* [PATCH V2 0/2] Add DT support for tps6507x touchscreen @ 2013-05-04 11:12 Vishwanathrao Badarkhe, Manish 2013-05-04 11:12 ` [PATCH V2 1/2] tps6507x-ts: Add DT support Vishwanathrao Badarkhe, Manish 2013-05-04 11:12 ` [PATCH V2 2/2] ARM: davinci: da850: add tps6507x touchscreen DT data Vishwanathrao Badarkhe, Manish 0 siblings, 2 replies; 5+ messages in thread From: Vishwanathrao Badarkhe, Manish @ 2013-05-04 11:12 UTC (permalink / raw) To: devicetree-discuss, linux-input, linux-doc, linux-kernel, davinci-linux-open-source Cc: grant.likely, dmitry.torokhov, rob.herring, rob, manishv.b Patch set adds DT support for tps6507x based touchscreen Also, add DT data for tps6507x touchscreen in da850-evm by providing touchscreen node inside tps6507x mfd device. This patch series applies on top of linux-next tree and depends on [1]. [1]tps6507x-ts: update to devm_* API https://patchwork.kernel.org/patch/2324441/ Tested on da850-evm board. Changes since V1: - Updated tps6507x documentation. - Updated commit message. - return proper error value in absence platform and DT data for touchscreen. Vishwanathrao Badarkhe, Manish (2): tps6507x-ts: Add DT support ARM: davinci: da850: add tps6507x touchscreen DT data Documentation/devicetree/bindings/mfd/tps6507x.txt | 28 +++++- arch/arm/boot/dts/da850-evm.dts | 9 ++ drivers/input/touchscreen/tps6507x-ts.c | 105 ++++++++++++++------ 3 files changed, 111 insertions(+), 31 deletions(-) -- 1.7.4.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V2 1/2] tps6507x-ts: Add DT support 2013-05-04 11:12 [PATCH V2 0/2] Add DT support for tps6507x touchscreen Vishwanathrao Badarkhe, Manish @ 2013-05-04 11:12 ` Vishwanathrao Badarkhe, Manish 2013-05-07 5:41 ` Prabhakar Lad 2013-05-04 11:12 ` [PATCH V2 2/2] ARM: davinci: da850: add tps6507x touchscreen DT data Vishwanathrao Badarkhe, Manish 1 sibling, 1 reply; 5+ messages in thread From: Vishwanathrao Badarkhe, Manish @ 2013-05-04 11:12 UTC (permalink / raw) To: devicetree-discuss, linux-input, linux-doc, linux-kernel, davinci-linux-open-source Cc: grant.likely, dmitry.torokhov, rob.herring, rob, manishv.b Add device tree based support for TI's tps6507x touchscreen. Tested on da850-evm. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> --- Changes since V1: - Updated documetation to specify tps6507x as multifunctional device. - return proper error value in absence of platform and DT data for touchscreen. - Updated commit message. :100755 100755 8fffa3c... cf8960c... M Documentation/devicetree/bindings/mfd/tps6507x.txt :100644 100644 65e0f9a... d5433d0... M drivers/input/touchscreen/tps6507x-ts.c Documentation/devicetree/bindings/mfd/tps6507x.txt | 28 +++++- drivers/input/touchscreen/tps6507x-ts.c | 105 ++++++++++++++------ 2 files changed, 102 insertions(+), 31 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt index 8fffa3c..cf8960c 100755 --- a/Documentation/devicetree/bindings/mfd/tps6507x.txt +++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt @@ -1,4 +1,8 @@ -TPS6507x Power Management Integrated Circuit +TPS6507x Multifunctional Device. + +Features provided by TPS6507x: + 1.Power Management Integrated Circuit. + 2.Touch-Screen. Required properties: - compatible: "ti,tps6507x" @@ -23,6 +27,12 @@ Required properties: vindcdc1_2-supply: VDCDC1 and VDCDC2 input. vindcdc3-supply : VDCDC3 input. vldo1_2-supply : VLDO1 and VLDO2 input. +- tsc: This node specifies touch screen data. + ti,poll_period : Time at which touch input is getting sampled in ms. + ti,min_pressure: Minimum pressure value to trigger touch. + ti,vref : voltage reference for ADC. + 0: Reference voltage for ADC is disabled. + 1: Reference voltage for ADC is enabled. Regulator Optional properties: - defdcdc_default: It's property of DCDC2 and DCDC3 regulators. @@ -30,6 +40,14 @@ Regulator Optional properties: 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH. If this property is not defined, it defaults to 0 (not enabled). +Touchscreen Optional properties: +- ti,vendor : Touchscreen vendor id to poppulate + in sysclass interface. +- ti,product: Touchscreen product id to poppulate + in sysclass interface. +- ti,version: Touchscreen version id to poppulate + in sysclass interface. + Example: pmu: tps6507x@48 { @@ -88,4 +106,12 @@ Example: }; }; + tsc { + ti,poll_period = <30>; + ti,min_pressure = <0x30>; + ti,vref = <0>; + ti,vendor = <0>; + ti,product = <65070>; + ti,version = <0x100>; + }; }; diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c index 65e0f9a..d5433d0 100644 --- a/drivers/input/touchscreen/tps6507x-ts.c +++ b/drivers/input/touchscreen/tps6507x-ts.c @@ -21,6 +21,8 @@ #include <linux/mfd/tps6507x.h> #include <linux/input/tps6507x-ts.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_device.h> #define TSC_DEFAULT_POLL_PERIOD 30 /* ms */ #define TPS_DEFAULT_MIN_PRESSURE 0x30 @@ -231,36 +233,83 @@ done: ret = tps6507x_adc_standby(tsc); } +static int tsc_init_data(struct tps6507x_dev *tps6507x_dev, + struct input_dev *input_dev) +{ + struct device_node *node = tps6507x_dev->dev->of_node; + struct tps6507x_board *tps_board = + (struct tps6507x_board *)tps6507x_dev->dev->platform_data; + struct touchscreen_init_data *init_data = NULL; + u32 val32; + int err; + + if (node) + node = of_find_node_by_name(node, "tsc"); + if (tps_board) + init_data = tps_board->tps6507x_ts_init_data; + + if (init_data) { + tps6507x_dev->ts->poll_period = init_data->poll_period; + tps6507x_dev->ts->min_pressure = init_data->min_pressure; + tps6507x_dev->ts->vref = init_data->vref; + input_dev->id.vendor = init_data->vendor; + input_dev->id.product = init_data->product; + input_dev->id.version = init_data->version; + } else if (node) { + err = of_property_read_u32(node, "ti,poll_period", &val32); + if (err < 0) + goto error_ret; + else + tps6507x_dev->ts->poll_period = val32; + + err = of_property_read_u32(node, "ti,min_pressure", &val32); + if (err < 0) + goto error_ret; + else + tps6507x_dev->ts->min_pressure = val32; + + err = of_property_read_u32(node, "ti,vref", &val32); + if (err < 0) + goto error_ret; + else + tps6507x_dev->ts->vref = val32; + + err = of_property_read_u32(node, "ti,vendor", &val32); + if (err < 0) + goto error_ret; + else + input_dev->id.vendor = val32; + + err = of_property_read_u32(node, "ti,product", &val32); + if (err < 0) + goto error_ret; + else + input_dev->id.product = val32; + + err = of_property_read_u32(node, "ti,version", &val32); + if (err < 0) + goto error_ret; + else + input_dev->id.version = val32; + } else { + err = -EINVAL; + goto error_ret; + } + + return 0; + +error_ret: + return err; +} + static int tps6507x_ts_probe(struct platform_device *pdev) { int error; struct tps6507x_ts *tsc; struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent); - struct touchscreen_init_data *init_data; struct input_dev *input_dev; - struct tps6507x_board *tps_board; int schd; - /** - * tps_board points to pmic related constants - * coming from the board-evm file. - */ - - tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data; - - if (!tps_board) { - dev_err(tps6507x_dev->dev, - "Could not find tps6507x platform data\n"); - return -EIO; - } - - /** - * init_data points to array of regulator_init structures - * coming from the board-evm file. - */ - - init_data = tps_board->tps6507x_ts_init_data; - tsc = devm_kzalloc(&pdev->dev, sizeof(struct tps6507x_ts), GFP_KERNEL); if (!tsc) { dev_err(tps6507x_dev->dev, "failed to allocate driver data\n"); @@ -301,14 +350,10 @@ static int tps6507x_ts_probe(struct platform_device *pdev) INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler); - if (init_data) { - tsc->poll_period = init_data->poll_period; - tsc->vref = init_data->vref; - tsc->min_pressure = init_data->min_pressure; - input_dev->id.vendor = init_data->vendor; - input_dev->id.product = init_data->product; - input_dev->id.version = init_data->version; - } else { + error = tsc_init_data(tps6507x_dev, input_dev); + + if (error) { + dev_warn(&pdev->dev, "Use default platform data\n"); tsc->poll_period = TSC_DEFAULT_POLL_PERIOD; tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE; } -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH V2 1/2] tps6507x-ts: Add DT support 2013-05-04 11:12 ` [PATCH V2 1/2] tps6507x-ts: Add DT support Vishwanathrao Badarkhe, Manish @ 2013-05-07 5:41 ` Prabhakar Lad 2013-05-09 7:38 ` Vishwanathrao Badarkhe, Manish 0 siblings, 1 reply; 5+ messages in thread From: Prabhakar Lad @ 2013-05-07 5:41 UTC (permalink / raw) To: Vishwanathrao Badarkhe, Manish Cc: devicetree-discuss, linux-input, linux-doc, linux-kernel, davinci-linux-open-source, grant.likely, dmitry.torokhov, rob, rob.herring Hi Manish, Thanks for the patch, below are few nits. On Sat, May 4, 2013 at 4:42 PM, Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> wrote: > Add device tree based support for TI's tps6507x touchscreen. [Snip] > +- tsc: This node specifies touch screen data. > + ti,poll_period : Time at which touch input is getting sampled in ms. > + ti,min_pressure: Minimum pressure value to trigger touch. For devicetree properties '-' is preferred over '_'. > + ti,vref : voltage reference for ADC. > + 0: Reference voltage for ADC is disabled. > + 1: Reference voltage for ADC is enabled. > > Regulator Optional properties: > - defdcdc_default: It's property of DCDC2 and DCDC3 regulators. > @@ -30,6 +40,14 @@ Regulator Optional properties: > 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH. > If this property is not defined, it defaults to 0 (not enabled). > > +Touchscreen Optional properties: > +- ti,vendor : Touchscreen vendor id to poppulate > + in sysclass interface. > +- ti,product: Touchscreen product id to poppulate > + in sysclass interface. > +- ti,version: Touchscreen version id to poppulate > + in sysclass interface. > + s/poppulate/populate > Example: > > pmu: tps6507x@48 { > @@ -88,4 +106,12 @@ Example: > }; > }; > > + tsc { > + ti,poll_period = <30>; > + ti,min_pressure = <0x30>; > + ti,vref = <0>; > + ti,vendor = <0>; > + ti,product = <65070>; > + ti,version = <0x100>; > + }; > }; > diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c > index 65e0f9a..d5433d0 100644 > --- a/drivers/input/touchscreen/tps6507x-ts.c > +++ b/drivers/input/touchscreen/tps6507x-ts.c > @@ -21,6 +21,8 @@ > #include <linux/mfd/tps6507x.h> > #include <linux/input/tps6507x-ts.h> > #include <linux/delay.h> > +#include <linux/of.h> > +#include <linux/of_device.h> > > #define TSC_DEFAULT_POLL_PERIOD 30 /* ms */ > #define TPS_DEFAULT_MIN_PRESSURE 0x30 > @@ -231,36 +233,83 @@ done: > ret = tps6507x_adc_standby(tsc); > } > > +static int tsc_init_data(struct tps6507x_dev *tps6507x_dev, > + struct input_dev *input_dev) > +{ > + struct device_node *node = tps6507x_dev->dev->of_node; > + struct tps6507x_board *tps_board = > + (struct tps6507x_board *)tps6507x_dev->dev->platform_data; > + struct touchscreen_init_data *init_data = NULL; > + u32 val32; > + int err; > + > + if (node) > + node = of_find_node_by_name(node, "tsc"); > + if (tps_board) > + init_data = tps_board->tps6507x_ts_init_data; > + > + if (init_data) { > + tps6507x_dev->ts->poll_period = init_data->poll_period; > + tps6507x_dev->ts->min_pressure = init_data->min_pressure; > + tps6507x_dev->ts->vref = init_data->vref; > + input_dev->id.vendor = init_data->vendor; > + input_dev->id.product = init_data->product; > + input_dev->id.version = init_data->version; > + } else if (node) { > + err = of_property_read_u32(node, "ti,poll_period", &val32); why not pass tps6507x_dev->ts->poll_period instead of val32 and similarly below that would avoid else case. > + if (err < 0) > + goto error_ret; > + else > + tps6507x_dev->ts->poll_period = val32; > + > + err = of_property_read_u32(node, "ti,min_pressure", &val32); > + if (err < 0) > + goto error_ret; > + else > + tps6507x_dev->ts->min_pressure = val32; > + > + err = of_property_read_u32(node, "ti,vref", &val32); > + if (err < 0) > + goto error_ret; > + else > + tps6507x_dev->ts->vref = val32; > + > + err = of_property_read_u32(node, "ti,vendor", &val32); > + if (err < 0) > + goto error_ret; > + else > + input_dev->id.vendor = val32; > + > + err = of_property_read_u32(node, "ti,product", &val32); > + if (err < 0) > + goto error_ret; > + else > + input_dev->id.product = val32; > + > + err = of_property_read_u32(node, "ti,version", &val32); > + if (err < 0) > + goto error_ret; > + else > + input_dev->id.version = val32; > + } else { > + err = -EINVAL; > + goto error_ret; > + } you can move this check at the top when both are NULL. Regards, --Prabhakar Lad ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH V2 1/2] tps6507x-ts: Add DT support 2013-05-07 5:41 ` Prabhakar Lad @ 2013-05-09 7:38 ` Vishwanathrao Badarkhe, Manish 0 siblings, 0 replies; 5+ messages in thread From: Vishwanathrao Badarkhe, Manish @ 2013-05-09 7:38 UTC (permalink / raw) To: Prabhakar Lad Cc: devicetree-discuss@lists.ozlabs.org, linux-input@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, davinci-linux-open-source@linux.davincidsp.com, grant.likely@secretlab.ca, dmitry.torokhov@gmail.com, rob@landley.net, rob.herring@calxeda.com Hi Prabhakar, On Tue, May 07, 2013 at 11:11:21, Prabhakar Lad wrote: > Hi Manish, > > Thanks for the patch, below are few nits. > > On Sat, May 4, 2013 at 4:42 PM, Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> wrote: > > Add device tree based support for TI's tps6507x touchscreen. > [Snip] > > > +- tsc: This node specifies touch screen data. > > + ti,poll_period : Time at which touch input is getting sampled in ms. > > + ti,min_pressure: Minimum pressure value to trigger touch. > For devicetree properties '-' is preferred over '_'. Ok, I will use '-' hence forward for device tree properties. > > > + ti,vref : voltage reference for ADC. > > + 0: Reference voltage for ADC is disabled. > > + 1: Reference voltage for ADC is enabled. > > > > Regulator Optional properties: > > - defdcdc_default: It's property of DCDC2 and DCDC3 regulators. > > @@ -30,6 +40,14 @@ Regulator Optional properties: > > 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH. > > If this property is not defined, it defaults to 0 (not enabled). > > > > +Touchscreen Optional properties: > > +- ti,vendor : Touchscreen vendor id to poppulate > > + in sysclass interface. > > +- ti,product: Touchscreen product id to poppulate > > + in sysclass interface. > > +- ti,version: Touchscreen version id to poppulate > > + in sysclass interface. > > + > s/poppulate/populate Ok, I will correct this. > > > Example: > > > > pmu: tps6507x@48 { > > @@ -88,4 +106,12 @@ Example: > > }; > > }; > > > > + tsc { > > + ti,poll_period = <30>; > > + ti,min_pressure = <0x30>; > > + ti,vref = <0>; > > + ti,vendor = <0>; > > + ti,product = <65070>; > > + ti,version = <0x100>; > > + }; > > }; > > diff --git a/drivers/input/touchscreen/tps6507x-ts.c > > b/drivers/input/touchscreen/tps6507x-ts.c > > index 65e0f9a..d5433d0 100644 > > --- a/drivers/input/touchscreen/tps6507x-ts.c > > +++ b/drivers/input/touchscreen/tps6507x-ts.c > > @@ -21,6 +21,8 @@ > > #include <linux/mfd/tps6507x.h> > > #include <linux/input/tps6507x-ts.h> > > #include <linux/delay.h> > > +#include <linux/of.h> > > +#include <linux/of_device.h> > > > > #define TSC_DEFAULT_POLL_PERIOD 30 /* ms */ #define > > TPS_DEFAULT_MIN_PRESSURE 0x30 @@ -231,36 +233,83 @@ done: > > ret = tps6507x_adc_standby(tsc); } > > > > +static int tsc_init_data(struct tps6507x_dev *tps6507x_dev, > > + struct input_dev *input_dev) { > > + struct device_node *node = tps6507x_dev->dev->of_node; > > + struct tps6507x_board *tps_board = > > + (struct tps6507x_board *)tps6507x_dev->dev->platform_data; > > + struct touchscreen_init_data *init_data = NULL; > > + u32 val32; > > + int err; > > + > > + if (node) > > + node = of_find_node_by_name(node, "tsc"); > > + if (tps_board) > > + init_data = tps_board->tps6507x_ts_init_data; > > + > > + if (init_data) { > > + tps6507x_dev->ts->poll_period = init_data->poll_period; > > + tps6507x_dev->ts->min_pressure = init_data->min_pressure; > > + tps6507x_dev->ts->vref = init_data->vref; > > + input_dev->id.vendor = init_data->vendor; > > + input_dev->id.product = init_data->product; > > + input_dev->id.version = init_data->version; > > + } else if (node) { > > + err = of_property_read_u32(node, "ti,poll_period", > > + &val32); > why not pass tps6507x_dev->ts->poll_period instead of val32 and similarly below that would avoid else case. Agreed, that will reduce some code. > > > + if (err < 0) > > + goto error_ret; > > + else > > + tps6507x_dev->ts->poll_period = val32; > > + > > + err = of_property_read_u32(node, "ti,min_pressure", &val32); > > + if (err < 0) > > + goto error_ret; > > + else > > + tps6507x_dev->ts->min_pressure = val32; > > + > > + err = of_property_read_u32(node, "ti,vref", &val32); > > + if (err < 0) > > + goto error_ret; > > + else > > + tps6507x_dev->ts->vref = val32; > > + > > + err = of_property_read_u32(node, "ti,vendor", &val32); > > + if (err < 0) > > + goto error_ret; > > + else > > + input_dev->id.vendor = val32; > > + > > + err = of_property_read_u32(node, "ti,product", &val32); > > + if (err < 0) > > + goto error_ret; > > + else > > + input_dev->id.product = val32; > > + > > + err = of_property_read_u32(node, "ti,version", &val32); > > + if (err < 0) > > + goto error_ret; > > + else > > + input_dev->id.version = val32; > > + } else { > > + err = -EINVAL; > > + goto error_ret; > > + } > you can move this check at the top when both are NULL. Ok, I will move this check at the top. > > Regards, > --Prabhakar Lad > Regards, Manish ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH V2 2/2] ARM: davinci: da850: add tps6507x touchscreen DT data 2013-05-04 11:12 [PATCH V2 0/2] Add DT support for tps6507x touchscreen Vishwanathrao Badarkhe, Manish 2013-05-04 11:12 ` [PATCH V2 1/2] tps6507x-ts: Add DT support Vishwanathrao Badarkhe, Manish @ 2013-05-04 11:12 ` Vishwanathrao Badarkhe, Manish 1 sibling, 0 replies; 5+ messages in thread From: Vishwanathrao Badarkhe, Manish @ 2013-05-04 11:12 UTC (permalink / raw) To: devicetree-discuss, linux-input, linux-doc, linux-kernel, davinci-linux-open-source Cc: grant.likely, dmitry.torokhov, rob.herring, rob, manishv.b Add tps6507x touchscreen DT node to da850-evm. Touchscreen DT data is added as per da850 board file. Tested on da850-evm. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> --- Changes since V1: - Updated commit message. :100644 100644 c914357... 9c136d1... M arch/arm/boot/dts/da850-evm.dts arch/arm/boot/dts/da850-evm.dts | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index c914357..9c136d1 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -155,4 +155,13 @@ regulator-boot-on; }; }; + + tsc { + ti,poll_period = <30>; + ti,min_pressure = <0x30>; + ti,vref = <0>; + ti,vendor = <0>; + ti,product = <65070>; + ti,version = <0x100>; + }; }; -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-05-09 7:38 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-05-04 11:12 [PATCH V2 0/2] Add DT support for tps6507x touchscreen Vishwanathrao Badarkhe, Manish 2013-05-04 11:12 ` [PATCH V2 1/2] tps6507x-ts: Add DT support Vishwanathrao Badarkhe, Manish 2013-05-07 5:41 ` Prabhakar Lad 2013-05-09 7:38 ` Vishwanathrao Badarkhe, Manish 2013-05-04 11:12 ` [PATCH V2 2/2] ARM: davinci: da850: add tps6507x touchscreen DT data Vishwanathrao Badarkhe, Manish
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).