From: Peter De Schrijver <pdeschrijver@nvidia.com>
To: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: linux-arm-kernel@lists.infradead.org,
Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Rob Landley <rob@landley.net>,
Stephen Warren <swarren@wwwdotorg.org>,
Russell King <linux@arm.linux.org.uk>,
Prashant Gaikwad <pgaikwad@nvidia.com>,
Simon Glass <sjg@chromium.org>, Rhyland Klein <rklein@nvidia.com>,
Pritesh Raithatha <praithatha@nvidia.com>,
Linus Walleij <linus.walleij@linaro.org>,
Hiroshi Doyu <hdoyu@nvidia.com>,
Laxman Dewangan <ldewangan@nvidia.com>,
Andrew Chew <achew@nvidia.com>,
Mike Turquette <mturquette@linaro.org>,
Thierry Reding <thierry.reding@avionic-design.de>,
devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v9 05/14] clk: tegra: Add PLL post divider table
Date: Wed, 3 Apr 2013 17:40:39 +0300 [thread overview]
Message-ID: <1365000110-8916-6-git-send-email-pdeschrijver@nvidia.com> (raw)
In-Reply-To: <1365000110-8916-1-git-send-email-pdeschrijver@nvidia.com>
Some PLLs in Tegra114 don't use a power of 2 mapping for the post divider.
Introduce a table based approach and switch PLLU to it.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
drivers/clk/tegra/clk-pll.c | 38 ++++++++++++++++++++++++++++++++------
drivers/clk/tegra/clk-tegra20.c | 7 +++++++
drivers/clk/tegra/clk-tegra30.c | 7 +++++++
drivers/clk/tegra/clk.h | 13 +++++++++++++
4 files changed, 59 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index eaab060..ccb367e 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -266,6 +266,7 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
unsigned long rate, unsigned long parent_rate)
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
+ struct pdiv_map *p_tohw = pll->params->pdiv_tohw;
unsigned long cfreq;
u32 p_div = 0;
@@ -299,7 +300,6 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
cfg->output_rate <<= 1)
p_div++;
- cfg->p = p_div;
cfg->m = parent_rate / cfreq;
cfg->n = cfg->output_rate / cfreq;
cfg->cpcon = OUT_OF_TABLE_CPCON;
@@ -312,8 +312,19 @@ static int _calc_rate(struct clk_hw *hw, struct tegra_clk_pll_freq_table *cfg,
return -EINVAL;
}
- if (pll->flags & TEGRA_PLLU)
- cfg->p ^= 1;
+ if (p_tohw) {
+ p_div = 1 << p_div;
+ while (p_tohw->pdiv) {
+ if (p_div <= p_tohw->pdiv) {
+ cfg->p = p_tohw->hw_val;
+ break;
+ }
+ p_tohw++;
+ }
+ if (!p_tohw->pdiv)
+ return -EINVAL;
+ } else
+ cfg->p = p_div;
return 0;
}
@@ -460,8 +471,10 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
{
struct tegra_clk_pll *pll = to_clk_pll(hw);
struct tegra_clk_pll_freq_table cfg;
+ struct pdiv_map *p_tohw = pll->params->pdiv_tohw;
u32 val;
u64 rate = parent_rate;
+ int pdiv;
val = pll_readl_base(pll);
@@ -480,10 +493,23 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
_get_pll_mnp(pll, &cfg);
- if (pll->flags & TEGRA_PLLU)
- cfg.p ^= 1;
+ if (p_tohw) {
+ while (p_tohw->pdiv) {
+ if (cfg.p == p_tohw->hw_val) {
+ pdiv = p_tohw->pdiv;
+ break;
+ }
+ p_tohw++;
+ }
+
+ if (!p_tohw->pdiv) {
+ WARN_ON(1);
+ pdiv = 1;
+ }
+ } else
+ pdiv = 1 << cfg.p;
- cfg.m *= 1 << cfg.p;
+ cfg.m *= pdiv;
rate *= cfg.n;
do_div(rate, cfg.m);
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 13efdfb..b1a49cb 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -441,6 +441,12 @@ static struct tegra_clk_pll_params pll_d_params = {
.lock_delay = 1000,
};
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
static struct tegra_clk_pll_params pll_u_params = {
.input_min = 2000000,
.input_max = 40000000,
@@ -453,6 +459,7 @@ static struct tegra_clk_pll_params pll_u_params = {
.lock_bit_idx = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
};
static struct tegra_clk_pll_params pll_x_params = {
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index a7b955c..102bcbb 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -467,6 +467,12 @@ static struct tegra_clk_pll_freq_table pll_d_freq_table[] = {
{ 0, 0, 0, 0, 0, 0 },
};
+static struct pdiv_map pllu_p[] = {
+ { .pdiv = 1, .hw_val = 1 },
+ { .pdiv = 2, .hw_val = 0 },
+ { .pdiv = 0, .hw_val = 0 },
+};
+
static struct tegra_clk_pll_freq_table pll_u_freq_table[] = {
{ 12000000, 480000000, 960, 12, 0, 12},
{ 13000000, 480000000, 960, 13, 0, 12},
@@ -640,6 +646,7 @@ static struct tegra_clk_pll_params pll_u_params = {
.lock_bit_idx = PLL_BASE_LOCK,
.lock_enable_bit_idx = PLLDU_MISC_LOCK_ENABLE,
.lock_delay = 1000,
+ .pdiv_tohw = pllu_p,
};
static struct tegra_clk_pll_params pll_x_params = {
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 17ddb22..925da45 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -117,6 +117,17 @@ struct tegra_clk_pll_freq_table {
};
/**
+ * struct pdiv_map - map post divider to hw value
+ *
+ * @pdiv: post divider
+ * @hw_val: value to be written to the PLL hw
+ */
+struct pdiv_map {
+ u8 pdiv;
+ u8 hw_val;
+};
+
+/**
* struct clk_pll_params - PLL parameters
*
* @input_min: Minimum input frequency
@@ -146,6 +157,8 @@ struct tegra_clk_pll_params {
u32 lock_bit_idx;
u32 lock_enable_bit_idx;
int lock_delay;
+ int max_p;
+ struct pdiv_map *pdiv_tohw;
};
/**
--
1.7.7.rc0.72.g4b5ea.dirty
next prev parent reply other threads:[~2013-04-03 14:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-03 14:40 [PATCH v9 00/14] Tegra114 clockframework Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 01/14] clk: tegra: provide dummy cpu car ops Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 02/14] clk: tegra: Refactor PLL programming code Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 03/14] clk: tegra: Add TEGRA_PLL_BYPASS flag Peter De Schrijver
2013-04-03 14:40 ` Peter De Schrijver [this message]
2013-04-03 14:40 ` [PATCH v9 07/14] clk: tegra: Add new fields and PLL types for Tegra114 Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 09/14] clk: tegra: Workaround for Tegra114 MSENC problem Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 11/14] clk: tegra: Implement clocks for Tegra114 Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 12/14] clk: tegra: devicetree match for nvidia,tegra114-car Peter De Schrijver
[not found] ` <1365000110-8916-13-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-04-03 18:10 ` [PATCH v9 12/14] clk: tegra: devicetree match for nvidia, tegra114-car Stephen Warren
2013-04-03 14:40 ` [PATCH v9 13/14] ARM: dt: Add references to tegra_car clocks Peter De Schrijver
2013-04-03 14:40 ` Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 14/14] clk: tegra: Remove forced clk_enable of uartd Peter De Schrijver
2013-04-03 17:52 ` [PATCH v9 00/14] Tegra114 clockframework Stephen Warren
[not found] ` <515C6C6E.6060302-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-04-03 18:27 ` Stephen Warren
[not found] ` <515C7495.8060106-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-04-03 23:23 ` Stephen Warren
[not found] ` <515CB9D9.90303-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-04-04 8:20 ` Peter De Schrijver
[not found] ` <20130404082043.GY18519-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2013-04-04 21:20 ` Mike Turquette
[not found] ` <1365000110-8916-1-git-send-email-pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-04-03 14:40 ` [PATCH v9 04/14] clk: tegra: introduce TEGRA_PLL_HAS_LOCK_ENABLE Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 06/14] clk: tegra: move from a lock bit idx to a lock mask Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 08/14] clk: tegra: Add flags to tegra_clk_periph() Peter De Schrijver
2013-04-03 14:40 ` [PATCH v9 10/14] ARM: tegra: Define Tegra114 CAR binding Peter De Schrijver
2013-04-03 17:55 ` Stephen Warren
2013-04-04 23:29 ` [PATCH v9 00/14] Tegra114 clockframework Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365000110-8916-6-git-send-email-pdeschrijver@nvidia.com \
--to=pdeschrijver@nvidia.com \
--cc=achew@nvidia.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=hdoyu@nvidia.com \
--cc=ldewangan@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=pgaikwad@nvidia.com \
--cc=praithatha@nvidia.com \
--cc=rklein@nvidia.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sjg@chromium.org \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@avionic-design.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).