prakash.pm@ti.com> (raw)
Patch set adds DT support for davinci_mmc driver and is
verified on da850-evm without card_detect/write_protect and
EDMA support. Also takecare to derive controller IP version from
platform_device_id table, remove version specification in pdata.
DT patches depends on below patches under review:
1) Patch "drivers/pinctrl: grab default handles from device core"
http://www.gossamer-threads.com/lists/linux/kernel/1664015?page=last
2) Patch "mmc: davinci: allow driver to work without DMA resource"
http://www.mail-archive.com/linux-mmc@vger.kernel.org/msg18771.html
Applies on top of v3.9/dt-2 branch of linux_davinci tree:
git://gitorious.org/linux-davinci/linux-davinci.git
Since v3:
Added support to derive IP version information from platform_device_id table.
Since v2:
Modified the default value for bus-width and skipping the property specifications
for highspeed card capabilties for now. Re-ordered patch 2 and 3.
Since v1:
Modified the DT parse function to take default values, updated DT binding
documentation accordingly.
Manjunathappa, Prakash (5):
ARM: davinci: mmc: derive version information from device name
mmc: davinci_mmc: derive controller IP version from
platform_device_id
mmc: davinci_mmc: add DT support
ARM: davinci: da850: add mmc DT entries
ARM: davinci: da850: override mmc DT node device name
.../devicetree/bindings/mmc/davinci_mmc.txt | 25 ++++++
arch/arm/boot/dts/da850-evm.dts | 7 ++
arch/arm/boot/dts/da850.dtsi | 14 ++++
arch/arm/mach-davinci/board-da830-evm.c | 1 -
arch/arm/mach-davinci/board-da850-evm.c | 2 -
arch/arm/mach-davinci/board-dm355-evm.c | 1 -
arch/arm/mach-davinci/board-dm365-evm.c | 1 -
arch/arm/mach-davinci/board-dm644x-evm.c | 1 -
arch/arm/mach-davinci/board-neuros-osd2.c | 1 -
arch/arm/mach-davinci/board-omapl138-hawk.c | 1 -
arch/arm/mach-davinci/board-tnetv107x-evm.c | 1 -
arch/arm/mach-davinci/da830.c | 2 +-
arch/arm/mach-davinci/da850.c | 4 +-
arch/arm/mach-davinci/da8xx-dt.c | 2 +
arch/arm/mach-davinci/devices-da8xx.c | 4 +-
arch/arm/mach-davinci/devices-tnetv107x.c | 4 +-
arch/arm/mach-davinci/devices.c | 6 +-
arch/arm/mach-davinci/dm355.c | 4 +-
arch/arm/mach-davinci/dm365.c | 4 +-
arch/arm/mach-davinci/dm644x.c | 2 +-
arch/arm/mach-davinci/tnetv107x.c | 4 +-
drivers/mmc/host/davinci_mmc.c | 83 +++++++++++++++++++-
include/linux/platform_data/mmc-davinci.h | 3 -
23 files changed, 146 insertions(+), 31 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/davinci_mmc.txt
--
1.7.4.1
next reply other threads:[~2013-02-15 6:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-15 6:21 Manjunathappa, Prakash [this message]
2013-02-15 6:21 ` [PATCH v4 1/5] ARM: davinci: mmc: derive version information from device name Manjunathappa, Prakash
2013-02-27 11:45 ` Sekhar Nori
2013-03-05 11:24 ` Manjunathappa, Prakash
2013-02-15 6:21 ` [PATCH v4 2/5] mmc: davinci_mmc: derive controller IP version from platform_device_id Manjunathappa, Prakash
2013-02-15 6:22 ` [PATCH v4 3/5] mmc: davinci_mmc: add DT support Manjunathappa, Prakash
2013-02-27 11:43 ` Sekhar Nori
2013-03-05 11:24 ` Manjunathappa, Prakash
2013-03-05 11:46 ` Sekhar Nori
2013-02-15 6:22 ` [PATCH v4 4/5] ARM: davinci: da850: add mmc DT entries Manjunathappa, Prakash
[not found] ` <1360909322-1858-1-git-send-email-prakash.pm-l0cyMroinI0@public.gmane.org>
2013-02-15 6:22 ` [PATCH v4 5/5] ARM: davinci: da850: override mmc DT node device name Manjunathappa, Prakash
2013-02-27 14:04 ` Rob Herring
2013-02-28 10:51 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360909322-1858-1-git-send-email-prakash.pm@ti.com \
--to=prakash.pm@ti.com \
--cc=cjb@laptop.org \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=hs@denx.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nsekhar@ti.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).