From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
devicetree-discuss@lists.ozlabs.org,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Subject: [PATCH 4/7] ARM: at91: sam9x5 add udc DT support
Date: Mon, 20 May 2013 18:25:48 +0200 [thread overview]
Message-ID: <1369067151-3178-4-git-send-email-plagnioj@jcrosoft.com> (raw)
In-Reply-To: <1369067151-3178-1-git-send-email-plagnioj@jcrosoft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
---
arch/arm/boot/dts/at91sam9x5.dtsi | 62 +++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/at91sam9x5.c | 2 ++
2 files changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index af91599..01a815d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -645,6 +645,68 @@
status = "disabled";
};
+ usb2: gadget@f803c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00500000 0x80000
+ 0xf803c000 0x400>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ ep0 {
+ reg = <0>;
+ atmel,fifo-size = <64>;
+ atmel,nb-banks = <1>;
+ };
+
+ ep1 {
+ reg = <1>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep2 {
+ reg = <2>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <2>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep3 {
+ reg = <3>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep4 {
+ reg = <4>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ };
+
+ ep5 {
+ reg = <5>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+
+ ep6 {
+ reg = <6>;
+ atmel,fifo-size = <1024>;
+ atmel,nb-banks = <3>;
+ atmel,can-dma;
+ atmel,can-isoc;
+ };
+ };
+
rtc@fffffeb0 {
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x40>;
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index e631fec..2abee66 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -249,6 +249,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
};
/*
--
1.7.10.4
next prev parent reply other threads:[~2013-05-20 16:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-20 16:25 [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1369067151-3178-1-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2013-05-20 16:25 ` [PATCH 2/7] USB: gadget: atmel_usba: allow multi instance Jean-Christophe PLAGNIOL-VILLARD
2013-05-20 16:25 ` [PATCH 3/7] USB: gadget: atmel_usba: add DT support Jean-Christophe PLAGNIOL-VILLARD
2013-05-20 16:25 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-05-20 16:21 [PATCH 0/7 v4] ARM: at91: dt: add USBA support Jean-Christophe PLAGNIOL-VILLARD
2013-05-20 16:25 ` [PATCH 1/7] USB: gadget: atmel_usba: move global struct usba_ep usba_ep to struct usba_udc Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <1369067160-3230-1-git-send-email-plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
2013-05-20 16:25 ` [PATCH 4/7] ARM: at91: sam9x5 add udc DT support Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369067151-3178-4-git-send-email-plagnioj@jcrosoft.com \
--to=plagnioj@jcrosoft.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).