From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
kishon-l0cyMroinI0@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
sylvester.nawrocki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
santosh.shilimkar-l0cyMroinI0@public.gmane.org,
benoit.cousson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
cesarb-PWySMVKUnqmsTnJN9+BGXg@public.gmane.org,
mchehab-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Subject: [PATCH v6 9/9] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops
Date: Mon, 29 Apr 2013 15:33:32 +0530 [thread overview]
Message-ID: <1367229812-30574-10-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1367229812-30574-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
Now that twl4030-usb is adapted to the new generic PHY framework,
*set_suspend* and *phy_init* ops can be removed from twl4030-usb driver.
Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
drivers/usb/phy/phy-twl4030-usb.c | 55 ++++++++-----------------------------
1 file changed, 12 insertions(+), 43 deletions(-)
diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c
index dacbeb1..c7a2e3b 100644
--- a/drivers/usb/phy/phy-twl4030-usb.c
+++ b/drivers/usb/phy/phy-twl4030-usb.c
@@ -422,25 +422,20 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
}
}
-static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
+static int twl4030_phy_power_off(struct phy *phy)
{
+ struct twl4030_usb *twl = dev_get_drvdata(&phy->dev);
+
if (twl->asleep)
- return;
+ return 0;
twl4030_phy_power(twl, 0);
twl->asleep = 1;
dev_dbg(twl->dev, "%s\n", __func__);
-}
-
-static int twl4030_phy_power_off(struct phy *phy)
-{
- struct twl4030_usb *twl = dev_get_drvdata(&phy->dev);
-
- twl4030_phy_suspend(twl, 0);
return 0;
}
-static void __twl4030_phy_resume(struct twl4030_usb *twl)
+static void __twl4030_phy_power_on(struct twl4030_usb *twl)
{
twl4030_phy_power(twl, 1);
twl4030_i2c_access(twl, 1);
@@ -449,11 +444,13 @@ static void __twl4030_phy_resume(struct twl4030_usb *twl)
twl4030_i2c_access(twl, 0);
}
-static void twl4030_phy_resume(struct twl4030_usb *twl)
+static int twl4030_phy_power_on(struct phy *phy)
{
+ struct twl4030_usb *twl = dev_get_drvdata(&phy->dev);
+
if (!twl->asleep)
- return;
- __twl4030_phy_resume(twl);
+ return 0;
+ __twl4030_phy_power_on(twl);
twl->asleep = 0;
dev_dbg(twl->dev, "%s\n", __func__);
@@ -466,13 +463,6 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
cancel_delayed_work(&twl->id_workaround_work);
schedule_delayed_work(&twl->id_workaround_work, HZ);
}
-}
-
-static int twl4030_phy_power_on(struct phy *phy)
-{
- struct twl4030_usb *twl = dev_get_drvdata(&phy->dev);
-
- twl4030_phy_resume(twl);
return 0;
}
@@ -604,9 +594,9 @@ static void twl4030_id_workaround_work(struct work_struct *work)
}
}
-static int twl4030_usb_phy_init(struct usb_phy *phy)
+static int twl4030_phy_init(struct phy *phy)
{
- struct twl4030_usb *twl = phy_to_twl(phy);
+ struct twl4030_usb *twl = dev_get_drvdata(&phy->dev);
enum omap_musb_vbus_id_status status;
/*
@@ -626,25 +616,6 @@ static int twl4030_usb_phy_init(struct usb_phy *phy)
return 0;
}
-static int twl4030_phy_init(struct phy *phy)
-{
- struct twl4030_usb *twl = dev_get_drvdata(&phy->dev);
-
- return twl4030_usb_phy_init(&twl->phy);
-}
-
-static int twl4030_set_suspend(struct usb_phy *x, int suspend)
-{
- struct twl4030_usb *twl = phy_to_twl(x);
-
- if (suspend)
- twl4030_phy_suspend(twl, 1);
- else
- twl4030_phy_resume(twl);
-
- return 0;
-}
-
static int twl4030_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
@@ -715,8 +686,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
twl->phy.label = "twl4030";
twl->phy.otg = otg;
twl->phy.type = USB_PHY_TYPE_USB2;
- twl->phy.set_suspend = twl4030_set_suspend;
- twl->phy.init = twl4030_usb_phy_init;
otg->phy = &twl->phy;
otg->set_host = twl4030_set_host;
--
1.7.10.4
next prev parent reply other threads:[~2013-04-29 10:03 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-29 10:03 [PATCH v6 0/9] Generic PHY Framework Kishon Vijay Abraham I
2013-04-29 10:03 ` [PATCH v6 1/9] drivers: phy: add generic PHY framework Kishon Vijay Abraham I
[not found] ` <1367229812-30574-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-05-28 22:37 ` Sylwester Nawrocki
2013-05-29 5:38 ` Kishon Vijay Abraham I
2013-06-04 10:19 ` Sylwester Nawrocki
2013-06-04 10:21 ` Sylwester Nawrocki
[not found] ` <51ADBF9B.5060403-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-04 12:26 ` Kishon Vijay Abraham I
2013-06-04 13:43 ` Sylwester Nawrocki
[not found] ` <51ADEEF6.1030200-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-06-05 5:25 ` Kishon Vijay Abraham I
2013-04-29 10:03 ` [PATCH v6 2/9] usb: phy: omap-usb2: use the new " Kishon Vijay Abraham I
[not found] ` <1367229812-30574-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-04-29 10:03 ` [PATCH v6 3/9] usb: phy: twl4030: " Kishon Vijay Abraham I
2013-04-29 10:03 ` [PATCH v6 5/9] ARM: OMAP: USB: Add phy binding information Kishon Vijay Abraham I
2013-04-29 10:03 ` [PATCH v6 8/9] usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2 Kishon Vijay Abraham I
2013-04-29 10:03 ` Kishon Vijay Abraham I [this message]
2013-04-29 10:03 ` [PATCH v6 4/9] usb: phy: twl4030: twl4030 shouldn't be subsys_initcall Kishon Vijay Abraham I
2013-04-29 10:03 ` [PATCH v6 6/9] ARM: dts: omap: update usb_otg_hs data Kishon Vijay Abraham I
2013-04-29 10:03 ` [PATCH v6 7/9] usb: musb: omap2430: use the new generic PHY framework Kishon Vijay Abraham I
2013-05-21 5:01 ` [PATCH v6 0/9] Generic PHY Framework Kishon Vijay Abraham I
2013-05-28 6:35 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1367229812-30574-10-git-send-email-kishon@ti.com \
--to=kishon-l0cymroini0@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=benoit.cousson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=cesarb-PWySMVKUnqmsTnJN9+BGXg@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mchehab-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=nsekhar-l0cyMroinI0@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=santosh.shilimkar-l0cyMroinI0@public.gmane.org \
--cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=sylvester.nawrocki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).