devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Venu Byravarasu <vbyravarasu@nvidia.com>
To: gregkh@linuxfoundation.org, stern@rowland.harvard.edu, balbi@ti.com
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	swarren@wwwdotorg.org, linux-tegra@vger.kernel.org,
	devicetree-discuss@lists.ozlabs.org,
	Venu Byravarasu <vbyravarasu@nvidia.com>
Subject: [PATCH 5/7] usb: phy: tegra: get ULPI reset GPIO info using DT.
Date: Mon, 18 Mar 2013 17:59:39 +0530	[thread overview]
Message-ID: <1363609781-4045-6-git-send-email-vbyravarasu@nvidia.com> (raw)
In-Reply-To: <1363609781-4045-1-git-send-email-vbyravarasu@nvidia.com>

As GPIO information is avail through DT, used it to get Tegra ULPI
reset GPIO number. Added a new member to tegra_usb_phy structure to
store this number.

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
---
 drivers/usb/phy/tegra_usb_phy.c   |   25 +++++++++++--------------
 include/linux/usb/tegra_usb_phy.h |    1 +
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c
index b5b2037..29c5ac4 100644
--- a/drivers/usb/phy/tegra_usb_phy.c
+++ b/drivers/usb/phy/tegra_usb_phy.c
@@ -541,11 +541,10 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 	int ret;
 	unsigned long val;
 	void __iomem *base = phy->regs;
-	struct tegra_ulpi_config *config = phy->config;
 
-	gpio_direction_output(config->reset_gpio, 0);
+	gpio_direction_output(phy->reset_gpio, 0);
 	msleep(5);
-	gpio_direction_output(config->reset_gpio, 1);
+	gpio_direction_output(phy->reset_gpio, 1);
 
 	clk_prepare_enable(phy->clk);
 	msleep(1);
@@ -603,10 +602,8 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 
 static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
 {
-	struct tegra_ulpi_config *config = phy->config;
-
 	clk_disable(phy->clk);
-	return gpio_direction_output(config->reset_gpio, 0);
+	return gpio_direction_output(phy->reset_gpio, 0);
 }
 
 static int	tegra_phy_init(struct usb_phy *x)
@@ -622,18 +619,18 @@ static int	tegra_phy_init(struct usb_phy *x)
 			pr_err("%s: can't get ulpi clock\n", __func__);
 			return PTR_ERR(phy->clk);
 		}
-		if (!gpio_is_valid(ulpi_config->reset_gpio))
-			ulpi_config->reset_gpio =
-				of_get_named_gpio(phy->dev->of_node,
-						  "nvidia,phy-reset-gpio", 0);
-		if (!gpio_is_valid(ulpi_config->reset_gpio)) {
+
+		phy->reset_gpio =
+			of_get_named_gpio(phy->dev->of_node,
+					  "nvidia,phy-reset-gpio", 0);
+		if (!gpio_is_valid(phy->reset_gpio)) {
 			pr_err("%s: invalid reset gpio: %d\n", __func__,
-			       ulpi_config->reset_gpio);
+			       phy->reset_gpio);
 			err = -EINVAL;
 			goto err1;
 		}
-		gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
-		gpio_direction_output(ulpi_config->reset_gpio, 0);
+		gpio_request(phy->reset_gpio, "ulpi_phy_reset_b");
+		gpio_direction_output(phy->reset_gpio, 0);
 		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
 		phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
 	} else {
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index a7af923..6cfb8f1 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -62,6 +62,7 @@ struct tegra_usb_phy {
 	struct device *dev;
 	bool is_legacy_phy;
 	bool is_ulpi_phy;
+	int reset_gpio;
 };
 
 struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
-- 
1.7.0.4

  parent reply	other threads:[~2013-03-18 12:29 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-18 12:29 [PATCH 0/7] USB: PHY: Tegra: registering TEGRA USB PHY as platform driver Venu Byravarasu
2013-03-18 12:29 ` [PATCH 3/7] usb: phy: tegra: Get PHY mode using DT Venu Byravarasu
2013-03-19 19:58   ` Stephen Warren
2013-03-20 12:24     ` Venu Byravarasu
2013-03-18 12:29 ` [PATCH 4/7] usb: phy: tegra: Return correct error value provided by clk_get_sys Venu Byravarasu
2013-03-18 12:29 ` Venu Byravarasu [this message]
     [not found]   ` <1363609781-4045-6-git-send-email-vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-18 13:01     ` [PATCH 5/7] usb: phy: tegra: get ULPI reset GPIO info using DT Sergei Shtylyov
     [not found]       ` <5147102F.1060204-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2013-03-19  4:12         ` Venu Byravarasu
2013-03-19 20:03     ` Stephen Warren
2013-03-18 12:29 ` [PATCH 6/7] usb: phy: tegra: Add error handling & clean up Venu Byravarasu
     [not found]   ` <1363609781-4045-7-git-send-email-vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-19 19:25     ` Stephen Warren
2013-03-19 20:10     ` Stephen Warren
     [not found]       ` <5148C61F.9060708-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-04-03 19:34         ` Stephen Warren
     [not found] ` <1363609781-4045-1-git-send-email-vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-18 12:29   ` [PATCH 1/7] ARM: tegra: finalize USB EHCI and PHY bindings Venu Byravarasu
     [not found]     ` <1363609781-4045-2-git-send-email-vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-20 11:19       ` kishon
2013-03-20 12:15         ` Venu Byravarasu
     [not found]           ` <D958900912E20642BCBC71664EFECE3E6E5092FFE5-QZ+emBqkIFBDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2013-03-20 17:30             ` Stephen Warren
2013-03-18 12:29   ` [PATCH 2/7] ARM: tegra: update device trees for USB binding rework Venu Byravarasu
2013-03-19 19:53     ` Stephen Warren
     [not found]       ` <5148C253.6030007-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-03-20 12:20         ` Venu Byravarasu
2013-04-03 19:38         ` Stephen Warren
     [not found]     ` <1363609781-4045-3-git-send-email-vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-20 11:23       ` kishon
     [not found]         ` <51499C29.6070405-l0cyMroinI0@public.gmane.org>
2013-03-20 12:17           ` Venu Byravarasu
     [not found]             ` <D958900912E20642BCBC71664EFECE3E6E5092FFE7-QZ+emBqkIFBDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2013-03-20 12:24               ` Felipe Balbi
2013-03-20 12:30                 ` Venu Byravarasu
2013-03-20 17:31         ` Stephen Warren
2013-03-18 12:29   ` [PATCH 7/7] usb: phy: registering tegra USB PHY as platform driver Venu Byravarasu
     [not found]     ` <1363609781-4045-8-git-send-email-vbyravarasu-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-03-19 20:21       ` Stephen Warren
     [not found]         ` <5148C8B6.90303-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-03-20 12:43           ` Venu Byravarasu
2013-03-20 17:51             ` Stephen Warren
2013-03-19 19:51   ` [PATCH 0/7] USB: PHY: Tegra: registering TEGRA " Stephen Warren
     [not found]     ` <5148C1DC.1020903-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-03-20  5:59       ` Venu Byravarasu
2013-04-03 19:47       ` Stephen Warren
2013-03-20 12:12     ` Venu Byravarasu
     [not found]       ` <D958900912E20642BCBC71664EFECE3E6E5092FFE2-QZ+emBqkIFBDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2013-03-20 17:36         ` Stephen Warren
2013-03-20 18:52           ` Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1363609781-4045-6-git-send-email-vbyravarasu@nvidia.com \
    --to=vbyravarasu@nvidia.com \
    --cc=balbi@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).