From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH v2 12/23] ARM: OMAP: devkit8000: Adapt to ehci-omap changes Date: Fri, 15 Mar 2013 17:16:33 +0200 Message-ID: <1363360604-21368-13-git-send-email-rogerq@ti.com> References: <1363360604-21368-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1363360604-21368-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, rogerq-l0cyMroinI0@public.gmane.org List-Id: devicetree@vger.kernel.org Add platform device for 'nop-usb-xceiv'. This will be used as a PHY for HS USB Port 1, so provide binding information for it. Signed-off-by: Roger Quadros Acked-by: Felipe Balbi --- arch/arm/mach-omap2/board-devkit8000.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 53056c3..922ca91 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -33,6 +33,7 @@ #include #include +#include #include "id.h" #include #include @@ -430,22 +431,21 @@ static void __init omap_dm9000_init(void) eth_addr[5] = (odi.id_0 & 0x000000ff); } +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct platform_device hsusb1_phy_device = { + .name = "nop_usb_xceiv", + .id = 1, +}; + static struct platform_device *devkit8000_devices[] __initdata = { &leds_gpio, &keys_gpio, &omap_dm9000_dev, + &hsusb1_phy_device, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -625,6 +625,10 @@ static void __init devkit8000_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + /* PHY on HSUSB Port 1 i.e. index 0 */ + usb_bind_phy("ehci-omap.0", 0, "nop_usb_xceiv.1"); + usbhs_init(&usbhs_bdata); board_nand_init(devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, -- 1.7.4.1