From: Florian Vaussard <florian.vaussard@epfl.ch>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
Stephen Warren <swarren@wwwdotorg.org>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Florian Vaussard <florian.vaussard@epfl.ch>
Subject: [PATCH 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
Date: Wed, 22 May 2013 16:27:39 +0200 [thread overview]
Message-ID: <1369232864-14460-1-git-send-email-florian.vaussard@epfl.ch> (raw)
Hello,
Following a similar proposal by Stephen Warren for tegra [1], this series
makes use of the C preprocessor when compiling OMAP DT files, and
accomplishes some improvements to improve overall readability.
Patch 2 creates a header file to define the OMAP_GPIO() macro, used by
patch 3 to make GPIOs more readable.
Likewise patch 5 uses the existing constants to make IRQs more readable.
Patch 4 is a small random fix.
This series was boot-tested on omap3-tobi. For other targets, the
decompiled .dtb were diff'ed before and after applying the series
to guarantee identity.
Best regards,
Florian
[1] https://patchwork.kernel.org/patch/2560091/
Florian Vaussard (5):
ARM: dts: OMAP2+: use #include for all device trees
ARM: dts: OMAP2+: create a DT header for GPIO
ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro
ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt
ARM: dts: OMAP4/5: use existing constants for IRQs
arch/arm/boot/dts/omap2.dtsi | 4 +-
arch/arm/boot/dts/omap2420-h4.dts | 2 +-
arch/arm/boot/dts/omap2420.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 8 +-
arch/arm/boot/dts/omap3-beagle.dts | 10 +-
arch/arm/boot/dts/omap3-devkit8000.dts | 10 +-
arch/arm/boot/dts/omap3-evm.dts | 4 +-
arch/arm/boot/dts/omap3-igep.dtsi | 4 +-
arch/arm/boot/dts/omap3-igep0020.dts | 8 +-
arch/arm/boot/dts/omap3-igep0030.dts | 4 +-
arch/arm/boot/dts/omap3-overo.dtsi | 4 +-
arch/arm/boot/dts/omap3-tobi.dts | 4 +-
arch/arm/boot/dts/omap3.dtsi | 6 +-
arch/arm/boot/dts/omap3430-sdp.dts | 4 +-
arch/arm/boot/dts/omap34xx.dtsi | 2 +-
arch/arm/boot/dts/omap36xx.dtsi | 2 +-
arch/arm/boot/dts/omap4-panda-a4.dts | 4 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 18 +-
arch/arm/boot/dts/omap4-panda-es.dts | 4 +-
arch/arm/boot/dts/omap4-panda.dts | 4 +-
arch/arm/boot/dts/omap4-sdp-es23plus.dts | 2 +-
arch/arm/boot/dts/omap4-sdp.dts | 32 ++--
arch/arm/boot/dts/omap4-var-som.dts | 8 +-
arch/arm/boot/dts/omap4.dtsi | 117 ++++++------
arch/arm/boot/dts/omap443x.dtsi | 2 +-
arch/arm/boot/dts/omap4460.dtsi | 6 +-
arch/arm/boot/dts/omap5-evm.dts | 4 +-
arch/arm/boot/dts/omap5.dtsi | 125 +++++++------
include/dt-bindings/gpio/omap-gpio.h | 289 +++++++++++++++++++++++++++++
30 files changed, 497 insertions(+), 198 deletions(-)
create mode 100644 include/dt-bindings/gpio/omap-gpio.h
--
1.7.5.4
next reply other threads:[~2013-05-22 14:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-22 14:27 Florian Vaussard [this message]
2013-05-22 14:27 ` [PATCH 1/5] ARM: dts: OMAP2+: use #include for all device trees Florian Vaussard
2013-05-22 15:40 ` Tony Lindgren
2013-05-22 16:05 ` Florian Vaussard
2013-05-22 14:27 ` [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO Florian Vaussard
2013-05-22 15:26 ` Stephen Warren
2013-05-22 15:34 ` Tony Lindgren
2013-05-22 16:00 ` Florian Vaussard
2013-05-22 16:03 ` Stephen Warren
2013-05-22 14:27 ` [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro Florian Vaussard
2013-05-22 15:28 ` Stephen Warren
2013-05-22 16:02 ` Florian Vaussard
2013-05-22 14:27 ` [PATCH 4/5] ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt Florian Vaussard
2013-05-22 15:35 ` Tony Lindgren
2013-05-22 14:27 ` [PATCH 5/5] ARM: dts: OMAP4/5: use existing constants for IRQs Florian Vaussard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369232864-14460-1-git-send-email-florian.vaussard@epfl.ch \
--to=florian.vaussard@epfl.ch \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).