* [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration
@ 2013-03-28 8:08 Christoph Fritz
2013-03-28 16:38 ` Tony Lindgren
0 siblings, 1 reply; 7+ messages in thread
From: Christoph Fritz @ 2013-03-28 8:08 UTC (permalink / raw)
To: Benoît Cousson, Tony Lindgren, linux-omap,
devicetree-discuss, linux-arm-kernel
Cc: Daniel Mack, Hans J. Koch
- Fix 'function-mask' referring to TRM Section 7.4.4:
"Pad Functional Multiplexing and Configuration".
- Fix 'omap3_pmx_core' referring to TRM Table 7-4:
"Core Control Module Pad Configuration Register Fields"
- Fix 'omap3_pmx_wkup' referring to TRM Table 7-6:
"Wake-Up Control Module Pad Configuration Register Fields".
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..6ce3b5c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -27,7 +27,7 @@
};
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
@@ -77,20 +77,20 @@
omap3_pmx_core: pinmux@48002030 {
compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002030 0x05cc>;
+ reg = <0x48002030 0x234>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ pinctrl-single,function-mask = <0x7f1f>;
};
- omap3_pmx_wkup: pinmux@0x48002a58 {
+ omap3_pmx_wkup: pinmux@0x48002a00 {
compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002a58 0x5c>;
+ reg = <0x48002a00 0x54>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ pinctrl-single,function-mask = <0x7f1f>;
};
gpio1: gpio@48310000 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration
2013-03-28 8:08 [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration Christoph Fritz
@ 2013-03-28 16:38 ` Tony Lindgren
2013-03-29 9:37 ` Christoph Fritz
0 siblings, 1 reply; 7+ messages in thread
From: Tony Lindgren @ 2013-03-28 16:38 UTC (permalink / raw)
To: Christoph Fritz
Cc: Benoît Cousson, linux-omap, devicetree-discuss,
linux-arm-kernel, Daniel Mack, Hans J. Koch
* Christoph Fritz <chf.fritz@googlemail.com> [130328 01:12]:
> - Fix 'function-mask' referring to TRM Section 7.4.4:
> "Pad Functional Multiplexing and Configuration".
> - Fix 'omap3_pmx_core' referring to TRM Table 7-4:
> "Core Control Module Pad Configuration Register Fields"
> - Fix 'omap3_pmx_wkup' referring to TRM Table 7-6:
> "Wake-Up Control Module Pad Configuration Register Fields".
Maybe mention which TRM this is so people will know.
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
> arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 1acc261..6ce3b5c 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -27,7 +27,7 @@
> };
>
> /*
> - * The soc node represents the soc top level view. It is uses for IPs
> + * The soc node represents the soc top level view. It is used for IPs
> * that are not memory mapped in the MPU view or for the MPU itself.
> */
> soc {
> @@ -77,20 +77,20 @@
>
> omap3_pmx_core: pinmux@48002030 {
> compatible = "ti,omap3-padconf", "pinctrl-single";
> - reg = <0x48002030 0x05cc>;
> + reg = <0x48002030 0x234>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-single,register-width = <16>;
> - pinctrl-single,function-mask = <0x7fff>;
> + pinctrl-single,function-mask = <0x7f1f>;
> };
Changing the size from 0x5cc to 0x234 misses the range ending at
CONTROL_PADCONF_ETK_D14[31:16] 0x480025f8 that's listed at least in
the 3630 TRM. Which TRM are you looking at?
Ack for the function-mask change for omap3, looks like those bits are not
used.
> - omap3_pmx_wkup: pinmux@0x48002a58 {
> + omap3_pmx_wkup: pinmux@0x48002a00 {
> compatible = "ti,omap3-padconf", "pinctrl-single";
> - reg = <0x48002a58 0x5c>;
> + reg = <0x48002a00 0x54>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-single,register-width = <16>;
> - pinctrl-single,function-mask = <0x7fff>;
> + pinctrl-single,function-mask = <0x7f1f>;
> };
Hmm I think I converted these from the legacy mux framework, that seems
to be missing the wkup range between 0x2a00 - 0x2a58. So yes 0x2a00
is the right start as otherwise we're missing some wkup registers.
But the size should be 0x50 instead of 0x54 as the JTAG_TDO[31:16] is
already un-used in TRM?
Or it could be 0x60 if we want to map also the reserved GPIO128[31:16].
Regards,
Tony
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration
2013-03-28 16:38 ` Tony Lindgren
@ 2013-03-29 9:37 ` Christoph Fritz
2013-03-29 10:52 ` Christoph Fritz
2013-03-29 15:17 ` Tony Lindgren
0 siblings, 2 replies; 7+ messages in thread
From: Christoph Fritz @ 2013-03-29 9:37 UTC (permalink / raw)
To: Tony Lindgren
Cc: Benoît Cousson, linux-omap, devicetree-discuss,
linux-arm-kernel, Daniel Mack, Hans J. Koch
On Thu, 2013-03-28 at 09:38 -0700, Tony Lindgren wrote:
> * Christoph Fritz <chf.fritz@googlemail.com> [130328 01:12]:
> > - Fix 'function-mask' referring to TRM Section 7.4.4:
> > "Pad Functional Multiplexing and Configuration".
> > - Fix 'omap3_pmx_core' referring to TRM Table 7-4:
> > "Core Control Module Pad Configuration Register Fields"
> > - Fix 'omap3_pmx_wkup' referring to TRM Table 7-6:
> > "Wake-Up Control Module Pad Configuration Register Fields".
>
> Maybe mention which TRM this is so people will know.
>
> > Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> > ---
> > arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> > index 1acc261..6ce3b5c 100644
> > --- a/arch/arm/boot/dts/omap3.dtsi
> > +++ b/arch/arm/boot/dts/omap3.dtsi
> > @@ -27,7 +27,7 @@
> > };
> >
> > /*
> > - * The soc node represents the soc top level view. It is uses for IPs
> > + * The soc node represents the soc top level view. It is used for IPs
> > * that are not memory mapped in the MPU view or for the MPU itself.
> > */
> > soc {
> > @@ -77,20 +77,20 @@
> >
> > omap3_pmx_core: pinmux@48002030 {
> > compatible = "ti,omap3-padconf", "pinctrl-single";
> > - reg = <0x48002030 0x05cc>;
> > + reg = <0x48002030 0x234>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > pinctrl-single,register-width = <16>;
> > - pinctrl-single,function-mask = <0x7fff>;
> > + pinctrl-single,function-mask = <0x7f1f>;
> > };
>
> Changing the size from 0x5cc to 0x234 misses the range ending at
> CONTROL_PADCONF_ETK_D14[31:16] 0x480025f8 that's listed at least in
> the 3630 TRM. Which TRM are you looking at?
I used TRM Omap35xx, and yes in the TRM Omap36xx 0x234 is fine. I'll fix
this in the next revision of this patch.
> Ack for the function-mask change for omap3, looks like those bits are not
> used.
>
> > - omap3_pmx_wkup: pinmux@0x48002a58 {
> > + omap3_pmx_wkup: pinmux@0x48002a00 {
> > compatible = "ti,omap3-padconf", "pinctrl-single";
> > - reg = <0x48002a58 0x5c>;
> > + reg = <0x48002a00 0x54>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > pinctrl-single,register-width = <16>;
> > - pinctrl-single,function-mask = <0x7fff>;
> > + pinctrl-single,function-mask = <0x7f1f>;
> > };
>
> Hmm I think I converted these from the legacy mux framework, that seems
> to be missing the wkup range between 0x2a00 - 0x2a58. So yes 0x2a00
> is the right start as otherwise we're missing some wkup registers.
>
> But the size should be 0x50 instead of 0x54 as the JTAG_TDO[31:16] is
> already un-used in TRM?
>
> Or it could be 0x60 if we want to map also the reserved GPIO128[31:16].
Why not 0x5c ? GPIO128[31:16] starts at 0x2a5a and its size is 2 bytes.
Thanks
-- Christoph
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration
2013-03-29 9:37 ` Christoph Fritz
@ 2013-03-29 10:52 ` Christoph Fritz
2013-03-29 15:17 ` Tony Lindgren
1 sibling, 0 replies; 7+ messages in thread
From: Christoph Fritz @ 2013-03-29 10:52 UTC (permalink / raw)
To: Tony Lindgren
Cc: Benoît Cousson, linux-omap, devicetree-discuss,
linux-arm-kernel, Daniel Mack, Hans J. Koch
On Fri, 2013-03-29 at 10:37 +0100, Christoph Fritz wrote:
> On Thu, 2013-03-28 at 09:38 -0700, Tony Lindgren wrote:
> > * Christoph Fritz <chf.fritz@googlemail.com> [130328 01:12]:
> > > - Fix 'function-mask' referring to TRM Section 7.4.4:
> > > "Pad Functional Multiplexing and Configuration".
> > > - Fix 'omap3_pmx_core' referring to TRM Table 7-4:
> > > "Core Control Module Pad Configuration Register Fields"
> > > - Fix 'omap3_pmx_wkup' referring to TRM Table 7-6:
> > > "Wake-Up Control Module Pad Configuration Register Fields".
> >
> > Maybe mention which TRM this is so people will know.
> >
> > > Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> > > ---
> > > arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
> > > 1 file changed, 6 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> > > index 1acc261..6ce3b5c 100644
> > > --- a/arch/arm/boot/dts/omap3.dtsi
> > > +++ b/arch/arm/boot/dts/omap3.dtsi
> > > @@ -27,7 +27,7 @@
> > > };
> > >
> > > /*
> > > - * The soc node represents the soc top level view. It is uses for IPs
> > > + * The soc node represents the soc top level view. It is used for IPs
> > > * that are not memory mapped in the MPU view or for the MPU itself.
> > > */
> > > soc {
> > > @@ -77,20 +77,20 @@
> > >
> > > omap3_pmx_core: pinmux@48002030 {
> > > compatible = "ti,omap3-padconf", "pinctrl-single";
> > > - reg = <0x48002030 0x05cc>;
> > > + reg = <0x48002030 0x234>;
> > > #address-cells = <1>;
> > > #size-cells = <0>;
> > > pinctrl-single,register-width = <16>;
> > > - pinctrl-single,function-mask = <0x7fff>;
> > > + pinctrl-single,function-mask = <0x7f1f>;
> > > };
> >
> > Changing the size from 0x5cc to 0x234 misses the range ending at
> > CONTROL_PADCONF_ETK_D14[31:16] 0x480025f8 that's listed at least in
> > the 3630 TRM. Which TRM are you looking at?
>
> I used TRM Omap35xx, and yes in the TRM Omap36xx 0x234 is fine. I'll fix
> this in the next revision of this patch.
I mean 0x5cc is fine :)
>
> > Ack for the function-mask change for omap3, looks like those bits are not
> > used.
> >
> > > - omap3_pmx_wkup: pinmux@0x48002a58 {
> > > + omap3_pmx_wkup: pinmux@0x48002a00 {
> > > compatible = "ti,omap3-padconf", "pinctrl-single";
> > > - reg = <0x48002a58 0x5c>;
> > > + reg = <0x48002a00 0x54>;
> > > #address-cells = <1>;
> > > #size-cells = <0>;
> > > pinctrl-single,register-width = <16>;
> > > - pinctrl-single,function-mask = <0x7fff>;
> > > + pinctrl-single,function-mask = <0x7f1f>;
> > > };
> >
> > Hmm I think I converted these from the legacy mux framework, that seems
> > to be missing the wkup range between 0x2a00 - 0x2a58. So yes 0x2a00
> > is the right start as otherwise we're missing some wkup registers.
> >
> > But the size should be 0x50 instead of 0x54 as the JTAG_TDO[31:16] is
> > already un-used in TRM?
> >
> > Or it could be 0x60 if we want to map also the reserved GPIO128[31:16].
>
> Why not 0x5c ? GPIO128[31:16] starts at 0x2a5a and its size is 2 bytes.
>
> Thanks
> -- Christoph
>
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration
2013-03-29 9:37 ` Christoph Fritz
2013-03-29 10:52 ` Christoph Fritz
@ 2013-03-29 15:17 ` Tony Lindgren
2013-03-29 16:32 ` [PATCH v2] " Christoph Fritz
1 sibling, 1 reply; 7+ messages in thread
From: Tony Lindgren @ 2013-03-29 15:17 UTC (permalink / raw)
To: Christoph Fritz
Cc: Benoît Cousson, linux-omap, devicetree-discuss,
linux-arm-kernel, Daniel Mack, Hans J. Koch
* Christoph Fritz <chf.fritz@googlemail.com> [130329 02:41]:
> On Thu, 2013-03-28 at 09:38 -0700, Tony Lindgren wrote:
> > * Christoph Fritz <chf.fritz@googlemail.com> [130328 01:12]:
> > > - Fix 'function-mask' referring to TRM Section 7.4.4:
> > > "Pad Functional Multiplexing and Configuration".
> > > - Fix 'omap3_pmx_core' referring to TRM Table 7-4:
> > > "Core Control Module Pad Configuration Register Fields"
> > > - Fix 'omap3_pmx_wkup' referring to TRM Table 7-6:
> > > "Wake-Up Control Module Pad Configuration Register Fields".
> >
> > Maybe mention which TRM this is so people will know.
> >
> > > Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> > > ---
> > > arch/arm/boot/dts/omap3.dtsi | 12 ++++++------
> > > 1 file changed, 6 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> > > index 1acc261..6ce3b5c 100644
> > > --- a/arch/arm/boot/dts/omap3.dtsi
> > > +++ b/arch/arm/boot/dts/omap3.dtsi
> > > @@ -27,7 +27,7 @@
> > > };
> > >
> > > /*
> > > - * The soc node represents the soc top level view. It is uses for IPs
> > > + * The soc node represents the soc top level view. It is used for IPs
> > > * that are not memory mapped in the MPU view or for the MPU itself.
> > > */
> > > soc {
> > > @@ -77,20 +77,20 @@
> > >
> > > omap3_pmx_core: pinmux@48002030 {
> > > compatible = "ti,omap3-padconf", "pinctrl-single";
> > > - reg = <0x48002030 0x05cc>;
> > > + reg = <0x48002030 0x234>;
> > > #address-cells = <1>;
> > > #size-cells = <0>;
> > > pinctrl-single,register-width = <16>;
> > > - pinctrl-single,function-mask = <0x7fff>;
> > > + pinctrl-single,function-mask = <0x7f1f>;
> > > };
> >
> > Changing the size from 0x5cc to 0x234 misses the range ending at
> > CONTROL_PADCONF_ETK_D14[31:16] 0x480025f8 that's listed at least in
> > the 3630 TRM. Which TRM are you looking at?
>
> I used TRM Omap35xx, and yes in the TRM Omap36xx 0x234 is fine. I'll fix
> this in the next revision of this patch.
OK
> > Ack for the function-mask change for omap3, looks like those bits are not
> > used.
> >
> > > - omap3_pmx_wkup: pinmux@0x48002a58 {
> > > + omap3_pmx_wkup: pinmux@0x48002a00 {
> > > compatible = "ti,omap3-padconf", "pinctrl-single";
> > > - reg = <0x48002a58 0x5c>;
> > > + reg = <0x48002a00 0x54>;
> > > #address-cells = <1>;
> > > #size-cells = <0>;
> > > pinctrl-single,register-width = <16>;
> > > - pinctrl-single,function-mask = <0x7fff>;
> > > + pinctrl-single,function-mask = <0x7f1f>;
> > > };
> >
> > Hmm I think I converted these from the legacy mux framework, that seems
> > to be missing the wkup range between 0x2a00 - 0x2a58. So yes 0x2a00
> > is the right start as otherwise we're missing some wkup registers.
> >
> > But the size should be 0x50 instead of 0x54 as the JTAG_TDO[31:16] is
> > already un-used in TRM?
> >
> > Or it could be 0x60 if we want to map also the reserved GPIO128[31:16].
>
> Why not 0x5c ? GPIO128[31:16] starts at 0x2a5a and its size is 2 bytes.
Oops yes 0x5c as it's 2 bytes. So the original value is fine then.
Regards,
Tony
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH v2] arm/dts: OMAP3: fix pinctrl-single configuration
2013-03-29 15:17 ` Tony Lindgren
@ 2013-03-29 16:32 ` Christoph Fritz
2013-04-09 0:15 ` Tony Lindgren
0 siblings, 1 reply; 7+ messages in thread
From: Christoph Fritz @ 2013-03-29 16:32 UTC (permalink / raw)
To: Tony Lindgren
Cc: Benoît Cousson, linux-omap, devicetree-discuss,
linux-arm-kernel, Daniel Mack, Hans J. Koch
- Fix 'function-mask' referring to TRM (Omap 36xx) Section 13.4.4:
"Pad Functional Multiplexing and Configuration".
- Fix 'omap3_pmx_wkup' referring to TRM Table 13-6:
"Wkup Control Module Pad Configuration Register Fields".
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
---
arch/arm/boot/dts/omap3.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc261..1997b41 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -27,7 +27,7 @@
};
/*
- * The soc node represents the soc top level view. It is uses for IPs
+ * The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
@@ -81,16 +81,16 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ pinctrl-single,function-mask = <0x7f1f>;
};
- omap3_pmx_wkup: pinmux@0x48002a58 {
+ omap3_pmx_wkup: pinmux@0x48002a00 {
compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002a58 0x5c>;
+ reg = <0x48002a00 0x5c>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
+ pinctrl-single,function-mask = <0x7f1f>;
};
gpio1: gpio@48310000 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v2] arm/dts: OMAP3: fix pinctrl-single configuration
2013-03-29 16:32 ` [PATCH v2] " Christoph Fritz
@ 2013-04-09 0:15 ` Tony Lindgren
0 siblings, 0 replies; 7+ messages in thread
From: Tony Lindgren @ 2013-04-09 0:15 UTC (permalink / raw)
To: Christoph Fritz
Cc: Benoît Cousson, linux-omap, devicetree-discuss,
linux-arm-kernel, Daniel Mack, Hans J. Koch
* Christoph Fritz <chf.fritz@googlemail.com> [130329 09:36]:
> - Fix 'function-mask' referring to TRM (Omap 36xx) Section 13.4.4:
> "Pad Functional Multiplexing and Configuration".
> - Fix 'omap3_pmx_wkup' referring to TRM Table 13-6:
> "Wkup Control Module Pad Configuration Register Fields".
Thanks applying into omap-for-v3.10/dt on top of the patches
queued by Benoit.
Tony
> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
> ---
> arch/arm/boot/dts/omap3.dtsi | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 1acc261..1997b41 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -27,7 +27,7 @@
> };
>
> /*
> - * The soc node represents the soc top level view. It is uses for IPs
> + * The soc node represents the soc top level view. It is used for IPs
> * that are not memory mapped in the MPU view or for the MPU itself.
> */
> soc {
> @@ -81,16 +81,16 @@
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-single,register-width = <16>;
> - pinctrl-single,function-mask = <0x7fff>;
> + pinctrl-single,function-mask = <0x7f1f>;
> };
>
> - omap3_pmx_wkup: pinmux@0x48002a58 {
> + omap3_pmx_wkup: pinmux@0x48002a00 {
> compatible = "ti,omap3-padconf", "pinctrl-single";
> - reg = <0x48002a58 0x5c>;
> + reg = <0x48002a00 0x5c>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-single,register-width = <16>;
> - pinctrl-single,function-mask = <0x7fff>;
> + pinctrl-single,function-mask = <0x7f1f>;
> };
>
> gpio1: gpio@48310000 {
> --
> 1.7.10.4
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-04-09 0:15 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-28 8:08 [PATCH] arm/dts: OMAP3: fix pinctrl-single configuration Christoph Fritz
2013-03-28 16:38 ` Tony Lindgren
2013-03-29 9:37 ` Christoph Fritz
2013-03-29 10:52 ` Christoph Fritz
2013-03-29 15:17 ` Tony Lindgren
2013-03-29 16:32 ` [PATCH v2] " Christoph Fritz
2013-04-09 0:15 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).