[PATCH 3/6] ARM: dts: OMAP5: add device tree for ABB

[Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>]

From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>

Add DT ABB data for OMAP543x family of devices.
This data is based on OMAP543x_ES2.0_NDA_TRM_vR.pdf
document.

Cc: Mike Turquette <mturquette@linaro.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: linux-omap@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org

Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 150bff6..eb11bb7 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -74,6 +74,37 @@
 		};
 	};
 
+	abb@0x4ae07cdc {
+		compatible = "ti,omap5-abb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x4ae07cdc 0x8>,
+		      <0x4ae06014 0x4>; /* PRM_IRQSTATUS_MPU_2 */
+		operating-points = <
+				/* kHz   ABB */
+				499200  0
+				1099800 1
+				1500000 1
+				1699200 1
+		>;
+		ti,tranxdone_status_mask = <0x80>; /* (1 << 7) */
+	};
+
+	abb@0x4ae07ce4 {
+		compatible = "ti,omap5-abb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x4ae07ce4 0x8>,
+		      <0x4ae06010 0x4>; /* PRM_IRQSTATUS_MPU */
+		operating-points = <
+				/* kHz   ABB */
+				194100	0
+				388310	0
+				531200	0
+		>;
+		ti,tranxdone_status_mask = <0x80000000>; /* (1 << 31) */
+	};
+
 	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html