From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH v2 07/23] ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes Date: Fri, 15 Mar 2013 17:16:28 +0200 Message-ID: <1363360604-21368-8-git-send-email-rogerq@ti.com> References: <1363360604-21368-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1363360604-21368-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, rogerq-l0cyMroinI0@public.gmane.org List-Id: devicetree@vger.kernel.org Add 2 platform devices for 'nop-usb-xceiv'. These will be used as PHYs for HS USB ports 1 and 2 so provide binding information for them. Use usbhs_init_phys() to register the PHY's RESET regulators. Signed-off-by: Roger Quadros --- arch/arm/mach-omap2/board-3630sdp.c | 48 ++++++++++++++++++++++++++++++---- 1 files changed, 42 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 67447bd..4c205e3 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -53,16 +54,37 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct platform_device hsusb1_phy_device = { + .name = "nop_usb_xceiv", + .id = 1, +}; + +/* PHY device on HS USB Port 2 i.e. nop_usb_xceiv.2 */ +static struct platform_device hsusb2_phy_device = { + .name = "nop_usb_xceiv", + .id = 2, +}; + +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 126, + .vcc_gpio = -EINVAL, + .phy_id = "nop_usb_xceiv.1", + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + .phy_id = "nop_usb_xceiv.2", + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 126, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -189,6 +211,11 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; +static struct platform_device *sdp3630_devices[] __initdata = { + &hsusb1_phy_device, + &hsusb2_phy_device, +}; + static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); @@ -199,6 +226,15 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); + + platform_add_devices(sdp3630_devices, ARRAY_SIZE(sdp3630_devices)); + + /* PHY on HSUSB Port 1 i.e. index 0 */ + usb_bind_phy("ehci-omap.0", 0, "nop_usb_xceiv.1"); + /* PHY on HSUSB Port 2 i.e. index 1 */ + usb_bind_phy("ehci-omap.0", 1, "nop_usb_xceiv.2"); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } -- 1.7.4.1