From: Linus Walleij <linus.walleij-0IS4wlFg1OjSUeElwK9/Pw@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH 16/23] ARM: u300: support regulators in the device tree
Date: Mon, 22 Apr 2013 11:57:48 +0200 [thread overview]
Message-ID: <1366624668-6682-1-git-send-email-linus.walleij@stericsson.com> (raw)
From: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Now that we have enabled board power and the AB3100 regulators,
put the regulator data into the device tree and enable it so
we can start to tie regulators to devices. To begin with we're
only supplying the power to the board itself.
Cc: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/ste-u300.dts | 79 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 784e17a..1b3ec2d 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -24,6 +24,11 @@
reg = <0x48000000 0x03c00000>;
};
+ s365 {
+ compatible = "stericsson,s365";
+ vana15-supply = <&ab3100_ldo_d_reg>;
+ };
+
timer: timer0@c0014000 {
compatible = "stericsson,u300-apptimer";
reg = <0xc0014000 0x1000>;
@@ -70,6 +75,74 @@
interrupts = <8>;
#address-cells = <1>;
#size-cells = <0>;
+ ab3100: ab3100@0x48 {
+ compatible = "stericsson,ab3100";
+ reg = <0x48>;
+ interrupt-parent = <&vica>;
+ interrupts = <0>; /* EXT0 IRQ */
+ ab3100-regulators {
+ compatible = "stericsson,ab3100-regulators";
+ ab3100_ldo_a_reg: ab3100_ldo_a {
+ regulator-compatible = "ab3100_ldo_a";
+ startup-delay-us = <200>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ab3100_ldo_c_reg: ab3100_ldo_c {
+ regulator-compatible = "ab3100_ldo_c";
+ startup-delay-us = <200>;
+ };
+ ab3100_ldo_d_reg: ab3100_ldo_d {
+ regulator-compatible = "ab3100_ldo_d";
+ startup-delay-us = <200>;
+ };
+ ab3100_ldo_e_reg: ab3100_ldo_e {
+ regulator-compatible = "ab3100_ldo_e";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <200>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ab3100_ldo_f_reg: ab3100_ldo_f {
+ regulator-compatible = "ab3100_ldo_f";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ startup-delay-us = <600>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ ab3100_ldo_g_reg: ab3100_ldo_g {
+ regulator-compatible = "ab3100_ldo_g";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2850000>;
+ startup-delay-us = <400>;
+ };
+ ab3100_ldo_h_reg: ab3100_ldo_h {
+ regulator-compatible = "ab3100_ldo_h";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2750000>;
+ startup-delay-us = <200>;
+ };
+ ab3100_ldo_k_reg: ab3100_ldo_k {
+ regulator-compatible = "ab3100_ldo_k";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2750000>;
+ startup-delay-us = <200>;
+ };
+ ab3100_ext_reg: ab3100_ext {
+ regulator-compatible = "ab3100_ext";
+ };
+ ab3100_buck_reg: ab3100_buck {
+ regulator-compatible = "ab3100_buck";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
i2c1: i2c@c0005000 {
@@ -79,6 +152,12 @@
interrupts = <9>;
#address-cells = <1>;
#size-cells = <0>;
+ fwcam0: fwcam@0x10 {
+ reg = <0x10>;
+ };
+ fwcam1: fwcam@0x5d {
+ reg = <0x5d>;
+ };
};
amba {
--
1.7.11.3
reply other threads:[~2013-04-22 9:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366624668-6682-1-git-send-email-linus.walleij@stericsson.com \
--to=linus.walleij-0is4wlfg1ojsueelwk9/pw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).