From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Subject: [PATCH 3/7] kbuild: cmd_dtc_cpp: extract deps from both gcc -E and dtc Date: Wed, 6 Mar 2013 11:22:59 -0700 Message-ID: <1362594183-21523-3-git-send-email-swarren@wwwdotorg.org> References: <1362594183-21523-1-git-send-email-swarren@wwwdotorg.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1362594183-21523-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Grant Likely , Rob Herring Cc: Michal Marek , Stephen Warren , linux-kbuild-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org From: Stephen Warren Prior to this change, when compiling *.dts to *.dtb, the dependency output from dtc would be used, and when compiling *.dtsp to *.dtb, the dependency output from gcc -E alone would be used, despite dtc also being invoked (on a temporary file that was guaranteed to have no dependencies). With this change, when compiling *.dtsp to *.dtb, the dependency files from both gcc -E and dtc are used. This will allow cmd_dtc_cpp to replace cmd_dtc in a future change. In turn, that will allow the C pre- processor to be run transparently on *.dts, without the need to a separate rule or file extension to trigger it. Signed-off-by: Stephen Warren --- scripts/Makefile.lib | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index af35521..6104335 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -156,7 +156,7 @@ cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ ld_flags = $(LDFLAGS) $(ldflags-y) -dtc_cpp_flags = -Wp,-MD,$(depfile) -nostdinc \ +dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \ -I$(srctree)/arch/$(SRCARCH)/boot/dts \ -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \ -undef -D__DTS__ @@ -278,7 +278,8 @@ dtc-tmp = $(subst $(comma),_,$(dot-target).dts) quiet_cmd_dtc_cpp = DTC+CPP $@ cmd_dtc_cpp = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ - $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) $(dtc-tmp) + $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) -d $(depfile).dtc $(dtc-tmp) ; \ + cat $(depfile).pre $(depfile).dtc > $(depfile) $(obj)/%.dtb: $(src)/%.dtsp FORCE $(call if_changed_dep,dtc_cpp) -- 1.7.10.4