From: Vikas Sajjan <vikas.sajjan@linaro.org>
To: jg1.han@samsung.com, linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, devicetree-discuss@lists.ozlabs.org,
patches@linaro.org, linaro-kernel@lists.linaro.org
Subject: [PATCH 1/2] video: exynos_dp: Add parsing of gpios pins to exynos-dp driver
Date: Tue, 14 May 2013 18:25:51 +0530 [thread overview]
Message-ID: <1368536152-13370-2-git-send-email-vikas.sajjan@linaro.org> (raw)
In-Reply-To: <1368536152-13370-1-git-send-email-vikas.sajjan@linaro.org>
Adds GPIO parsing functionality for "LCD backlight" and "LCD enable"
GPIO pins of exynos dp controller.
Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
---
drivers/video/exynos/exynos_dp_core.c | 45 +++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index de9d4da..242a708 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <video/exynos_dp.h>
@@ -895,11 +896,51 @@ static void exynos_dp_hotplug(struct work_struct *work)
}
#ifdef CONFIG_OF
+
+static int exynos_parse_gpio(struct device *dev)
+{
+ int gpio = -1;
+ struct device_node *np = dev->of_node;
+ enum of_gpio_flags flags;
+ u32 value;
+ int ret = -1;
+
+ if (!of_find_property(np, "lcd_bl_gpio", &value)) {
+ dev_err(dev, "no bl gpio property found\n");
+ return -1;
+ }
+
+ gpio = of_get_named_gpio_flags(np, "lcd_bl_gpio", 0, &flags);
+ if (gpio_is_valid(gpio)) {
+ ret = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "exynos4-fb");
+ if (ret < 0) {
+ return ret;
+ }
+ }
+ gpio_set_value(gpio, 1);
+
+ if (!of_find_property(np, "lcd_en_gpio", &value)) {
+ dev_err(dev, "no bl gpio property found\n");
+ return -1;
+ }
+ gpio = of_get_named_gpio_flags(np, "lcd_en_gpio", 0, &flags);
+ if (gpio_is_valid(gpio)) {
+ ret = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "exynos4-fb");
+ if (ret < 0) {
+ return ret;
+ }
+ }
+ gpio_set_value(gpio, 1);
+
+ return 0;
+}
+
static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
{
struct device_node *dp_node = dev->of_node;
struct exynos_dp_platdata *pd;
struct video_info *dp_video_config;
+ int ret = -1;
pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
if (!pd) {
@@ -960,6 +1001,10 @@ static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
return ERR_PTR(-EINVAL);
}
+ ret = exynos_parse_gpio(dev);
+ if (ret != 0)
+ return NULL;
+
return pd;
}
--
1.7.9.5
next prev parent reply other threads:[~2013-05-14 12:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-14 12:55 [PATCH 0/2] Add LCD backlight and LCD enable gpios pins to dp-controller DT node Vikas Sajjan
2013-05-14 12:55 ` Vikas Sajjan [this message]
2013-05-14 14:16 ` [PATCH 1/2] video: exynos_dp: Add parsing of gpios pins to exynos-dp driver Tomasz Figa
2013-05-14 12:55 ` [PATCH 2/2] ARM: dts: Add LCD backlight and LCD enable gpios pins to dp-controller DT node Vikas Sajjan
-- strict thread matches above, loose matches on Subject: below --
2013-05-16 2:03 [PATCH 1/2] video: exynos_dp: Add parsing of gpios pins to exynos-dp driver 한진구
2013-05-17 12:29 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368536152-13370-2-git-send-email-vikas.sajjan@linaro.org \
--to=vikas.sajjan@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jg1.han@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).