devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
	Enric Balletbo i Serra <eballetbo@gmail.com>,
	Jon Hunter <jon-hunter@ti.com>,
	devicetree-discuss@lists.ozlabs.org,
	linux-omap <linux-omap@vger.kernel.org>,
	Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH] ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
Date: Wed, 17 Apr 2013 18:32:09 +0200	[thread overview]
Message-ID: <1366216329-10677-1-git-send-email-javier.martinez@collabora.co.uk> (raw)

The IGEPv2 board has an SMSC LAN9221i ethernet chip connected to
the OMAP3 processor though the General-Purpose Memory Controller.

This patch adds a device node for the ethernet chip as a GPMC child
and all its dependencies (regulators, GPIO and pin muxs).

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
 arch/arm/boot/dts/omap3-igep.dtsi    |    6 ++++
 arch/arm/boot/dts/omap3-igep0020.dts |   53 ++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index f8fe3b7..d5cd504 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -62,6 +62,12 @@
 			0x126 0x0100	/* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
 		>;
 	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+                        0x1a2 0x0104    /* mcspi1_cs2.gpio_176 INPUT | MODE4 */
+		>;
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e2b9849..4bac32e 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -40,6 +40,18 @@
 			gpios = <&twl_gpio 19 1>;
 		};
 	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
 };
 
 &i2c3 {
@@ -54,3 +66,44 @@
 		reg = <0x50>;
 	};
 };
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;
+	ethernet@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0 0xff>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		vmmc-supply = <&vddvario>;
+		vmmc_aux-supply = <&vdd33a>;
+		reg-io-width = <4>;
+
+		smsc,save-mac-address;
+	};
+};
-- 
1.7.7.6


             reply	other threads:[~2013-04-17 16:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-17 16:32 Javier Martinez Canillas [this message]
2013-05-08 22:37 ` [PATCH] ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support Javier Martinez Canillas
2013-05-27  8:41   ` Benoit Cousson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1366216329-10677-1-git-send-email-javier.martinez@collabora.co.uk \
    --to=javier.martinez@collabora.co.uk \
    --cc=b-cousson@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=eballetbo@gmail.com \
    --cc=jon-hunter@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).