From: Vaibhav Hiremath <hvaibhav@ti.com>
To: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, b-cousson@ti.com,
mporter@ti.com, devicetree-discuss@lists.ozlabs.org,
Vaibhav Hiremath <hvaibhav@ti.com>
Subject: [PATCH 5/5] ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
Date: Wed, 27 Mar 2013 18:29:16 +0530 [thread overview]
Message-ID: <1364389156-8273-6-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1364389156-8273-1-git-send-email-hvaibhav@ti.com>
Add pin control binding for UART0 device nodes in all
board specific DT files.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
arch/arm/boot/dts/am335x-bone.dts | 10 ++++++++++
arch/arm/boot/dts/am335x-evm.dts | 10 ++++++++++
arch/arm/boot/dts/am335x-evmsk.dts | 10 ++++++++++
3 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 1d623e4..3c4c66f 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -43,10 +43,20 @@
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>;
};
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
+ 0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
+ >;
+ };
};
ocp {
uart1: serial@44e09000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 79b3cc8..89e1edd 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -58,10 +58,20 @@
0x15c 0x32 /* spi0_cs0.i2c1_scl PULLUP | INPUTENABLE | MODE2 */
>;
};
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
+ 0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
+ >;
+ };
};
ocp {
uart1: serial@44e09000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 21d5a08..0e7f1b8 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -58,10 +58,20 @@
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>;
};
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
+ 0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
+ >;
+ };
};
ocp {
uart1: serial@44e09000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
status = "okay";
};
--
1.7.0.4
next prev parent reply other threads:[~2013-03-27 12:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 12:59 [PATCH 0/5] ARM: dts: AM33XX: Cleanup and pinctrl binding support Vaibhav Hiremath
2013-03-27 12:59 ` [PATCH 1/5] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM Vaibhav Hiremath
2013-03-27 13:22 ` Peter Korsgaard
2013-03-28 5:18 ` Hiremath, Vaibhav
2013-03-27 12:59 ` [PATCH 2/5] ARM: dts: AM33XX: Add default pinctrl binding for I2C device Vaibhav Hiremath
2013-03-27 12:59 ` [PATCH 3/5] ARM: dts: AM33XX: Fix gpio numbering to match hardware/TRM Vaibhav Hiremath
2013-03-27 13:23 ` Peter Korsgaard
2013-03-27 14:11 ` Matt Porter
[not found] ` <1364389156-8273-1-git-send-email-hvaibhav-l0cyMroinI0@public.gmane.org>
2013-03-27 12:59 ` [PATCH 4/5] ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node Vaibhav Hiremath
2013-03-27 12:59 ` Vaibhav Hiremath [this message]
[not found] ` <686d89bc7b6d4bf1bc1c0524e4b586dd@DLEE51.ent.ti.com>
2013-03-27 13:28 ` [PATCH 1/5] ARM: dts: AM33XX: Fix the i2c numbering to match hardware/TRM Matt Porter
[not found] ` <a20a6c7b5b5b45328684e5afab385ae5@DFLE51.ent.ti.com>
2013-03-27 13:29 ` [PATCH 2/5] ARM: dts: AM33XX: Add default pinctrl binding for I2C device Matt Porter
[not found] ` <896a1261daec485db6be66630bc4019a@DFLE51.ent.ti.com>
2013-03-27 13:32 ` [PATCH 5/5] ARM: dts: AM33XX: Add default pinctrl binding for UART0 device Matt Porter
2013-03-28 5:17 ` Hiremath, Vaibhav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364389156-8273-6-git-send-email-hvaibhav@ti.com \
--to=hvaibhav@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mporter@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).