From: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: durgadoss.r-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
MLongnecker-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TZX6JHB/w77yyCwEArCW2h5@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [RFC PATCH 1/9] ARM: dt: t30 cardhu: add dt entry for lm90
Date: Mon, 18 Feb 2013 19:30:23 +0800 [thread overview]
Message-ID: <1361187031-3679-2-git-send-email-wni@nvidia.com> (raw)
In-Reply-To: <1361187031-3679-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Enable thermal sensor lm90 in the dts file.
Signed-off-by: Wei Ni <wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra30-cardhu.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index bdb2a66..15ad1ad 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -273,6 +273,13 @@
};
};
};
+
+ nct1008: lm90@4c {
+ compatible = "lm90";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <226 0x08>; /* gpio PCC2 */
+ };
};
spi@7000da00 {
--
1.7.9.5
next prev parent reply other threads:[~2013-02-18 11:30 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-18 11:30 [RFC PATCH 0/9] Support for tegra30 thermal Wei Ni
2013-02-18 11:30 ` [RFC PATCH 2/9] hwmon: (lm90) split set&show temp as common codes Wei Ni
2013-02-18 22:29 ` Matthew Longnecker
2013-02-19 9:48 ` Wei Ni
2013-02-19 3:31 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130219033144.GA25610-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-19 10:00 ` Wei Ni
2013-02-19 22:56 ` Stephen Warren
[not found] ` <51240331.7080604-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-20 12:31 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 4/9] hwmon: (lm90) use macros for the indexes of temp8 and temp11 Wei Ni
2013-02-19 5:39 ` Alex Courbot
[not found] ` <5123100A.9050604-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 9:58 ` Wei Ni
2013-02-19 23:02 ` Stephen Warren
[not found] ` <51240497.8010909-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-20 10:29 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 7/9] thermal: tegra30: add tegra30 thermal driver Wei Ni
2013-02-19 23:48 ` Stephen Warren
2013-02-20 12:23 ` Wei Ni
2013-02-19 23:56 ` Russell King - ARM Linux
[not found] ` <20130219235629.GU17833-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2013-02-20 12:29 ` Wei Ni
[not found] ` <1361187031-3679-1-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-18 11:30 ` Wei Ni [this message]
[not found] ` <1361187031-3679-2-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 3:28 ` [RFC PATCH 1/9] ARM: dt: t30 cardhu: add dt entry for lm90 Alex Courbot
2013-02-19 9:52 ` Wei Ni
[not found] ` <5122F162.9030103-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 22:48 ` Stephen Warren
2013-02-18 11:30 ` [RFC PATCH 3/9] hwmon: (lm90) add support to handle irq Wei Ni
[not found] ` <1361187031-3679-4-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 3:34 ` [lm-sensors] " Guenter Roeck
2013-02-19 10:43 ` Wei Ni
2013-02-19 23:00 ` Stephen Warren
2013-02-20 3:27 ` Alex Courbot
[not found] ` <5124429B.2000404-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-20 10:27 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 5/9] Thermal: Support using dt node to get sensor Wei Ni
[not found] ` <1361187031-3679-6-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 23:12 ` Stephen Warren
[not found] ` <512406F0.4080708-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-02-20 10:36 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 6/9] hwmon: (lm90) Register to the thermal framework Wei Ni
2013-02-19 3:42 ` [lm-sensors] " Guenter Roeck
[not found] ` <20130219034205.GC25610-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-02-19 10:47 ` Wei Ni
2013-02-19 5:22 ` Alex Courbot
2013-02-19 10:58 ` Wei Ni
[not found] ` <1361187031-3679-7-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 23:18 ` Stephen Warren
2013-02-20 10:40 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 8/9] ARM: dt: t30 cardhu: add dt entry for thermal driver Wei Ni
2013-02-19 3:42 ` Alex Courbot
2013-02-19 9:56 ` Wei Ni
[not found] ` <1361187031-3679-9-git-send-email-wni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-19 23:28 ` Stephen Warren
2013-02-20 11:53 ` Wei Ni
[not found] ` <5124B934.3020900-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-02-20 17:18 ` Stephen Warren
2013-02-18 11:30 ` [RFC PATCH 9/9] ARM: tegra: defconfig: enable thermal framework Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361187031-3679-2-git-send-email-wni@nvidia.com \
--to=wni-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=MLongnecker-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=durgadoss.r-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TZX6JHB/w77yyCwEArCW2h5@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
--cc=rui.zhang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).