[PATCH v2 0/3] ARM: EXYNOS: DT-enabled support for Universal C210

[PATCH v2 0/3] ARM: EXYNOS: DT-enabled support for Universal C210

[Tomasz Figa]

This series intends to add support for Universal C210 board using Device
Tree. Main difference from other boards based on Exynos 4210 is that
hardware revision of the SoC used on Universal C210 does not support MCT
timers and legacy PWM timers must be used instead.

First patch adds device tree node for PWM block available on Exynos4 SoCs,
second patch adds support for Exynos4210 rev0 SoC in exynos_init_time()
and third patch introduces initial device tree for Universal C210 board.

Depends on my series for PWM timers rework:
[PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support
(http://thread.gmane.org/gmane.linux.kernel.samsung-soc/17864)

On Universal C210 board:

Tested-by: Tomasz Figa <t.figa@samsung.com>

Tomasz Figa (3):
  ARM: dts: exynos4: Add node for PWM device
  ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
  ARM: dts: exynos4210: Add basic dts file for universal_c210 board

 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/exynos4.dtsi                  |   8 +
 arch/arm/boot/dts/exynos4210-universal_c210.dts | 352 ++++++++++++++++++++++++
 arch/arm/mach-exynos/common.c                   |   6 +-
 arch/arm/mach-exynos/mach-universal_c210.c      |   2 +-
 5 files changed, 367 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos4210-universal_c210.dts

-- 
1.8.1.5

[PATCH v2 1/3] ARM: dts: exynos4: Add node for PWM device

[Tomasz Figa]

This patch adds device tree node for PWM block present on Exynos 4 SoCs.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index d73eaa1..d7058c1 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -333,6 +333,14 @@
 		status = "disabled";
 	};
 
+	pwm@139D0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x139D0000 0x1000>;
+		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
1.8.1.5

Re: [PATCH v2 1/3] ARM: dts: exynos4: Add node for PWM device

[Arnd Bergmann]

On Monday 15 April 2013, Tomasz Figa wrote:
> This patch adds device tree node for PWM block present on Exynos 4 SoCs.
> 
> Signed-off-by: Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
>  arch/arm/boot/dts/exynos4.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
> index d73eaa1..d7058c1 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -333,6 +333,14 @@
>                 status = "disabled";
>         };
>  
> +       pwm@139D0000 {
> +               compatible = "samsung,exynos4210-pwm";
> +               reg = <0x139D0000 0x1000>;
> +               interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
> +               #pwm-cells = <2>;
> +               status = "disabled";
> +       };

Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>

[PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC

[Tomasz Figa]

This patch extends exynos_init_time() function to handle Exynos4210 rev0
SoC, which differs in availability of system timers and needs different
clocksource initialization.

This makes it possible to use exynos_init_time() function as init_time
callback for all Exynos-based boards, including Universal_C210, which
originally had to use samsung_timer_init().

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/mach-exynos/common.c              | 6 +++++-
 arch/arm/mach-exynos/mach-universal_c210.c | 2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index b65229d..ec596fc 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -51,6 +51,7 @@
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
 #include <plat/tv-core.h>
+#include <plat/samsung-time.h>
 #include <plat/spi-core.h>
 #include <plat/regs-serial.h>
 
@@ -457,7 +458,10 @@ void __init exynos_init_time(void)
 		exynos4_clk_init(NULL);
 		exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
 #endif
-		mct_init();
+		if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+			samsung_timer_init();
+		else
+			mct_init();
 	}
 }
 
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 020e1f4..a728812 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -1177,7 +1177,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= samsung_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END
-- 
1.8.1.5

Re: [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC

[Arnd Bergmann]

On Monday 15 April 2013, Tomasz Figa wrote:
> This patch extends exynos_init_time() function to handle Exynos4210 rev0
> SoC, which differs in availability of system timers and needs different
> clocksource initialization.
> 
> This makes it possible to use exynos_init_time() function as init_time
> callback for all Exynos-based boards, including Universal_C210, which
> originally had to use samsung_timer_init().
> 
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>

Acked-by: Arnd Bergmann <arnd@arndb.de>

Note that it would be helpful to mention here that this is required for
the calling samsung_timer_init from the exynos4-dt.c file.

	Arnd

Re: [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC

[Kukjin Kim]

On 04/23/13 06:10, Arnd Bergmann wrote:
> On Monday 15 April 2013, Tomasz Figa wrote:
>> This patch extends exynos_init_time() function to handle Exynos4210 rev0
>> SoC, which differs in availability of system timers and needs different
>> clocksource initialization.
>>
>> This makes it possible to use exynos_init_time() function as init_time
>> callback for all Exynos-based boards, including Universal_C210, which
>> originally had to use samsung_timer_init().
>>
>> Signed-off-by: Tomasz Figa<t.figa@samsung.com>
>
> Acked-by: Arnd Bergmann<arnd@arndb.de>
>
> Note that it would be helpful to mention here that this is required for
> the calling samsung_timer_init from the exynos4-dt.c file.
>
I did 'amend' as per your suggestion and added your ack on this series.

Thanks.

- Kukjin

Re: [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC

[Tomasz Figa]

Hi Kukjin,

On Tuesday 23 of April 2013 22:56:13 Kukjin Kim wrote:
> On 04/23/13 06:10, Arnd Bergmann wrote:
> > On Monday 15 April 2013, Tomasz Figa wrote:
> >> This patch extends exynos_init_time() function to handle Exynos4210 rev0
> >> SoC, which differs in availability of system timers and needs different
> >> clocksource initialization.
> >> 
> >> This makes it possible to use exynos_init_time() function as init_time
> >> callback for all Exynos-based boards, including Universal_C210, which
> >> originally had to use samsung_timer_init().
> >> 
> >> Signed-off-by: Tomasz Figa<t.figa@samsung.com>
> > 
> > Acked-by: Arnd Bergmann<arnd@arndb.de>
> > 
> > Note that it would be helpful to mention here that this is required for
> > the calling samsung_timer_init from the exynos4-dt.c file.
> 
> I did 'amend' as per your suggestion and added your ack on this series.
> 
> Thanks.
> 
> - Kukjin

Since the samsung-time rework patches were replaced with a non-invasive subset 
with different semantics (going to send them in a while), this patch should be 
replaced with new version I'm going to send (in a while as well).

Best regards,
-- 
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Kernel and System Framework

Re: [PATCH v2 2/3] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC

[Kukjin Kim]

On 04/23/13 23:26, Tomasz Figa wrote:
> Hi Kukjin,

[...]

>>> Acked-by: Arnd Bergmann<arnd@arndb.de>
>>>
>>> Note that it would be helpful to mention here that this is required for
>>> the calling samsung_timer_init from the exynos4-dt.c file.
>>
>> I did 'amend' as per your suggestion and added your ack on this series.
>>
>> Thanks.
>>
>> - Kukjin
>
> Since the samsung-time rework patches were replaced with a non-invasive subset
> with different semantics (going to send them in a while), this patch should be
> replaced with new version I'm going to send (in a while as well).
>
Oh, OK. You want to replace with new patches you will send. I dropped 
this series in my late dt branch.

BTW, the series should depend on your samsung-time patches, right?

One more note, this makes following build error.

arch/arm/mach-exynos/built-in.o: In function `exynos_init_time':
arch/arm/mach-exynos/common.c:424: undefined reference to 
`samsung_timer_init'
make: *** [vmlinux] Error 1

Thanks.

- Kukjin

[PATCH v2 3/3] ARM: dts: exynos4210: Add basic dts file for universal_c210 board

[Tomasz Figa]

This patch adds basic device tree sources for Universal C210 board.

Currently support includes:
- eMMC
- serial
- max8952 and max8998 voltage regulators.
- gpio-keys

More support will be added in further patches.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/boot/dts/Makefile                      |   1 +
 arch/arm/boot/dts/exynos4210-universal_c210.dts | 352 ++++++++++++++++++++++++
 2 files changed, 353 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4210-universal_c210.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 11fef62..95b7311 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4210-universal_c210.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-origen.dtb \
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
new file mode 100644
index 0000000..8174a7a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -0,0 +1,352 @@
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Universal C210 board which is based on
+ * Samsung's Exynos4210 EVT0 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 EVT0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210";
+
+	memory {
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+	};
+
+	mct@10050000 {
+		compatible = "none";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	vemmc_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe1 3 0>;
+		enable-active-high;
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-up-key {
+			gpios = <&gpx2 0 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <1>;
+		};
+
+		vol-down-key {
+			gpios = <&gpx2 1 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <1>;
+		};
+
+		config-key {
+			gpios = <&gpx2 2 1>;
+			linux,code = <171>;
+			label = "config";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		camera-key {
+			gpios = <&gpx2 3 1>;
+			linux,code = <212>;
+			label = "camera";
+			debounce-interval = <1>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 1>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <1>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "TSP_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 3 0>;
+		enable-active-high;
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		tsp@4a {
+			/* TBD: Atmel maXtouch touchscreen */
+			reg = <0x4a>;
+		};
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		vdd_arm_reg: pmic@60 {
+			compatible = "maxim,max8952";
+			reg = <0x60>;
+
+			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+			max8952,default-mode = <0>;
+			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+							<1050000>, <950000>;
+			max8952,sync-freq = <0>;
+			max8952,ramp-speed = <0>;
+
+			regulator-name = "vdd_arm";
+			regulator-min-microvolt = <770000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
+							<&gpx0 6 0>;
+			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+							<1100000>, <1000000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "LDO6";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD+VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "PS_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VHIC_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_I_HOST_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "CAM_S_ANA_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VCC_3.0V_LCD";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VINT_1.1V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VG3D_1.1V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "VMEM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				cp32khz_reg: EN32KHz-CP {
+					regulator-name = "32KHz CP";
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	pwm@139D0000 {
+		compatible = "samsung,s5p6440-pwm";
+		status = "okay";
+	};
+};
-- 
1.8.1.5

Re: [PATCH v2 3/3] ARM: dts: exynos4210: Add basic dts file for universal_c210 board

[Arnd Bergmann]

On Monday 15 April 2013, Tomasz Figa wrote:
> 
> This patch adds basic device tree sources for Universal C210 board.
> 
> Currently support includes:
> - eMMC
> - serial
> - max8952 and max8998 voltage regulators.
> - gpio-keys
> 
> More support will be added in further patches.
> 
> Signed-off-by: Tomasz Figa <t.figa@samsung.com>

Acked-by: Arnd Bergmann <arnd@arndb.de>

Re: [PATCH v2 0/3] ARM: EXYNOS: DT-enabled support for Universal C210

[Kukjin Kim]

On 04/15/13 23:41, Tomasz Figa wrote:
> This series intends to add support for Universal C210 board using Device
> Tree. Main difference from other boards based on Exynos 4210 is that
> hardware revision of the SoC used on Universal C210 does not support MCT
> timers and legacy PWM timers must be used instead.
>
> First patch adds device tree node for PWM block available on Exynos4 SoCs,
> second patch adds support for Exynos4210 rev0 SoC in exynos_init_time()
> and third patch introduces initial device tree for Universal C210 board.
>
> Depends on my series for PWM timers rework:
> [PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support
> (http://thread.gmane.org/gmane.linux.kernel.samsung-soc/17864)
>
> On Universal C210 board:
>
> Tested-by: Tomasz Figa<t.figa@samsung.com>
>
> Tomasz Figa (3):
>    ARM: dts: exynos4: Add node for PWM device
>    ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC
>    ARM: dts: exynos4210: Add basic dts file for universal_c210 board
>
>   arch/arm/boot/dts/Makefile                      |   1 +
>   arch/arm/boot/dts/exynos4.dtsi                  |   8 +
>   arch/arm/boot/dts/exynos4210-universal_c210.dts | 352 ++++++++++++++++++++++++
>   arch/arm/mach-exynos/common.c                   |   6 +-
>   arch/arm/mach-exynos/mach-universal_c210.c      |   2 +-
>   5 files changed, 367 insertions(+), 2 deletions(-)
>   create mode 100644 arch/arm/boot/dts/exynos4210-universal_c210.dts
>

Applied, thanks.

- Kukjin