From: Vikas Sajjan <vikas.sajjan@linaro.org>
To: linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, sylvester.nawrocki@gmail.com,
devicetree-discuss@lists.ozlabs.org, inki.dae@samsung.com,
patches@linaro.org, linaro-kernel@lists.linaro.org
Subject: [PATCH v10 0/3] Add DRM FIMD DT support for Exynos4 DT Machines
Date: Mon, 1 Apr 2013 19:52:29 +0530 [thread overview]
Message-ID: <1364826153-8925-1-git-send-email-vikas.sajjan@linaro.org> (raw)
This patch series adds support for DRM FIMD DT for Exynos4 DT Machines,
specifically for Exynos4412 SoC.
changes since v9:
- dropped the patch "ARM: dts: Add lcd pinctrl node entries for EXYNOS4412 SoC"
as the gpios in the newly added nodes "lcd_en" and "lcd_sync" in this patch
were already PULLed high by existing "lcd_clk" node.
- addressed comments from Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
and Thomas Abraham <thomas.abraham@linaro.org>
changes since v8:
- addressed comments to add missing documentation for clock and clock-names
properties as pointed out by Sachin Kamat <sachin.kamat@linaro.org>
changes since v7:
- rebased to kgene's "for-next"
- Migrated to Common Clock Framework
- removed the patch "ARM: dts: Add FIMD AUXDATA node entry for exynos4 DT",
as migration to Common Clock Framework will NOT need this.
- addressed the comments raised by Sachin Kamat <sachin.kamat@linaro.org>
changes since v6:
- addressed comments and added interrupt-names = "fifo", "vsync", "lcd_sys"
in exynos4.dtsi and re-ordered the interrupt numbering to match the order in
interrupt combiner IP as suggested by Sylwester Nawrocki <sylvester.nawrocki@gmail.com>.
changes since v5:
- renamed the fimd binding documentation file name as "samsung-fimd.txt",
since it not only talks about exynos display controller but also about
previous samsung display controllers.
- rephrased an abmigious statement about the interrupt combiner in the
fimd binding documentation as pointed out by
Sachin Kamat <sachin.kamat@linaro.org>
changes since v4:
- moved the fimd binding documentation to Documentation/devicetree/bindings/video/
as suggested by Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
- added more fimd compatiblity strings in fimd documentation as
discussed at https://patchwork.kernel.org/patch/2144861/ with
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> and
Tomasz Figa <tomasz.figa@gmail.com>
- modified compatible string for exynos4 fimd as "exynos4210-fimd"
exynos5 fimd as "exynos5250-fimd" to stick to the rule that compatible
value should be named after first specific SoC model in which this
particular IP version was included as discussed at
https://patchwork.kernel.org/patch/2144861/
- documented more about the interrupt combiner and their order as
suggested by Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
changes since v3:
- rebased on
http://git.kernel.org/?p=linux/kernel/git/kgene/linux-samsung.git;a=shortlog;h=refs/heads/for-next-next
changes since v2:
- added alias to 'fimd@11c00000' node
(reported by: Rahul Sharma <r.sh.open@gmail.com>)
- removed 'lcd0_data' node as there was already a similar node lcd_data24
(reported by: Jingoo Han <jg1.han@samsung.com>
- replaced spaces with tabs in display-timing node
changes since v1:
- added new patch to add FIMD DT binding Documentation
- removed patch enabling SAMSUNG_DEV_BACKLIGHT and SAMSUNG_DEV_PMW
for mach-exynos4 DT
- added 'status' property to fimd DT node
Is based on branch kgene's "for-next"
https://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git/log/?h=for-next
Vikas Sajjan (3):
ARM: dts: Add FIMD node to exynos4
ARM: dts: Add FIMD node and display timing node to
exynos4412-origen.dts
ARM: dts: Add FIMD DT binding Documentation
.../devicetree/bindings/video/samsung-fimd.txt | 65 ++++++++++++++++++++
arch/arm/boot/dts/exynos4.dtsi | 12 ++++
arch/arm/boot/dts/exynos4412-origen.dts | 21 +++++++
3 files changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/samsung-fimd.txt
--
1.7.9.5
next reply other threads:[~2013-04-01 14:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-01 14:22 Vikas Sajjan [this message]
2013-04-01 14:22 ` [PATCH v10 1/3] ARM: dts: Add FIMD node to exynos4 Vikas Sajjan
2013-04-01 14:22 ` [PATCH v10 2/3] ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts Vikas Sajjan
2013-04-01 18:37 ` Sylwester Nawrocki
2013-04-01 14:22 ` [PATCH v10 3/3] ARM: dts: Add FIMD DT binding Documentation Vikas Sajjan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364826153-8925-1-git-send-email-vikas.sajjan@linaro.org \
--to=vikas.sajjan@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=inki.dae@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=sylvester.nawrocki@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).