From: Ian Lartey <ian@slimlogic.co.uk>
To: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-leds@vger.kernel.org, linux-watchdog@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org, swarren@wwwdotorg.org,
grant.likely@secretlab.ca, broonie@opensource.wolfsonmicro.com,
rob.herring@calxeda.com, rob@landley.net, mturquette@linaro.org,
linus.walleij@linaro.org, cooloney@gmail.com,
sfr@canb.auug.org.au, rpurdie@rpsys.net,
akpm@linux-foundation.org, sameo@linux.intel.com, wim@iguana.be,
lgirdwood@gmail.com, gg@slimlogic.co.uk, j-keerthy@ti.com,
ldewangan@nvidia.com, t-kristo@ti.com
Subject: [PATCH v9 07/11] gpio: Palmas palmas_gpio_(read|write|update) factoring
Date: Fri, 22 Mar 2013 13:36:09 +0000 [thread overview]
Message-ID: <1363959373-10671-8-git-send-email-ian@slimlogic.co.uk> (raw)
In-Reply-To: <1363959373-10671-1-git-send-email-ian@slimlogic.co.uk>
palmas_gpio_(read|write|update) gpio parameter renamed to offset
palmas_gpio_write renamed to palmas_gpio_clear_and_set
as it no longer takes a data value instead it always sets the
offset bit and clears all other bits -
Signed-off-by: Ian Lartey <ian@slimlogic.co.uk>
---
drivers/gpio/gpio-palmas.c | 32 ++++++++++++++++----------------
1 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/gpio/gpio-palmas.c b/drivers/gpio/gpio-palmas.c
index 04da57a..689c633 100644
--- a/drivers/gpio/gpio-palmas.c
+++ b/drivers/gpio/gpio-palmas.c
@@ -32,30 +32,31 @@ struct palmas_gpio {
};
static int palmas_gpio_read(struct palmas *palmas, unsigned int reg,
- int gpio, unsigned int *dest)
+ int offset, unsigned int *dest)
{
/* registers for second bank are identical and offset by 0x9 */
- if (gpio > 7)
+ if (offset > 7)
reg += PALMAS_GPIO_DATA_IN2;
return palmas_read(palmas, PALMAS_GPIO_BASE, reg, dest);
}
-static int palmas_gpio_write(struct palmas *palmas, unsigned int reg,
- int gpio, unsigned int data)
+/* Note: This procedure sets 1 bit and clears _all_ others */
+static int palmas_gpio_clear_and_set(struct palmas *palmas, unsigned int reg,
+ int offset)
{
/* registers for second bank are identical and offset by 0x9 */
- if (gpio > 7)
+ if (offset > 7)
reg += PALMAS_GPIO_DATA_IN2;
- return palmas_write(palmas, PALMAS_GPIO_BASE, reg, data);
+ return palmas_write(palmas, PALMAS_GPIO_BASE, reg, BIT(offset % 8));
}
static int palmas_gpio_update_bits(struct palmas *palmas, unsigned int reg,
- int gpio, unsigned int mask, unsigned int data)
+ int offset, unsigned int mask, unsigned int data)
{
/* registers for second bank are identical and offset by 0x9 */
- if (gpio > 7)
+ if (offset > 7)
reg += PALMAS_GPIO_DATA_IN2;
return palmas_update_bits(palmas, PALMAS_GPIO_BASE, reg, mask, data);
@@ -89,11 +90,11 @@ static void palmas_gpio_set(struct gpio_chip *gc, unsigned offset,
int ret;
if (value)
- ret = palmas_gpio_write(palmas, PALMAS_GPIO_SET_DATA_OUT,
- offset, BIT(offset % 8));
+ ret = palmas_gpio_clear_and_set(palmas,
+ PALMAS_GPIO_SET_DATA_OUT, offset);
else
- ret = palmas_gpio_write(palmas, PALMAS_GPIO_CLEAR_DATA_OUT,
- offset, BIT(offset % 8));
+ ret = palmas_gpio_clear_and_set(palmas,
+ PALMAS_GPIO_CLEAR_DATA_OUT, offset);
if (ret < 0)
dev_err(gc->dev, "%s write failed, err = %d\n",
(value) ? "GPIO_SET_DATA_OUT" : "GPIO_CLEAR_DATA_OUT",
@@ -111,7 +112,7 @@ static int palmas_gpio_output(struct gpio_chip *gc, unsigned offset,
palmas_gpio_set(gc, offset, value);
ret = palmas_gpio_update_bits(palmas, PALMAS_GPIO_DATA_DIR,
- offset, 1 << (offset % 8), 1 << (offset % 8));
+ offset, BIT(offset % 8), BIT(offset % 8));
if (ret < 0)
dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret);
return ret;
@@ -124,7 +125,7 @@ static int palmas_gpio_input(struct gpio_chip *gc, unsigned offset)
int ret;
ret = palmas_gpio_update_bits(palmas, PALMAS_GPIO_DATA_DIR,
- offset, 1 << (offset % 8), 0);
+ offset, BIT(offset % 8), 0);
if (ret < 0)
dev_err(gc->dev, "GPIO_DATA_DIR write failed, err = %d\n", ret);
return ret;
@@ -149,7 +150,7 @@ static int palmas_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
data = 0xff;
return palmas_gpio_update_bits(palmas, PALMAS_GPIO_DEBOUNCE_EN,
- offset, 1 << (offset % 8), data);
+ offset, BIT(offset % 8), data);
}
static int palmas_gpio_probe(struct platform_device *pdev)
@@ -210,7 +211,6 @@ static int palmas_gpio_remove(struct platform_device *pdev)
static struct of_device_id of_palmas_match_tbl[] = {
{ .compatible = "ti,palmas-gpio", },
- { .compatible = "ti,palmas-charger-gpio", },
{ .compatible = "ti,twl6035-gpio", },
{ .compatible = "ti,twl6036-gpio", },
{ .compatible = "ti,twl6037-gpio", },
--
1.7.0.4
next prev parent reply other threads:[~2013-03-22 13:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 13:36 [PATCH v9 0/12] Palmas updates Ian Lartey
2013-03-22 13:36 ` [PATCH v9 01/11] mfd: palmas: is_palmas_charger needed by multiple drivers Ian Lartey
2013-03-22 13:36 ` [PATCH v9 02/11] mfd: palmas add variant and OTP detection Ian Lartey
2013-03-22 13:36 ` [PATCH v9 03/11] watchdog: add Palmas Watchdog support Ian Lartey
2013-03-22 13:36 ` [PATCH v9 04/11] watchdog: Kconfig for Palmas watchdog Ian Lartey
2013-03-22 13:36 ` [PATCH v9 05/11] gpio: palmas: add in GPIO support for palmas charger Ian Lartey
2013-03-27 13:15 ` Linus Walleij
2013-03-22 13:36 ` [PATCH v9 06/11] gpio: palmas: Enable DT support for palmas gpio Ian Lartey
2013-03-22 13:36 ` Ian Lartey [this message]
2013-03-22 13:36 ` [PATCH v9 08/11] leds: Add support for Palmas LEDs Ian Lartey
2013-03-22 14:04 ` Graeme Gregory
2013-03-22 14:08 ` Ian Lartey
2013-03-22 13:36 ` [PATCH v9 09/11] clk: add a clock driver for palmas Ian Lartey
2013-03-22 13:36 ` [PATCH v9 10/11] clk: Kconfig for Palmas clock driver Ian Lartey
2013-03-22 13:36 ` [PATCH v9 11/11] regulator: palmas remove palmas-charger option from DT bindings Ian Lartey
[not found] ` <1363959373-10671-12-git-send-email-ian-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
2013-03-25 1:16 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363959373-10671-8-git-send-email-ian@slimlogic.co.uk \
--to=ian@slimlogic.co.uk \
--cc=akpm@linux-foundation.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=cooloney@gmail.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gg@slimlogic.co.uk \
--cc=grant.likely@secretlab.ca \
--cc=j-keerthy@ti.com \
--cc=ldewangan@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=rpurdie@rpsys.net \
--cc=sameo@linux.intel.com \
--cc=sfr@canb.auug.org.au \
--cc=swarren@wwwdotorg.org \
--cc=t-kristo@ti.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).