From: Jon Hunter <jon-hunter@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: device-tree <devicetree-discuss@lists.ozlabs.org>,
linux-omap <linux-omap@vger.kernel.org>,
linux-arm <linux-arm-kernel@lists.infradead.org>,
Jon Hunter <jon-hunter@ti.com>
Subject: [PATCH 1/3] ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties
Date: Sun, 7 Apr 2013 20:17:06 -0500 [thread overview]
Message-ID: <1365383828-25627-1-git-send-email-jon-hunter@ti.com> (raw)
The GPMC timing properties for device-tree have been updated by adding
a "-ns" or "-ps" suffix to indicate the units of time the property
represents (as suggested by Rob Herring). Therefore, update the timing
property names for the OMAP3430 SDP NAND and ONENAND devices.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
Hi Benoit, this is a changed that is going to be introduced for v3.10.
Feel free to squash this with the patch "ARM: dts: OMAP3: Add support
for OMAP3430 SDP board" that you have queued for v3.10 if you prefer.
arch/arm/boot/dts/omap3430-sdp.dts | 56 ++++++++++++++++++------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 05cd8ba..44d2191 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -57,20 +57,20 @@
ti,nand-ecc-opt = "sw";
gpmc,device-nand;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <36>;
- gpmc,cs-wr-off = <36>;
- gpmc,adv-on = <6>;
- gpmc,adv-rd-off = <24>;
- gpmc,adv-wr-off = <36>;
- gpmc,oe-on = <6>;
- gpmc,oe-off = <48>;
- gpmc,we-on = <6>;
- gpmc,we-off = <30>;
- gpmc,rd-cycle = <72>;
- gpmc,wr-cycle = <72>;
- gpmc,access = <54>;
- gpmc,wr-access = <30>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
partition@0 {
label = "xloader-nand";
@@ -102,20 +102,20 @@
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
- gpmc,cs-on = <0>;
- gpmc,cs-rd-off = <84>;
- gpmc,cs-wr-off = <72>;
- gpmc,adv-on = <0>;
- gpmc,adv-rd-off = <18>;
- gpmc,adv-wr-off = <18>;
- gpmc,oe-on = <30>;
- gpmc,oe-off = <84>;
- gpmc,we-on = <0>;
- gpmc,we-off = <42>;
- gpmc,rd-cycle = <108>;
- gpmc,wr-cycle = <96>;
- gpmc,access = <78>;
- gpmc,wr-data-mux-bus = <30>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <84>;
+ gpmc,cs-wr-off-ns = <72>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <18>;
+ gpmc,adv-wr-off-ns = <18>;
+ gpmc,oe-on-ns = <30>;
+ gpmc,oe-off-ns = <84>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <42>;
+ gpmc,rd-cycle-ns = <108>;
+ gpmc,wr-cycle-ns = <96>;
+ gpmc,access-ns = <78>;
+ gpmc,wr-data-mux-bus-ns = <30>;
partition@0 {
label = "xloader-onenand";
--
1.7.10.4
next reply other threads:[~2013-04-08 1:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-08 1:17 Jon Hunter [this message]
2013-04-08 1:17 ` [PATCH 2/3] ARM: dts: Add NOR flash bindings for OMAP2420 H4 Jon Hunter
2013-04-08 1:17 ` [PATCH 3/3] ARM: dts: Add OMAP3430 SDP NOR flash memory binding Jon Hunter
2013-04-08 1:30 ` Jon Hunter
2013-04-08 12:12 ` [PATCH 1/3] ARM: dts: Update OMAP3430 SDP NAND and ONENAND properties Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365383828-25627-1-git-send-email-jon-hunter@ti.com \
--to=jon-hunter@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).