[PATCH v2 0/8] ARM: dts: omap: Add dts data for USB

[PATCH v2 0/8] ARM: dts: omap: Add dts data for USB

[Kishon Vijay Abraham I]

Hi Benoit,

Here are the dt data patches to get usb device functional in OMAP platforms.
This series applies cleanly in both for_3.9/dts and 3.8-rc6.

All the patches deal with modifying arch/arm/boot except one which modifies
Documentation/../usb/omap-usb.txt

Changes from v1:

Patch *ARM: dts: omap: Add usb_otg and glue data* has some properties with
names that has "_". It's replaced with a "-" here.

This patch is developed on Linux 3.9-rc1.

Kishon Vijay Abraham I (8):
  ARM: dts: omap: Add omap control usb data
  ARM: dts: omap: Add omap-usb2 dt data
  ARM: dts: omap: Add usb_otg and glue data
  ARM: dts: omap5: Add omap control usb data
  ARM: dts: omap5: Add ocp2scp data
  ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data
  ARM: dts: omap5: add dwc3 omap dt data
  ARM: dts: omap5: add dwc3 core dt data

 Documentation/devicetree/bindings/usb/omap-usb.txt |    1 +
 arch/arm/boot/dts/omap3-beagle-xm.dts              |    6 +++
 arch/arm/boot/dts/omap3-evm.dts                    |    6 +++
 arch/arm/boot/dts/omap3-overo.dtsi                 |    6 +++
 arch/arm/boot/dts/omap3.dtsi                       |   12 +++++
 arch/arm/boot/dts/omap4-panda.dts                  |    6 +++
 arch/arm/boot/dts/omap4-sdp.dts                    |    6 +++
 arch/arm/boot/dts/omap4.dtsi                       |   26 +++++++++++
 arch/arm/boot/dts/omap5.dtsi                       |   48 ++++++++++++++++++++
 arch/arm/boot/dts/twl4030.dtsi                     |    2 +-
 10 files changed, 118 insertions(+), 1 deletion(-)

-- 
1.7.10.4

[PATCH v2 1/8] ARM: dts: omap: Add omap control usb data

[Kishon Vijay Abraham I]

Add omap control usb data in omap4 device tree file. This will have the
register address of registers to power on the PHY and to write to
mailbox. The information about this data node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/omap4.dtsi |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 739bb79..ffc7352 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -529,5 +529,13 @@
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
+
+		omap_control_usb: omap-control-usb@4a002300 {
+			compatible = "ti,omap-control-usb";
+			reg = <0x4a002300 0x4>,
+			      <0x4a00233c 0x4>;
+			reg-names = "control_dev_conf", "otghs_control";
+			ti,type = <1>;
+		};
 	};
 };
-- 
1.7.10.4

[PATCH v2 2/8] ARM: dts: omap: Add omap-usb2 dt data

[Kishon Vijay Abraham I]

Add omap-usb2 data node in omap4 device tree file. Since omap-usb2 is
connected to ocp2scp, omap-usb2 dt data is added as a child node
of ocp2scp. The information about this data node is availabe @
Documentation/devicetree/bindings/usb/usb-phy.txt

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/omap4.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index ffc7352..c829d7e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -438,6 +438,11 @@
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
+			usb2_phy: usb2phy@4a0ad080 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a0ad080 0x58>;
+				ctrl-module = <&omap_control_usb>;
+			};
 		};
 
 		timer1: timer@4a318000 {
-- 
1.7.10.4

[PATCH v2 3/8] ARM: dts: omap: Add usb_otg and glue data

[Kishon Vijay Abraham I]

Add usb otg data node in omap4/omap3 device tree file. Also update
the node with board specific setting in omapx-<board>.dts file.
The dt data specifies among others the interface type (ULPI or UTMI), mode
which is mostly OTG, power that specifies the amount of power this can supply
when in host mode.
The information about usb otg node is available @
Documentation/devicetree/bindings/usb/omap-usb.txt

Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/usb/omap-usb.txt |    1 +
 arch/arm/boot/dts/omap3-beagle-xm.dts              |    6 ++++++
 arch/arm/boot/dts/omap3-evm.dts                    |    6 ++++++
 arch/arm/boot/dts/omap3-overo.dtsi                 |    6 ++++++
 arch/arm/boot/dts/omap3.dtsi                       |   12 ++++++++++++
 arch/arm/boot/dts/omap4-panda.dts                  |    6 ++++++
 arch/arm/boot/dts/omap4-sdp.dts                    |    6 ++++++
 arch/arm/boot/dts/omap4.dtsi                       |   13 +++++++++++++
 arch/arm/boot/dts/twl4030.dtsi                     |    2 +-
 9 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index b198935..4af63b5 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -18,6 +18,7 @@ OMAP MUSB GLUE
    represents PERIPHERAL.
  - power : Should be "50". This signifies the controller can supply upto
    100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
 
 Optional properties:
  - ctrl-module : phandle of the control module this glue uses to write to
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 3705a81..5f8226a 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -107,3 +107,9 @@
 	 */
 	ti,pulldowns = <0x03a1c4>;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e8ba1c2..6e6f80d 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -59,3 +59,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi
index 89808ce..e3979b1 100644
--- a/arch/arm/boot/dts/omap3-overo.dtsi
+++ b/arch/arm/boot/dts/omap3-overo.dtsi
@@ -55,3 +55,9 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..1e21565 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,17 @@
 			ti,timer-alwon;
 			ti,timer-secure;
 		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb-phy = <&usb2_phy>;
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 4122efe..6531f75 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -206,3 +206,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 43e5258..f3adbf51 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -428,3 +428,9 @@
 &twl_usb_comparator {
 	usb-supply = <&vusb>;
 };
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index c829d7e..06d044e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -542,5 +542,18 @@
 			reg-names = "control_dev_conf", "otghs_control";
 			ti,type = <1>;
 		};
+
+		usb_otg_hs: usb_otg_hs@4a0ab000 {
+			compatible = "ti,omap4-musb";
+			reg = <0x4a0ab000 0x7ff>;
+			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb-phy = <&usb2_phy>;
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+			ti,has-mailbox;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ed0bc95..398d2c3 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -67,7 +67,7 @@
 		#interrupt-cells = <1>;
 	};
 
-	twl4030-usb {
+	usb2_phy: twl4030-usb {
 		compatible = "ti,twl4030-usb";
 		interrupts = <10>, <4>;
 		usb1v5-supply = <&vusb1v5>;
-- 
1.7.10.4

[PATCH v2 4/8] ARM: dts: omap5: Add omap control usb data

[Kishon Vijay Abraham I]

Add omap control usb data in omap5 device tree file. This will have the
register address of registers to power on the USB2 PHY and USB3 PHY. The
information for the node added here is available in
Documentation/devicetree/bindings/usb/omap-usb.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 790bb2a..c937500 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -496,5 +496,13 @@
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
 		};
+
+		omap_control_usb: omap-control-usb@4a002300 {
+			compatible = "ti,omap-control-usb";
+			reg = <0x4a002300 0x4>,
+			      <0x4a002370 0x4>;
+			reg-names = "control_dev_conf", "phy_power_usb";
+			ti,type = <2>;
+		};
 	};
 };
-- 
1.7.10.4

[PATCH v2 5/8] ARM: dts: omap5: Add ocp2scp data

[Kishon Vijay Abraham I]

Add ocp2scp data node in omap5 device tree file. The information for
the node added here can be found @
Documentation/devicetree/bindings/bus/omap-ocp2scp.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index c937500..230b779 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -504,5 +504,13 @@
 			reg-names = "control_dev_conf", "phy_power_usb";
 			ti,type = <2>;
 		};
+
+		ocp2scp {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+		};
 	};
 };
-- 
1.7.10.4

[PATCH v2 6/8] ARM: dts: omap5: Add omap-usb3 and omap-usb2 dt data

[Kishon Vijay Abraham I]

Add omap-usb3 and omap-usb2 data node in omap5 device tree file.
The information for the node added here is available @
Documentation/devicetree/bindings/usb/usb-phy.txt

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap5.dtsi |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 230b779..bd73257 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -511,6 +511,20 @@
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp1";
+			usb2_phy: usb2phy@4a084000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a084000 0x7c>;
+				ctrl-module = <&omap_control_usb>;
+			};
+
+			usb3_phy: usb3phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_usb>;
+			};
 		};
 	};
 };
-- 
1.7.10.4

[PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data

[Kishon Vijay Abraham I]

Add dwc3 omap glue data to the omap5 dt data file. The information about
the dt node added here is available @
Documentation/devicetree/bindings/usb/omap-usb.txt

Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 arch/arm/boot/dts/omap5.dtsi |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index bd73257..c4eb2ec 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -505,6 +505,17 @@
 			ti,type = <2>;
 		};
 
+		omap_dwc3@4a020000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss";
+			reg = <0x4a020000 0x1000>;
+			interrupts = <0 93 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+		};
+
 		ocp2scp {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
-- 
1.7.10.4

Re: [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data

[Sergei Shtylyov]

Hello.

On 05-03-2013 18:37, Kishon Vijay Abraham I wrote:

> Add dwc3 omap glue data to the omap5 dt data file. The information about
> the dt node added here is available @
> Documentation/devicetree/bindings/usb/omap-usb.txt

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>   arch/arm/boot/dts/omap5.dtsi |   11 +++++++++++
>   1 file changed, 11 insertions(+)

> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index bd73257..c4eb2ec 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -505,6 +505,17 @@
>   			ti,type = <2>;
>   		};
>
> +		omap_dwc3@4a020000 {
> +			compatible = "ti,dwc3";
> +			ti,hwmods = "usb_otg_ss";
> +			reg = <0x4a020000 0x1000>;
> +			interrupts = <0 93 4>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;

   Why the above two props? You don't seem to have the subnodes...

WBR, Sergei

Re: [PATCH v2 7/8] ARM: dts: omap5: add dwc3 omap dt data

[kishon]

Hi,

On Tuesday 05 March 2013 08:11 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 05-03-2013 18:37, Kishon Vijay Abraham I wrote:
>
>> Add dwc3 omap glue data to the omap5 dt data file. The information about
>> the dt node added here is available @
>> Documentation/devicetree/bindings/usb/omap-usb.txt
>
>> Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
>> ---
>>   arch/arm/boot/dts/omap5.dtsi |   11 +++++++++++
>>   1 file changed, 11 insertions(+)
>
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index bd73257..c4eb2ec 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -505,6 +505,17 @@
>>               ti,type = <2>;
>>           };
>>
>> +        omap_dwc3@4a020000 {
>> +            compatible = "ti,dwc3";
>> +            ti,hwmods = "usb_otg_ss";
>> +            reg = <0x4a020000 0x1000>;
>> +            interrupts = <0 93 4>;
>> +            #address-cells = <1>;
>> +            #size-cells = <1>;
>
>    Why the above two props? You don't seem to have the subnodes...

It's added in the next patch. Ok, Felipe has already pointed out to 
merge the two patches.

Thanks
Kishon

[PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data

[Kishon Vijay Abraham I]

Add dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt
data file. The information for the entered data node is available @
Documentation/devicetree/bindings/usb/dwc3.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index c4eb2ec..24dd69f 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -514,6 +514,13 @@
 			#size-cells = <1>;
 			utmi-mode = <2>;
 			ranges;
+			dwc3@4a030000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x4a030000 0x1000>;
+				interrupts = <0 92 4>;
+				usb-phy = <&usb2_phy>, <&usb3_phy>;
+				tx-fifo-resize;
+			};
 		};
 
 		ocp2scp {
-- 
1.7.10.4

Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 1066 bytes --]

Hi,

On Tue, Mar 05, 2013 at 08:07:03PM +0530, Kishon Vijay Abraham I wrote:
> Add dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt
> data file. The information for the entered data node is available @
> Documentation/devicetree/bindings/usb/dwc3.txt
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
> ---
>  arch/arm/boot/dts/omap5.dtsi |    7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index c4eb2ec..24dd69f 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -514,6 +514,13 @@
>  			#size-cells = <1>;
>  			utmi-mode = <2>;
>  			ranges;
> +			dwc3@4a030000 {
> +				compatible = "synopsys,dwc3";
> +				reg = <0x4a030000 0x1000>;
> +				interrupts = <0 92 4>;
> +				usb-phy = <&usb2_phy>, <&usb3_phy>;
> +				tx-fifo-resize;

I think this should be merged with previous patch. Also, we need to
check whether tx-fifo-resize is needed with ES2 or not ;-)

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 192 bytes --]

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data

[kishon]

Hi,

On Tuesday 05 March 2013 08:09 PM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Mar 05, 2013 at 08:07:03PM +0530, Kishon Vijay Abraham I wrote:
>> Add dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt
>> data file. The information for the entered data node is available @
>> Documentation/devicetree/bindings/usb/dwc3.txt
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>   arch/arm/boot/dts/omap5.dtsi |    7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>> index c4eb2ec..24dd69f 100644
>> --- a/arch/arm/boot/dts/omap5.dtsi
>> +++ b/arch/arm/boot/dts/omap5.dtsi
>> @@ -514,6 +514,13 @@
>>   			#size-cells = <1>;
>>   			utmi-mode = <2>;
>>   			ranges;
>> +			dwc3@4a030000 {
>> +				compatible = "synopsys,dwc3";
>> +				reg = <0x4a030000 0x1000>;
>> +				interrupts = <0 92 4>;
>> +				usb-phy = <&usb2_phy>, <&usb3_phy>;
>> +				tx-fifo-resize;
>
> I think this should be merged with previous patch. Also, we need to
> check whether tx-fifo-resize is needed with ES2 or not ;-)

yeah. ES2 works without tx-fifo-resize.

Thanks
Kishon

Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2132 bytes --]

Hi,

On Wed, Mar 06, 2013 at 02:25:48PM +0530, kishon wrote:
> Hi,
> 
> On Tuesday 05 March 2013 08:09 PM, Felipe Balbi wrote:
> >Hi,
> >
> >On Tue, Mar 05, 2013 at 08:07:03PM +0530, Kishon Vijay Abraham I wrote:
> >>Add dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt
> >>data file. The information for the entered data node is available @
> >>Documentation/devicetree/bindings/usb/dwc3.txt
> >>
> >>Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> >>---
> >>  arch/arm/boot/dts/omap5.dtsi |    7 +++++++
> >>  1 file changed, 7 insertions(+)
> >>
> >>diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> >>index c4eb2ec..24dd69f 100644
> >>--- a/arch/arm/boot/dts/omap5.dtsi
> >>+++ b/arch/arm/boot/dts/omap5.dtsi
> >>@@ -514,6 +514,13 @@
> >>  			#size-cells = <1>;
> >>  			utmi-mode = <2>;
> >>  			ranges;
> >>+			dwc3@4a030000 {
> >>+				compatible = "synopsys,dwc3";
> >>+				reg = <0x4a030000 0x1000>;
> >>+				interrupts = <0 92 4>;
> >>+				usb-phy = <&usb2_phy>, <&usb3_phy>;
> >>+				tx-fifo-resize;
> >
> >I think this should be merged with previous patch. Also, we need to
> >check whether tx-fifo-resize is needed with ES2 or not ;-)
> 
> yeah. ES2 works without tx-fifo-resize.

Great, I guess we can deprecate that attribute. Can you check if ES2
still works with:

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 82e160e..cad0131 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2029,6 +2029,8 @@ static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
 {
 	u32			reg;
 
+	return;
+
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
 	if (suspend)
@@ -2043,6 +2045,8 @@ static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
 {
 	u32			reg;
 
+	return;
+
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 
 	if (suspend)


starting on 1.94a (IIRC) core was supposed to control PHYs directly and
since there's nobody in linux mainline using any version prior to 1.94a,
we could drop that too.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v2 8/8] ARM: dts: omap5: add dwc3 core dt data

[kishon]

On Wednesday 06 March 2013 02:49 PM, Felipe Balbi wrote:
> Hi,
>
> On Wed, Mar 06, 2013 at 02:25:48PM +0530, kishon wrote:
>> Hi,
>>
>> On Tuesday 05 March 2013 08:09 PM, Felipe Balbi wrote:
>>> Hi,
>>>
>>> On Tue, Mar 05, 2013 at 08:07:03PM +0530, Kishon Vijay Abraham I wrote:
>>>> Add dwc3 core dt data as a subnode to dwc3 omap glue data in omap5 dt
>>>> data file. The information for the entered data node is available @
>>>> Documentation/devicetree/bindings/usb/dwc3.txt
>>>>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>> ---
>>>>   arch/arm/boot/dts/omap5.dtsi |    7 +++++++
>>>>   1 file changed, 7 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
>>>> index c4eb2ec..24dd69f 100644
>>>> --- a/arch/arm/boot/dts/omap5.dtsi
>>>> +++ b/arch/arm/boot/dts/omap5.dtsi
>>>> @@ -514,6 +514,13 @@
>>>>   			#size-cells = <1>;
>>>>   			utmi-mode = <2>;
>>>>   			ranges;
>>>> +			dwc3@4a030000 {
>>>> +				compatible = "synopsys,dwc3";
>>>> +				reg = <0x4a030000 0x1000>;
>>>> +				interrupts = <0 92 4>;
>>>> +				usb-phy = <&usb2_phy>, <&usb3_phy>;
>>>> +				tx-fifo-resize;
>>>
>>> I think this should be merged with previous patch. Also, we need to
>>> check whether tx-fifo-resize is needed with ES2 or not ;-)
>>
>> yeah. ES2 works without tx-fifo-resize.
>
> Great, I guess we can deprecate that attribute. Can you check if ES2
> still works with:
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 82e160e..cad0131 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2029,6 +2029,8 @@ static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
>   {
>   	u32			reg;
>
> +	return;
> +
>   	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
>
>   	if (suspend)
> @@ -2043,6 +2045,8 @@ static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
>   {
>   	u32			reg;
>
> +	return;
> +
>   	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
>
>   	if (suspend)
>
>
> starting on 1.94a (IIRC) core was supposed to control PHYs directly and
> since there's nobody in linux mainline using any version prior to 1.94a,
> we could drop that too.

Will check that in a while.

Thanks
Kishon