[REPOST Patch v1 0/3] Add DT Binding for Power-Supply power-supplies property

[REPOST Patch v1 0/3] Add DT Binding for Power-Supply power-supplies property

[Rhyland Klein]

This series defines a common way for devicetree initialized
power_supplies to define their relationships between chargers and
supplicants.

This series adds a supplied_from array to complement the supplied_to
array and to allow supplies to define the list of supplies which
supply them.

Then once this property is supported, we can use a new property for
devicetree to define the relationships between nodes, and read in this
property to generate the supplied_from list.

With this logic in place, all drivers need to do to add support for
this mechanism, is to store their device tree node in the power_supply
struct. They should also handle EPROBE_DEFER properly.

Changes since:
RFC v2:
 - Changed to official Patch set rather than RFC
 - defined supplied_from char ** array rather than complicated
   struct device_node related array

RFC v1:
 - Inverted the logic so that supplies (batteries) contain a list of
   the supplies (chargers) which supply them.

Rhyland Klein (3):
  power_supply: Define Binding for power-supplies
  power: power_supply: Add core support for supplied_from
  power: power_supply_core: Add support for supplied_from

 .../bindings/power_supply/power_supply.txt         |   23 +++
 drivers/power/power_supply_core.c                  |  187 ++++++++++++++++++--
 include/linux/power_supply.h                       |    6 +
 3 files changed, 203 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power_supply/power_supply.txt

-- 
1.7.9.5

[REPOST Patch v1 1/3] power_supply: Define Binding for power-supplies

[Rhyland Klein]

This property is meant to be used in device nodes which represent
power_supply devices that wish to provide a list of supplies which
provide them power, such as a battery listing its chargers.

Signed-off-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
v1:
 - changed from RFC v2 -> patch v1
 - made poropery plural as it can be a list
 - update example with plural & changed once charger address

v2 (RFC):
 - changed property to "power-supply" which should be contained in the
   battery rather than the charger. Also updated example to match

 .../bindings/power_supply/power_supply.txt         |   23 ++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power_supply/power_supply.txt

diff --git a/Documentation/devicetree/bindings/power_supply/power_supply.txt b/Documentation/devicetree/bindings/power_supply/power_supply.txt
new file mode 100644
index 0000000..8391bfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/power_supply.txt
@@ -0,0 +1,23 @@
+Power Supply Core Support
+
+Optional Properties:
+ - power-supplies : This property is added to a supply in order to list the
+   devices which supply it power, referenced by their phandles.
+
+Example:
+
+	usb-charger: power@e {
+		compatible = "some,usb-charger";
+		...
+	};
+
+	ac-charger: power@c {
+		compatible = "some,ac-charger";
+		...
+	};
+
+	battery@b {
+		compatible = "some,battery";
+		...
+		power-supplies = <&usb-charger>, <&ac-charger>;
+	};
-- 
1.7.9.5

[REPOST Patch v1 2/3] power: power_supply: Add core support for supplied_from

[Rhyland Klein]

This patch adds support for supplies to register a list of char *'s
which represent the list of supplies which supply them. This is the
opposite as the supplied_to list.

This change maintains support for supplied_to until all drivers which
make use of it already are converted.

Signed-off-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
v1:
 - changed from RFC v2 -> patch v1
 - removed list logic and instead added supplied_from char ** array and
   num_supplies field

v2 (RFC):
 - changed from struct device_node * contained in suppliers to a list
   stored in the supplies.
 - changed logic for the is_supplied_by check to handle the entire loop
   as the array structure is difference between the 2 paths.

 drivers/power/power_supply_core.c |   49 +++++++++++++++++++++++++++----------
 include/linux/power_supply.h      |    3 +++
 2 files changed, 39 insertions(+), 13 deletions(-)

diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 5deac43..dd675ae 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -26,17 +26,44 @@ EXPORT_SYMBOL_GPL(power_supply_class);
 
 static struct device_type power_supply_dev_type;
 
+static int __power_supply_is_supplied_by(struct power_supply *supplier,
+					 struct power_supply *supply)
+{
+	int i;
+
+	if (!supply->supplied_from && !supplier->supplied_to)
+		return -EINVAL;
+
+	/* Support both supplied_to and supplied_from modes */
+	if (supply->supplied_from) {
+		for (i = 0; i < supply->num_supplies; i++) {
+			if (!supplier->name)
+				continue;
+			if (!strcmp(supplier->name, supply->supplied_from[i]))
+				return 0;
+		}
+	} else {
+		for (i = 0; i < supplier->num_supplicants; i++) {
+			if (!supply->name)
+				continue;
+			if (!strcmp(supplier->supplied_to[i], supply->name))
+				return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
 static int __power_supply_changed_work(struct device *dev, void *data)
 {
 	struct power_supply *psy = (struct power_supply *)data;
 	struct power_supply *pst = dev_get_drvdata(dev);
-	int i;
 
-	for (i = 0; i < psy->num_supplicants; i++)
-		if (!strcmp(psy->supplied_to[i], pst->name)) {
-			if (pst->external_power_changed)
-				pst->external_power_changed(pst);
-		}
+	if (__power_supply_is_supplied_by(psy, pst)) {
+		if (pst->external_power_changed)
+			pst->external_power_changed(pst);
+	}
+
 	return 0;
 }
 
@@ -68,17 +95,13 @@ static int __power_supply_am_i_supplied(struct device *dev, void *data)
 	union power_supply_propval ret = {0,};
 	struct power_supply *psy = (struct power_supply *)data;
 	struct power_supply *epsy = dev_get_drvdata(dev);
-	int i;
 
-	for (i = 0; i < epsy->num_supplicants; i++) {
-		if (!strcmp(epsy->supplied_to[i], psy->name)) {
-			if (epsy->get_property(epsy,
-				  POWER_SUPPLY_PROP_ONLINE, &ret))
-				continue;
+	if (__power_supply_is_supplied_by(epsy, psy))
+		if (!epsy->get_property(epsy, POWER_SUPPLY_PROP_ONLINE, &ret)) {
 			if (ret.intval)
 				return ret.intval;
 		}
-	}
+
 	return 0;
 }
 
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 002a99f..c1cbd5e 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -171,6 +171,9 @@ struct power_supply {
 	char **supplied_to;
 	size_t num_supplicants;
 
+	char **supplied_from;
+	size_t num_supplies;
+
 	int (*get_property)(struct power_supply *psy,
 			    enum power_supply_property psp,
 			    union power_supply_propval *val);
-- 
1.7.9.5

Re: [REPOST Patch v1 2/3] power: power_supply: Add core support for supplied_from

[Stephen Warren]

On 03/25/2013 08:24 PM, Rhyland Klein wrote:
> This patch adds support for supplies to register a list of char *'s
> which represent the list of supplies which supply them. This is the
> opposite as the supplied_to list.
> 
> This change maintains support for supplied_to until all drivers which
> make use of it already are converted.

> diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c

> +static int __power_supply_is_supplied_by(struct power_supply *supplier,
> +					 struct power_supply *supply)

Shouldn't this function return a Boolean since it's "is" something? At
least, 1 for yes 0 for no would be more comprehensible than 0 for yes
and error for no?

> +{
> +	int i;
> +
> +	if (!supply->supplied_from && !supplier->supplied_to)
> +		return -EINVAL;
> +
> +	/* Support both supplied_to and supplied_from modes */
> +	if (supply->supplied_from) {
> +		for (i = 0; i < supply->num_supplies; i++) {
> +			if (!supplier->name)
> +				continue;

That test is loop invariant. Why put it inside the loop?

Why wouldn't a supply have a name? The loop in
__power_supply_changed_work() that this function replaces doesn't test
for NULL names.

> +			if (!strcmp(supplier->name, supply->supplied_from[i]))
> +				return 0;

Don't you want to return something true here, so that the if block
inside __power_supply_changed_work() is executed in this case?

Similar comment for the else block.

>  static int __power_supply_changed_work(struct device *dev, void *data)

> -	for (i = 0; i < psy->num_supplicants; i++)
> -		if (!strcmp(psy->supplied_to[i], pst->name)) {
> -			if (pst->external_power_changed)
> -				pst->external_power_changed(pst);
> -		}
> +	if (__power_supply_is_supplied_by(psy, pst)) {
> +		if (pst->external_power_changed)
> +			pst->external_power_changed(pst);
> +	}
> +
>  	return 0;
>  }

Re: [REPOST Patch v1 2/3] power: power_supply: Add core support for supplied_from

[Rhyland Klein]

On 3/27/2013 12:30 PM, Stephen Warren wrote:
> On 03/25/2013 08:24 PM, Rhyland Klein wrote:
>> This patch adds support for supplies to register a list of char *'s
>> which represent the list of supplies which supply them. This is the
>> opposite as the supplied_to list.
>>
>> This change maintains support for supplied_to until all drivers which
>> make use of it already are converted.
> 
>> diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
> 
>> +static int __power_supply_is_supplied_by(struct power_supply *supplier,
>> +					 struct power_supply *supply)
> 
> Shouldn't this function return a Boolean since it's "is" something? At
> least, 1 for yes 0 for no would be more comprehensible than 0 for yes
> and error for no?

Yes, 1 or 0 or a boolean makes much more sense. I think this is carry
over from a previous iteration.

> 
>> +{
>> +	int i;
>> +
>> +	if (!supply->supplied_from && !supplier->supplied_to)
>> +		return -EINVAL;
>> +
>> +	/* Support both supplied_to and supplied_from modes */
>> +	if (supply->supplied_from) {
>> +		for (i = 0; i < supply->num_supplies; i++) {
>> +			if (!supplier->name)
>> +				continue;
> 
> That test is loop invariant. Why put it inside the loop?

Will move before the loop.

> 
> Why wouldn't a supply have a name? The loop in
> __power_supply_changed_work() that this function replaces doesn't test
> for NULL names.

Looking at the registration path for a power_supply, the only check that
might catch a power_supply with no name being registered is the call to
kobject_set_name. From looking into it I am not sure if would explicitly
fail if there was no name set, meaning that it would be possible for
power_supplies to not have a name. Therefore, I figured it would be
harmless to add a check here just to be sure before I accessed a
possibly NULL value.

> 
>> +			if (!strcmp(supplier->name, supply->supplied_from[i]))
>> +				return 0;
> 
> Don't you want to return something true here, so that the if block
> inside __power_supply_changed_work() is executed in this case?
> 
> Similar comment for the else block.

Yes I think switching to boolean will cleanup the return codes and make
them make more sense.

> 
>>  static int __power_supply_changed_work(struct device *dev, void *data)
> 
>> -	for (i = 0; i < psy->num_supplicants; i++)
>> -		if (!strcmp(psy->supplied_to[i], pst->name)) {
>> -			if (pst->external_power_changed)
>> -				pst->external_power_changed(pst);
>> -		}
>> +	if (__power_supply_is_supplied_by(psy, pst)) {
>> +		if (pst->external_power_changed)
>> +			pst->external_power_changed(pst);
>> +	}
>> +
>>  	return 0;
>>  }
> 

Thanks.

-rhyland

-- 
nvpublic

[REPOST Patch v1 3/3] power: power_supply_core: Add support for supplied_from

[Rhyland Klein]

Adding support for supplied_from char * array. This is meant to store the
list of suppliers for a given supply, i.e. chargers for a battery. This
list can be populated through devicetree readily as well as passed
directly from the driver.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
---
v1:
 - Changed from RFC v2 -> patch v1
 - removed list logic, added logic to first verify all supplies are
   present and defer probe until they are.
 - after all devices are registered, populate the char ** supplied_from
   array which simulates the case of dt not being used.
 - added of_node element to struct power_supply

v2 (RFC):
  - Simplified and renamed the logic to parse dt for the charger list.
  - Tied the dt parsing directly to power_supply_register to make fewer
    changes required for converting existing chargers/supplies.

 drivers/power/power_supply_core.c |  138 +++++++++++++++++++++++++++++++++++++
 include/linux/power_supply.h      |    3 +
 2 files changed, 141 insertions(+)

diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index dd675ae..c16666c 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -90,6 +90,133 @@ void power_supply_changed(struct power_supply *psy)
 }
 EXPORT_SYMBOL_GPL(power_supply_changed);
 
+#ifdef CONFIG_OF
+#include <linux/of.h>
+
+static int __power_supply_populate_supplied_from(struct device *dev,
+						 void *data)
+{
+	struct power_supply *psy = (struct power_supply *)data;
+	struct power_supply *epsy = dev_get_drvdata(dev);
+	struct device_node *np;
+	int i = 0;
+
+	do {
+		np = of_parse_phandle(psy->of_node, "power-supplies", i++);
+		if (!np)
+			continue;
+
+		if (np == epsy->of_node) {
+			dev_info(psy->dev, "%s: Found supply : %s\n",
+				psy->name, epsy->name);
+			psy->supplied_from[i-1] = (char *)epsy->name;
+			psy->num_supplies++;
+			break;
+		}
+	} while (np);
+
+	return 0;
+}
+
+int power_supply_populate_supplied_from(struct power_supply *psy)
+{
+	int error;
+
+	error = class_for_each_device(power_supply_class, NULL, psy,
+				      __power_supply_populate_supplied_from);
+
+	dev_dbg(psy->dev, "%s %d\n", __func__, error);
+
+	return error;
+}
+
+static int  __power_supply_find_supply_from_node(struct device *dev,
+						 void *data)
+{
+	struct device_node *np = (struct device_node *)data;
+	struct power_supply *epsy = dev_get_drvdata(dev);
+
+	/* return error breaks out of class_for_each_device loop */
+	if (epsy->of_node == np)
+		return -EINVAL;
+
+	return 0;
+}
+
+int power_supply_find_supply_from_node(struct device_node *supply_node)
+{
+	int error;
+	struct device *dev;
+	struct class_dev_iter iter;
+
+	/* Use iterator to see if any other device is registered.
+	 * This is required since class_for_each_device returns 0
+	 * if there are no devices registered.
+	 */
+	class_dev_iter_init(&iter, power_supply_class, NULL, NULL);
+	dev = class_dev_iter_next(&iter);
+
+	if (!dev)
+		return -EPROBE_DEFER;
+
+	/* we have to treat the return value as inverted, because if
+	 * we return error on not found, then it won't continue looking.
+	 * So we trick it by returning error on success to stop looking
+	 * once the matching device is found.
+	 */
+	error = class_for_each_device(power_supply_class, NULL, supply_node,
+				       __power_supply_find_supply_from_node);
+
+	return error ? 0 : -EPROBE_DEFER;
+}
+
+int power_supply_check_supplies(struct power_supply *psy)
+{
+	struct device_node *np;
+	int cnt = 0;
+	int ret = 0;
+
+	/* If there is already a list honor it */
+	if (psy->supplied_from && psy->num_supplies > 0)
+		return 0;
+
+	/* No device node found, nothing to do */
+	if (!psy->of_node)
+		return 0;
+
+	do {
+		np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
+		if (!np)
+			continue;
+
+		ret = power_supply_find_supply_from_node(np);
+		if (ret) {
+			dev_dbg(psy->dev, "Failed to find supply, defer!\n");
+			return -EPROBE_DEFER;
+		}
+	} while (np);
+
+	/* All supplies found, allocate char ** array for filling */
+	psy->supplied_from = devm_kzalloc(psy->dev, sizeof(psy->supplied_from),
+					  GFP_KERNEL);
+	if (!psy->supplied_from) {
+		dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
+		return -ENOMEM;
+	}
+
+	*psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * cnt,
+					   GFP_KERNEL);
+	if (!*psy->supplied_from) {
+		dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
+		return -ENOMEM;
+	}
+
+	ret = power_supply_populate_supplied_from(psy);
+
+	return ret;
+}
+#endif
+
 static int __power_supply_am_i_supplied(struct device *dev, void *data)
 {
 	union power_supply_propval ret = {0,};
@@ -359,6 +486,14 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
 
 	INIT_WORK(&psy->changed_work, power_supply_changed_work);
 
+#ifdef CONFIG_OF
+	rc = power_supply_check_supplies(psy);
+	if (rc) {
+		dev_info(dev, "Not all required supplies found, defer probe\n");
+		goto check_supplies_failed;
+	}
+#endif
+
 	rc = kobject_set_name(&dev->kobj, "%s", psy->name);
 	if (rc)
 		goto kobject_set_name_failed;
@@ -391,6 +526,9 @@ register_thermal_failed:
 	device_del(dev);
 kobject_set_name_failed:
 device_add_failed:
+#ifdef CONFIG_OF
+check_supplies_failed:
+#endif
 	put_device(dev);
 success:
 	return rc;
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index c1cbd5e..3828cef 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -173,6 +173,9 @@ struct power_supply {
 
 	char **supplied_from;
 	size_t num_supplies;
+#ifdef CONFIG_OF
+	struct device_node *of_node;
+#endif
 
 	int (*get_property)(struct power_supply *psy,
 			    enum power_supply_property psp,
-- 
1.7.9.5

Re: [REPOST Patch v1 3/3] power: power_supply_core: Add support for supplied_from

[Anton Vorontsov]

On Mon, Mar 25, 2013 at 10:24:50PM -0400, Rhyland Klein wrote:
[...]
> +int power_supply_find_supply_from_node(struct device_node *supply_node)
> +{
> +	int error;
> +	struct device *dev;
> +	struct class_dev_iter iter;
> +
> +	/* Use iterator to see if any other device is registered.
> +	 * This is required since class_for_each_device returns 0
> +	 * if there are no devices registered.
> +	 */

Minor nit: can you please adhere to the canonical style for the multiline
comments?

> +	class_dev_iter_init(&iter, power_supply_class, NULL, NULL);
> +	dev = class_dev_iter_next(&iter);
> +
> +	if (!dev)
> +		return -EPROBE_DEFER;
> +
> +	/* we have to treat the return value as inverted, because if
> +	 * we return error on not found, then it won't continue looking.
> +	 * So we trick it by returning error on success to stop looking
> +	 * once the matching device is found.
> +	 */

Ditto.

> +	error = class_for_each_device(power_supply_class, NULL, supply_node,
> +				       __power_supply_find_supply_from_node);
> +
> +	return error ? 0 : -EPROBE_DEFER;
> +}
> +
> +int power_supply_check_supplies(struct power_supply *psy)
> +{
> +	struct device_node *np;
> +	int cnt = 0;
> +	int ret = 0;
> +
> +	/* If there is already a list honor it */
> +	if (psy->supplied_from && psy->num_supplies > 0)
> +		return 0;
> +
> +	/* No device node found, nothing to do */
> +	if (!psy->of_node)
> +		return 0;
> +
> +	do {

You can move 'int ret;' here (without initializer).

> +		np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
> +		if (!np)
> +			continue;
> +
> +		ret = power_supply_find_supply_from_node(np);
> +		if (ret) {
> +			dev_dbg(psy->dev, "Failed to find supply, defer!\n");
> +			return -EPROBE_DEFER;
> +		}
> +	} while (np);
> +
> +	/* All supplies found, allocate char ** array for filling */
> +	psy->supplied_from = devm_kzalloc(psy->dev, sizeof(psy->supplied_from),
> +					  GFP_KERNEL);
> +	if (!psy->supplied_from) {
> +		dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
> +		return -ENOMEM;
> +	}
> +
> +	*psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * cnt,
> +					   GFP_KERNEL);
> +	if (!*psy->supplied_from) {
> +		dev_err(psy->dev, "Couldn't allocate memory for supply list\n");
> +		return -ENOMEM;
> +	}
> +
> +	ret = power_supply_populate_supplied_from(psy);
> +
> +	return ret;

can be just 'return power_supply_populate_supplied_from(psy);'

> +}
> +#endif
> +
>  static int __power_supply_am_i_supplied(struct device *dev, void *data)
>  {
>  	union power_supply_propval ret = {0,};
> @@ -359,6 +486,14 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
>  
>  	INIT_WORK(&psy->changed_work, power_supply_changed_work);
>  
> +#ifdef CONFIG_OF
> +	rc = power_supply_check_supplies(psy);
> +	if (rc) {
> +		dev_info(dev, "Not all required supplies found, defer probe\n");
> +		goto check_supplies_failed;
> +	}
> +#endif
[...]
> +#ifdef CONFIG_OF
> +check_supplies_failed:
> +#endif

Can you make an empty, static inline stub for
power_supply_check_supplies() for !CONFIG_OF case, so that we won't need
#ifdefs inside this function?

Otherwise it looks great, thanks a lot!

Anton