From: John Crispin <blogic@openwrt.org>
To: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org, devicetree-discuss@lists.ozlabs.org,
John Crispin <blogic@openwrt.org>
Subject: [PATCH 3/6] DT: MIPS: ralink: extend RT3050 dtsi and dts file
Date: Sat, 13 Apr 2013 10:50:23 +0200 [thread overview]
Message-ID: <1365843026-11015-3-git-send-email-blogic@openwrt.org> (raw)
In-Reply-To: <1365843026-11015-1-git-send-email-blogic@openwrt.org>
* remove nodes for cores whose drivers are not upstream yet
* add compat string for an additional soc
* fix a whitespace error
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/dts/rt3050.dtsi | 52 ++--------------------------------
arch/mips/ralink/dts/rt3052_eval.dts | 8 ------
2 files changed, 2 insertions(+), 58 deletions(-)
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
index 069d066..ef7da1e 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -1,7 +1,7 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
cpus {
cpu@0 {
@@ -9,10 +9,6 @@
};
};
- chosen {
- bootargs = "console=ttyS0,57600 init=/init";
- };
-
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -23,7 +19,7 @@
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
@@ -33,11 +29,6 @@
reg = <0x0 0x100>;
};
- timer@100 {
- compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
- reg = <0x100 0x100>;
- };
-
intc: intc@200 {
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
@@ -54,45 +45,6 @@
reg = <0x300 0x100>;
};
- gpio0: gpio@600 {
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
- reg = <0x600 0x34>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ralink,ngpio = <24>;
- ralink,regs = [ 00 04 08 0c
- 20 24 28 2c
- 30 34 ];
- };
-
- gpio1: gpio@638 {
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
- reg = <0x638 0x24>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ralink,ngpio = <16>;
- ralink,regs = [ 00 04 08 0c
- 10 14 18 1c
- 20 24 ];
- };
-
- gpio2: gpio@660 {
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
- reg = <0x660 0x24>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ralink,ngpio = <12>;
- ralink,regs = [ 00 04 08 0c
- 10 14 18 1c
- 20 24 ];
- };
-
uartlite@c00 {
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
index 148a590..c566c6c 100644
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -12,14 +12,6 @@
reg = <0x0 0x2000000>;
};
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmmux = "uartlite", "spi";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <0>;
- };
- };
-
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
--
1.7.10.4
next prev parent reply other threads:[~2013-04-13 8:50 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-13 8:50 [PATCH 1/6] DT: add vendor prefixes for Ralink John Crispin
2013-04-13 8:50 ` [PATCH 2/6] DT: add documentation for the Ralink MIPS SoCs John Crispin
2013-04-14 9:44 ` Gabor Juhos
2013-04-13 8:50 ` John Crispin [this message]
2013-04-13 14:49 ` [PATCH 3/6] DT: MIPS: ralink: extend RT3050 dtsi and dts file Sergei Shtylyov
2013-04-13 8:50 ` [PATCH 4/6] DT: MIPS: ralink: add RT2880 dts files John Crispin
[not found] ` <1365843026-11015-4-git-send-email-blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-04-14 9:53 ` Gabor Juhos
2013-08-23 18:34 ` Sergei Shtylyov
2013-08-23 18:37 ` Sergei Shtylyov
2013-08-23 18:44 ` David Daney
2013-04-13 8:50 ` [PATCH 5/6] DT: MIPS: ralink: add RT3883 " John Crispin
[not found] ` <1365843026-11015-5-git-send-email-blogic-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
2013-04-14 9:54 ` Gabor Juhos
2013-04-13 8:50 ` [PATCH 6/6] DT: MIPS: ralink: add MT7620 " John Crispin
2013-04-14 11:41 ` Gabor Juhos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365843026-11015-3-git-send-email-blogic@openwrt.org \
--to=blogic@openwrt.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).