devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
	Jean-Francois Moine <moinejf-GANU6spQydw@public.gmane.org>,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Sebastian Hesselbarth
	<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/3] ARM: dove: add DT parsing for legacy timer
Date: Thu,  2 May 2013 20:25:39 +0200	[thread overview]
Message-ID: <1367519140-19716-3-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1367519140-19716-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

To allow to move to orion irqchip driver, existing legacy devices
have to map their irqs. This patch adds a node for orion timer and
some init code to map the corresponding irqs. While the device tree
node can stay, the init code will vanish as soon as there is true
device tree support for orion timer.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>
Cc: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>
Cc: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Cc: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Gregory Clement <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Jean-Francois Moine <moinejf-GANU6spQydw@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
---
 arch/arm/boot/dts/dove.dtsi   |    7 ++++++
 arch/arm/mach-dove/board-dt.c |   42 +++++++++++++++++++++++++++++++++++-----
 2 files changed, 43 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index ea7c5da..433cca1 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -30,6 +30,13 @@
 			marvell,tauros2-cache-features = <0>;
 		};
 
+		timer: timer {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupts = <0>;
+			clocks = <&core_clk 0>;
+		};
+
 		intc: interrupt-controller {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c
index 9df6dd7..cea65b7 100644
--- a/arch/arm/mach-dove/board-dt.c
+++ b/arch/arm/mach-dove/board-dt.c
@@ -12,6 +12,7 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/mvebu.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/usb-ehci-orion.h>
@@ -20,6 +21,7 @@
 #include <mach/pm.h>
 #include <plat/common.h>
 #include <plat/irq.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*
@@ -48,10 +50,42 @@ static void __init dove_legacy_clk_init(void)
 			 of_clk_get_from_provider(&clkspec));
 }
 
-static void __init dove_of_clk_init(void)
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+static void __init dove_legacy_timer_init(void)
 {
+	struct device_node *np = of_find_compatible_node(NULL, NULL,
+					 "marvell,orion-timer");
+	struct clk *clk;
+	void __iomem *base;
+	unsigned int tclk, irq;
+
+	/* Setup root of clk tree */
 	mvebu_clocks_init();
 	dove_legacy_clk_init();
+
+	if (!np)
+		panic("missing timer node\n");
+
+	base = of_iomap(np, 0);
+	if (!base)
+		panic("%s: missing reg base for timer\n", np->full_name);
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq)
+		panic("%s: missing irq for timer\n", np->full_name);
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk))
+		panic("%s: missing clock for timer\n", np->full_name);
+
+	clk_prepare_enable(clk);
+	tclk = clk_get_rate(clk);
+	clk_put(clk);
+
+	orion_time_set_base(base);
+	/* legacy timer init gets bridge reg base */
+	orion_time_init(base - 0x300, BRIDGE_INT_TIMER1_CLR, irq, tclk);
 }
 
 static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
@@ -95,9 +129,6 @@ static void __init dove_dt_init(void)
 #endif
 	dove_setup_cpu_mbus();
 
-	/* Setup root of clk tree */
-	dove_of_clk_init();
-
 	/* Internal devices not ported to DT yet */
 	dove_legacy_ge00_init();
 	dove_pcie_init(1, 1);
@@ -112,9 +143,8 @@ static const char * const dove_dt_board_compat[] = {
 
 DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
 	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
 	.init_irq	= orion_dt_init_irq,
-	.init_time	= dove_timer_init,
+	.init_time	= dove_legacy_timer_init,
 	.init_machine	= dove_dt_init,
 	.restart	= dove_restart,
 	.dt_compat	= dove_dt_board_compat,
-- 
1.7.2.5

  parent reply	other threads:[~2013-05-02 18:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-02 18:25 [PATCH 0/3] ARM: dove: prepare and move to orion irqchip driver Sebastian Hesselbarth
     [not found] ` <1367519140-19716-1-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-05-02 18:25   ` [PATCH 1/3] ARM: dove: add DT parsing for legacy mv643xx_eth Sebastian Hesselbarth
     [not found]     ` <1367519140-19716-2-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-05-04 18:35       ` Jason Cooper
2013-05-02 18:25   ` Sebastian Hesselbarth [this message]
     [not found]     ` <1367519140-19716-3-git-send-email-sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-05-04 18:36       ` [PATCH 2/3] ARM: dove: add DT parsing for legacy timer Jason Cooper
2013-05-02 19:19   ` [PATCH 0/3] ARM: dove: prepare and move to orion irqchip driver Jason Cooper
2013-05-02 18:25 ` [PATCH 3/3] ARM: dove: move DT boards " Sebastian Hesselbarth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1367519140-19716-3-git-send-email-sebastian.hesselbarth@gmail.com \
    --to=sebastian.hesselbarth-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=andrew-g2DYL2Zd6BY@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=moinejf-GANU6spQydw@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    --cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).