[PATCH 1/1] of/documentation: Update document related to exynos_hdmi

[PATCH 1/1] of/documentation: Update document related to exynos_hdmi

[Sachin Kamat]

Exynos SoCs use pinctrl to configure GPIOs. Update the document
to reflect this change.

Signed-off-by: Sachin Kamat <sachin.kamat-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rahul Sharma <rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 .../devicetree/bindings/video/exynos_hdmi.txt      |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 589edee..584385a 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -8,9 +8,7 @@ Required properties:
 - hpd-gpio: following information about the hotplug gpio pin.
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
-	c) pin function mode.
-	d) optional flags and pull up/down.
-	e) drive strength.
+	c) optional flags and pull up/down.
 
 Example:
 
@@ -18,5 +16,5 @@ Example:
 		compatible = "samsung,exynos5-hdmi";
 		reg = <0x14530000 0x100000>;
 		interrupts = <0 95 0>;
-		hpd-gpio = <&gpx3 7 0xf 1 3>;
+		hpd-gpio = <&gpx3 7 1>;
 	};
-- 
1.7.9.5

Re: [PATCH 1/1] of/documentation: Update document related to exynos_hdmi

[Sachin Kamat]

On 20 May 2013 10:21, Sachin Kamat <sachin.kamat-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> Exynos SoCs use pinctrl to configure GPIOs. Update the document
> to reflect this change.
>
> Signed-off-by: Sachin Kamat <sachin.kamat-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Rahul Sharma <rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> ---
>  .../devicetree/bindings/video/exynos_hdmi.txt      |    6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
> index 589edee..584385a 100644
> --- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
> @@ -8,9 +8,7 @@ Required properties:
>  - hpd-gpio: following information about the hotplug gpio pin.
>         a) phandle of the gpio controller node.
>         b) pin number within the gpio controller.
> -       c) pin function mode.
> -       d) optional flags and pull up/down.
> -       e) drive strength.
> +       c) optional flags and pull up/down.
>
>  Example:
>
> @@ -18,5 +16,5 @@ Example:
>                 compatible = "samsung,exynos5-hdmi";
>                 reg = <0x14530000 0x100000>;
>                 interrupts = <0 95 0>;
> -               hpd-gpio = <&gpx3 7 0xf 1 3>;
> +               hpd-gpio = <&gpx3 7 1>;
>         };
> --
> 1.7.9.5
>

Ping..

Inki,
Would you like to take this through your tree?

-- 
With warm regards,
Sachin