From: Tomasz Figa <tomasz.figa@gmail.com>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org, kgene.kim@samsung.com,
broonie@opensource.wolfsonmicro.com, kwangwoo.lee@gmail.com,
jacmet@sunsite.dk, augulis.darius@gmail.com,
mcuelenaere@gmail.com, linux@arm.linux.org.uk,
Rob Herring <robherring2@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Tomasz Figa <tomasz.figa@gmail.com>
Subject: [PATCH v5 0/6] Initial Device Tree support for S3C64xx
Date: Mon, 15 Apr 2013 23:14:37 +0200 [thread overview]
Message-ID: <1366060483-20342-1-git-send-email-tomasz.figa@gmail.com> (raw)
This series adds Device Tree support for Samsung S3C64xx SoC series.
It fixes several problems preventing from booting an S3C64xx-based system
using Device Tree, adds all the infrastructure for Device Tree-based board
support, including mach-s3c64xx-dt and dts include files for S3C64xx SoCs,
and basic device tree source for FriendlyARM Mini6410 board.
Current support is very limited and allows only basic bootup with UART and
SDHCI, but should be fine as a start and will be extended in future,
hopefully with help of S3C64xx board maintainers.
This series depends on my other series reworking samsung-time for
multiplatform:
[PATCH v5 00/14] ARM: samsung-time: Prepare for multiplatform support
http://thread.gmane.org/gmane.linux.kernel.samsung-soc/17864
Changes since v4:
- Rebased onto current for-next branch of Kgene's tree
- Added support for pinctrl (driver merged through pinctrl tree)
- Added labels to all nodes that can be overridden from board dts
- Modified board dts to use the &label syntax to reference device nodes
Changes since v3:
- Rebased onto current for-next branch of Kgene's tree
- Updated timer node for next version of samsung-time patches
- Replaced local s3c64xx_dt_init_irq with irqchip_init
Changes since v2:
- Updated timer node for next version of samsung-time patches
Changes since v1:
- Dropped two VIC-related patches that are no longer necessary
- Added Device Tree-based instantation of system timers
- Corrected VIC interrupt specifiers
- Adjusted CPU compatible values and dropped @id
Tomasz Figa (6):
ARM: common: vic: Parse interrupt and resume masks from device tree
ARM: s3c64xx: Skip legacy EINT setup if pinctrl-s3c64xx driver is
present
gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx is
present
ARM: s3c64xx: Add board file for boot using Device Tree
ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs
ARM: dts: Add dts file for S3C6410-based Mini6410 board
Documentation/devicetree/bindings/arm/vic.txt | 6 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/s3c6400.dtsi | 33 ++
arch/arm/boot/dts/s3c6410-mini6410.dts | 168 +++++++
arch/arm/boot/dts/s3c6410.dtsi | 33 ++
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 683 ++++++++++++++++++++++++++
arch/arm/boot/dts/s3c64xx.dtsi | 136 +++++
arch/arm/mach-s3c64xx/Kconfig | 16 +
arch/arm/mach-s3c64xx/Makefile | 1 +
arch/arm/mach-s3c64xx/common.c | 20 +-
arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 83 ++++
drivers/gpio/gpio-samsung.c | 4 +-
drivers/irqchip/irq-vic.c | 7 +-
13 files changed, 1188 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/boot/dts/s3c6400.dtsi
create mode 100644 arch/arm/boot/dts/s3c6410-mini6410.dts
create mode 100644 arch/arm/boot/dts/s3c6410.dtsi
create mode 100644 arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/s3c64xx.dtsi
create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c
--
1.8.1.5
next reply other threads:[~2013-04-15 21:14 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-15 21:14 Tomasz Figa [this message]
2013-04-15 21:14 ` [PATCH v5 1/6] ARM: common: vic: Parse interrupt and resume masks from device tree Tomasz Figa
2013-04-15 21:14 ` [PATCH v5 2/6] ARM: s3c64xx: Skip legacy EINT setup if pinctrl-s3c64xx driver is present Tomasz Figa
2013-04-16 16:26 ` Mark Brown
2013-04-16 22:31 ` Tomasz Figa
2013-04-16 22:43 ` [PATCH v6 " Tomasz Figa
2013-04-15 21:14 ` [PATCH v5 3/6] gpio: samsung: Skip legacy GPIO registration if pinctrl-s3c64xx " Tomasz Figa
2013-04-16 16:27 ` Mark Brown
2013-04-16 22:35 ` Tomasz Figa
2013-04-17 13:06 ` Mark Brown
2013-04-23 14:33 ` Kukjin Kim
2013-04-15 21:14 ` [PATCH v5 4/6] ARM: s3c64xx: Add board file for boot using Device Tree Tomasz Figa
2013-04-15 21:14 ` [PATCH v5 5/6] ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs Tomasz Figa
2013-04-16 13:09 ` Rob Herring
2013-04-16 13:19 ` Tomasz Figa
2013-04-17 17:46 ` Rob Herring
2013-04-23 14:29 ` Kukjin Kim
2013-04-23 14:44 ` Tomasz Figa
2013-04-23 14:48 ` Kukjin Kim
2013-04-15 21:14 ` [PATCH v5 6/6] ARM: dts: Add dts file for S3C6410-based Mini6410 board Tomasz Figa
2013-04-16 16:33 ` [PATCH v5 0/6] Initial Device Tree support for S3C64xx Mark Brown
2013-04-16 22:23 ` [PATCH 1/2] pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter Tomasz Figa
2013-04-16 22:24 ` [PATCH 2/2] pinctrl: samsung: Fix link error with CONFIG_PINCTRL_EXYNOS disabled Tomasz Figa
2013-04-23 12:03 ` Linus Walleij
2013-04-23 12:09 ` Tomasz Figa
2013-04-24 14:27 ` Linus Walleij
2013-04-24 14:47 ` Tomasz Figa
2013-04-25 13:26 ` Linus Walleij
2013-04-16 22:29 ` [PATCH RESEND " Tomasz Figa
2013-04-23 12:00 ` [PATCH 1/2] pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter Linus Walleij
2013-04-17 13:08 ` [PATCH v5 0/6] Initial Device Tree support for S3C64xx Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366060483-20342-1-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa@gmail.com \
--cc=augulis.darius@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jacmet@sunsite.dk \
--cc=kgene.kim@samsung.com \
--cc=kwangwoo.lee@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mcuelenaere@gmail.com \
--cc=robherring2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).