From: Hiroshi Doyu <hdoyu@nvidia.com>
To: linux-tegra@vger.kernel.org
Cc: pdeschrijver@nvidia.com, pgaikwad@nvidia.com,
Hiroshi Doyu <hdoyu@nvidia.com>,
Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Rob Landley <rob@landley.net>,
Stephen Warren <swarren@wwwdotorg.org>,
Russell King <linux@arm.linux.org.uk>,
Simon Glass <sjg@chromium.org>,
devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [v3 3/6] ARM: tegra30: create a DT header defining CLK IDs
Date: Fri, 15 Feb 2013 10:43:14 +0200 [thread overview]
Message-ID: <1360917814-27236-4-git-send-email-hdoyu@nvidia.com> (raw)
In-Reply-To: <1360917814-27236-1-git-send-email-hdoyu@nvidia.com>
To replace magic number in tegra_car:
- clocks = <&tegra_car 28>;
+ clocks = <&tegra_car CLK_HOST1X>;
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
---
arch/arm/boot/dts/tegra30-car.h | 218 +++++++++++++++++++++++++++++++++++++++
1 file changed, 218 insertions(+)
create mode 100644 arch/arm/boot/dts/tegra30-car.h
diff --git a/arch/arm/boot/dts/tegra30-car.h b/arch/arm/boot/dts/tegra30-car.h
new file mode 100644
index 0000000..75edf761
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-car.h
@@ -0,0 +1,218 @@
+/*
+ * This header provides constants for binding nvidia,tegra30-car.
+ *
+ * The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 160 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ * above.
+ */
+
+#ifndef _DT_TEGRA30_CAR_H
+#define _DT_TEGRA30_CAR_H
+
+#define TEGRA30_CLK_CPU 0
+/* 1 */
+/* 2 */
+/* 3 */
+#define TEGRA30_CLK_RTC 4
+#define TEGRA30_CLK_TIMER 5
+#define TEGRA30_CLK_UARTA 6
+/* 7 */ /* register bit affects uartb and vfir */
+#define TEGRA30_CLK_GPIO 8
+#define TEGRA30_CLK_SDMMC2 9
+/* 10 */ /* register bit affects spdif_in and spdif_out */
+#define TEGRA30_CLK_I2S1 11
+#define TEGRA30_CLK_I2C1 12
+#define TEGRA30_CLK_NDFLASH 13
+#define TEGRA30_CLK_SDMMC1 14
+#define TEGRA30_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA30_CLK_PWM 17
+#define TEGRA30_CLK_I2S2 18
+#define TEGRA30_CLK_EPP 19
+/* 20 */ /* register bit affects vi and vi_sensor */
+#define TEGRA30_CLK_GR2D 21
+#define TEGRA30_CLK_USBD 22
+#define TEGRA30_CLK_ISP 23
+#define TEGRA30_CLK_GR3D 24
+/* 25 */
+#define TEGRA30_CLK_DISP2 26
+#define TEGRA30_CLK_DISP1 27
+#define TEGRA30_CLK_HOST1X 28
+#define TEGRA30_CLK_VCP 29
+#define TEGRA30_CLK_I2S0 30
+#define TEGRA30_CLK_COP_CACHE 31
+
+#define TEGRA30_CLK_MC 32
+#define TEGRA30_CLK_AHBDMA 33
+#define TEGRA30_CLK_APBDMA 34
+/* 35 */
+#define TEGRA30_CLK_KBC 36
+#define TEGRA30_CLK_STATMON 37
+#define TEGRA30_CLK_PMC 38
+/* 39 */ /* register bit affects fuse and fuse_burn */
+#define TEGRA30_CLK_KFUSE 40
+#define TEGRA30_CLK_SBC1 41
+#define TEGRA30_CLK_NOR 42
+/* 43 */
+#define TEGRA30_CLK_SBC2 44
+/* 45 */
+#define TEGRA30_CLK_SBC3 46
+#define TEGRA30_CLK_I2C5 47
+#define TEGRA30_CLK_DSIA 48
+/* 49 */ /* register bit affects cve and tvo */
+#define TEGRA30_CLK_MIPI 50
+#define TEGRA30_CLK_HDMI 51
+#define TEGRA30_CLK_CSI 52
+#define TEGRA30_CLK_TVDAC 53
+#define TEGRA30_CLK_I2C2 54
+#define TEGRA30_CLK_UARTC 55
+/* 56 */
+#define TEGRA30_CLK_EMC 57
+#define TEGRA30_CLK_USB2 58
+#define TEGRA30_CLK_USB3 59
+#define TEGRA30_CLK_MPE 60
+#define TEGRA30_CLK_VDE 61
+#define TEGRA30_CLK_BSEA 62
+#define TEGRA30_CLK_BSEV 63
+
+#define TEGRA30_CLK_SPEEDO 64
+#define TEGRA30_CLK_UARTD 65
+#define TEGRA30_CLK_UARTE 66
+#define TEGRA30_CLK_I2C3 67
+#define TEGRA30_CLK_SBC4 68
+#define TEGRA30_CLK_SDMMC3 69
+#define TEGRA30_CLK_PCIE 70
+#define TEGRA30_CLK_OWR 71
+#define TEGRA30_CLK_AFI 72
+#define TEGRA30_CLK_CSITE 73
+#define TEGRA30_CLK_PCIEX 74
+#define TEGRA30_CLK_AVPUCQ 75
+#define TEGRA30_CLK_LA 76
+/* 77 */
+/* 78 */
+#define TEGRA30_CLK_DTV 79
+#define TEGRA30_CLK_NDSPEED 80
+#define TEGRA30_CLK_I2CSLOW 81
+#define TEGRA30_CLK_DSIB 82
+/* 83 */
+#define TEGRA30_CLK_IRAMA 84
+#define TEGRA30_CLK_IRAMB 85
+#define TEGRA30_CLK_IRAMC 86
+#define TEGRA30_CLK_IRAMD 87
+#define TEGRA30_CLK_CRAM2 88
+/* 89 */
+#define TEGRA30_CLK_AUDIO_2X 90 /* audio_2x_sync_clk */
+/* 91 */
+#define TEGRA30_CLK_CSUS 92
+#define TEGRA30_CLK_CDEV1 93
+#define TEGRA30_CLK_CDEV2 94
+/* 95 */
+
+#define TEGRA30_CLK_CPU_G 96
+#define TEGRA30_CLK_CPU_LP 97
+#define TEGRA30_CLK_GR3D2 98
+#define TEGRA30_CLK_MSELECT 99
+#define TEGRA30_CLK_TSENSOR 100
+#define TEGRA30_CLK_I2S3 101
+#define TEGRA30_CLK_I2S4 102
+#define TEGRA30_CLK_I2C4 103
+#define TEGRA30_CLK_SBC5 104
+#define TEGRA30_CLK_SBC6 105
+#define TEGRA30_CLK_D_AUDIO 106
+#define TEGRA30_CLK_APBIF 107
+#define TEGRA30_CLK_DAM0 108
+#define TEGRA30_CLK_DAM1 109
+#define TEGRA30_CLK_DAM2 110
+#define TEGRA30_CLK_HDA2CODEC_2X 111
+#define TEGRA30_CLK_ATOMICS 112
+#define TEGRA30_CLK_AUDIO0_2X 113
+#define TEGRA30_CLK_AUDIO1_2X 114
+#define TEGRA30_CLK_AUDIO2_2X 115
+#define TEGRA30_CLK_AUDIO3_2X 116
+#define TEGRA30_CLK_AUDIO4_2X 117
+#define TEGRA30_CLK_SPDIF_2X 118
+#define TEGRA30_CLK_ACTMON 119
+#define TEGRA30_CLK_EXTERN1 120
+#define TEGRA30_CLK_EXTERN2 121
+#define TEGRA30_CLK_EXTERN3 122
+#define TEGRA30_CLK_SATA_OOB 123
+#define TEGRA30_CLK_SATA 124
+#define TEGRA30_CLK_HDA 125
+/* 126 */
+#define TEGRA30_CLK_SE 127
+
+#define TEGRA30_CLK_HDA2HDMI 128
+#define TEGRA30_CLK_SATA_COLD 129
+
+#define TEGRA30_CLK_UARTB 160
+#define TEGRA30_CLK_VFIR 161
+#define TEGRA30_CLK_SPDIF_IN 162
+#define TEGRA30_CLK_SPDIF_OUT 163
+#define TEGRA30_CLK_VI 164
+#define TEGRA30_CLK_VI_SENSOR 165
+#define TEGRA30_CLK_FUSE 166
+#define TEGRA30_CLK_FUSE_BURN 167
+#define TEGRA30_CLK_CVE 168
+#define TEGRA30_CLK_TVO 169
+#define TEGRA30_CLK_32K 170
+#define TEGRA30_CLK_M 171
+#define TEGRA30_CLK_M_DIV2 172
+#define TEGRA30_CLK_M_DIV4 173
+#define TEGRA30_CLK_PLL_REF 174
+#define TEGRA30_CLK_PLL_C 175
+#define TEGRA30_CLK_PLL_C_OUT1 176
+#define TEGRA30_CLK_PLL_M 177
+#define TEGRA30_CLK_PLL_M_OUT1 178
+#define TEGRA30_CLK_PLL_P 179
+#define TEGRA30_CLK_PLL_P_OUT1 180
+#define TEGRA30_CLK_PLL_P_OUT2 181
+#define TEGRA30_CLK_PLL_P_OUT3 182
+#define TEGRA30_CLK_PLL_P_OUT4 183
+#define TEGRA30_CLK_PLL_A 184
+#define TEGRA30_CLK_PLL_A_OUT0 185
+#define TEGRA30_CLK_PLL_D 186
+#define TEGRA30_CLK_PLL_D_OUT0 187
+#define TEGRA30_CLK_PLL_D2 188
+#define TEGRA30_CLK_PLL_D2_OUT0 189
+#define TEGRA30_CLK_PLL_U 190
+#define TEGRA30_CLK_PLL_X 191
+
+#define TEGRA30_CLK_PLL_X_OUT0 192
+#define TEGRA30_CLK_PLL_E 193
+#define TEGRA30_CLK_SPDIF_IN_SYNC 194
+#define TEGRA30_CLK_I2S0_SYNC 195
+#define TEGRA30_CLK_I2S1_SYNC 196
+#define TEGRA30_CLK_I2S2_SYNC 197
+#define TEGRA30_CLK_I2S3_SYNC 198
+#define TEGRA30_CLK_I2S4_SYNC 199
+#define TEGRA30_CLK_VIMCLK_SYNC 200
+#define TEGRA30_CLK_AUDIO0 201
+#define TEGRA30_CLK_AUDIO1 202
+#define TEGRA30_CLK_AUDIO2 203
+#define TEGRA30_CLK_AUDIO3 204
+#define TEGRA30_CLK_AUDIO4 205
+#define TEGRA30_CLK_SPDIF 206
+#define TEGRA30_CLK_OUT_1 207
+#define TEGRA30_CLK_OUT_2 208
+#define TEGRA30_CLK_OUT_3 209
+#define TEGRA30_CLK_SCLK 210
+#define TEGRA30_CLK_BLINK 211
+#define TEGRA30_CLK_CCLK_G 212
+#define TEGRA30_CLK_CCLK_LP 213
+#define TEGRA30_CLK_TWD 214
+#define TEGRA30_CLK_CML0 215
+#define TEGRA30_CLK_CML1 216
+#define TEGRA30_CLK_HCLK 217
+#define TEGRA30_CLK_PCLK 218
+
+#define TEGRA30_CLK_OUT_1_MUX 300
+#define TEGRA30_CLK_MAX 301
+
+#endif /* _DT_TEGRA30_CAR_H */
--
1.7.9.5
next prev parent reply other threads:[~2013-02-15 8:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-15 8:43 [v3 0/6] ARM: tegra: convert device tree files to use CLK defines Hiroshi Doyu
2013-02-15 8:43 ` [v3 1/6] ARM: tegra20: create a DT header defining CLK IDs Hiroshi Doyu
2013-02-15 8:43 ` Hiroshi Doyu [this message]
2013-02-15 8:43 ` [v3 5/6] ARM: tegra114: " Hiroshi Doyu
[not found] ` <1360917814-27236-6-git-send-email-hdoyu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-15 16:43 ` Stephen Warren
2013-02-15 8:43 ` [v3 6/6] ARM: tegra114: convert device tree files to use CLK defines Hiroshi Doyu
[not found] ` <1360917814-27236-1-git-send-email-hdoyu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-15 8:43 ` [v3 2/6] ARM: tegra20: " Hiroshi Doyu
[not found] ` <1360917814-27236-3-git-send-email-hdoyu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-15 16:41 ` Stephen Warren
2013-02-15 8:43 ` [v3 4/6] ARM: tegra30: " Hiroshi Doyu
2013-02-17 22:05 ` [v3 0/6] ARM: tegra: " Rob Landley
2013-02-19 17:10 ` Stephen Warren
[not found] ` <5123B1F8.4040102-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-23 19:51 ` Rob Landley
2013-02-23 23:52 ` Stephen Warren
2013-02-17 22:20 ` Simon Glass
2013-02-19 17:08 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360917814-27236-4-git-send-email-hdoyu@nvidia.com \
--to=hdoyu@nvidia.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sjg@chromium.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).