From: Florian Vaussard <florian.vaussard@epfl.ch>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
Stephen Warren <swarren@wwwdotorg.org>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Florian Vaussard <florian.vaussard@epfl.ch>
Subject: [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro
Date: Wed, 22 May 2013 16:27:42 +0200 [thread overview]
Message-ID: <1369232864-14460-4-git-send-email-florian.vaussard@epfl.ch> (raw)
In-Reply-To: <1369232864-14460-1-git-send-email-florian.vaussard@epfl.ch>
Use OMAP_GPIO(), in conjunction with standard GPIO flags, to enhance the
readability of DT GPIOs.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
arch/arm/boot/dts/omap2.dtsi | 2 ++
arch/arm/boot/dts/omap3-beagle-xm.dts | 4 ++--
arch/arm/boot/dts/omap3-beagle.dts | 6 +++---
arch/arm/boot/dts/omap3-devkit8000.dts | 6 +++---
arch/arm/boot/dts/omap3-igep0020.dts | 6 +++---
arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
arch/arm/boot/dts/omap3-tobi.dts | 2 +-
arch/arm/boot/dts/omap3.dtsi | 2 ++
arch/arm/boot/dts/omap4-panda-common.dtsi | 6 +++---
arch/arm/boot/dts/omap4-sdp.dts | 20 ++++++++++----------
arch/arm/boot/dts/omap4.dtsi | 2 ++
arch/arm/boot/dts/omap5.dtsi | 2 ++
12 files changed, 34 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index e6e4587..7ea5df4 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/omap-gpio.h>
+
#include "skeleton.dtsi"
/ {
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index e0ce823..e773a5e 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -29,13 +29,13 @@
heartbeat {
label = "beagleboard::usr0";
- gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ gpios = OMAP_GPIO(150, GPIO_ACTIVE_HIGH); /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};
mmc {
label = "beagleboard::usr1";
- gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ gpios = OMAP_GPIO(149, GPIO_ACTIVE_HIGH); /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index fcac96a..f1fd002 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -33,13 +33,13 @@
heartbeat {
label = "beagleboard::usr0";
- gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+ gpios = OMAP_GPIO(150, GPIO_ACTIVE_HIGH); /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};
mmc {
label = "beagleboard::usr1";
- gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+ gpios = OMAP_GPIO(149, GPIO_ACTIVE_HIGH); /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
};
};
@@ -50,7 +50,7 @@
regulator-name = "hsusb2_reset";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 19 0>; /* gpio_147 */
+ gpio = OMAP_GPIO(147, GPIO_ACTIVE_HIGH);
startup-delay-us = <70000>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 8d0f5e4..fecb5ac 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -22,21 +22,21 @@
heartbeat {
label = "devkit8000::led1";
- gpios = <&gpio6 26 0>; /* 186 -> LED1 */
+ gpios = OMAP_GPIO(186, GPIO_ACTIVE_HIGH); /* 186 -> LED1 */
default-state = "on";
linux,default-trigger = "heartbeat";
};
mmc {
label = "devkit8000::led2";
- gpios = <&gpio6 3 0>; /* 163 -> LED2 */
+ gpios = OMAP_GPIO(163, GPIO_ACTIVE_HIGH); /* 163 -> LED2 */
default-state = "on";
linux,default-trigger = "none";
};
usr {
label = "devkit8000::led3";
- gpios = <&gpio6 4 0>; /* 164 -> LED3 */
+ gpios = OMAP_GPIO(164, GPIO_ACTIVE_HIGH); /* 164 -> LED3 */
default-state = "on";
linux,default-trigger = "usr";
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 2f96a5c..4be8ba1 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -19,19 +19,19 @@
compatible = "gpio-leds";
boot {
label = "omap3:green:boot";
- gpios = <&gpio1 26 0>;
+ gpios = OMAP_GPIO(26, GPIO_ACTIVE_HIGH);
default-state = "on";
};
user0 {
label = "omap3:red:user0";
- gpios = <&gpio1 27 0>;
+ gpios = OMAP_GPIO(27, GPIO_ACTIVE_HIGH);
default-state = "off";
};
user1 {
label = "omap3:red:user1";
- gpios = <&gpio1 28 0>;
+ gpios = OMAP_GPIO(28, GPIO_ACTIVE_HIGH);
default-state = "off";
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index f3a1bf0..5a2c7a6 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -37,7 +37,7 @@
user2 {
label = "omap3:red:user1";
- gpios = <&gpio1 16 1>;
+ gpios = OMAP_GPIO(16, GPIO_ACTIVE_LOW);
default-state = "off";
};
};
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
index 5df894f..8390c8b 100644
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ b/arch/arm/boot/dts/omap3-tobi.dts
@@ -20,7 +20,7 @@
compatible = "gpio-leds";
heartbeat {
label = "overo:red:gpio21";
- gpios = <&gpio1 21 0>;
+ gpios = OMAP_GPIO(21, GPIO_ACTIVE_HIGH);
linux,default-trigger = "heartbeat";
};
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7c7d494..15049b8 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -8,6 +8,8 @@
* kind, whether express or implied.
*/
+#include <dt-bindings/gpio/omap-gpio.h>
+
#include "skeleton.dtsi"
/ {
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 63148d1..b71f5cd 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -20,13 +20,13 @@
compatible = "gpio-leds";
heartbeat {
label = "pandaboard::status1";
- gpios = <&gpio1 7 0>;
+ gpios = OMAP_GPIO(7, GPIO_ACTIVE_HIGH);
linux,default-trigger = "heartbeat";
};
mmc {
label = "pandaboard::status2";
- gpios = <&gpio1 8 0>;
+ gpios = OMAP_GPIO(8, GPIO_ACTIVE_HIGH);
linux,default-trigger = "mmc0";
};
};
@@ -156,7 +156,7 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+ ti,audpwron-gpio = OMAP_GPIO(127, GPIO_ACTIVE_HIGH);
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5edd08e..f55bb68 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -24,7 +24,7 @@
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 16 0>; /* gpio line 48 */
+ gpio = OMAP_GPIO(48, GPIO_ACTIVE_HIGH);
enable-active-high;
regulator-boot-on;
};
@@ -41,42 +41,42 @@
compatible = "gpio-leds";
debug0 {
label = "omap4:green:debug0";
- gpios = <&gpio2 29 0>; /* 61 */
+ gpios = OMAP_GPIO(61, GPIO_ACTIVE_HIGH);
};
debug1 {
label = "omap4:green:debug1";
- gpios = <&gpio1 30 0>; /* 30 */
+ gpios = OMAP_GPIO(30, GPIO_ACTIVE_HIGH);
};
debug2 {
label = "omap4:green:debug2";
- gpios = <&gpio1 7 0>; /* 7 */
+ gpios = OMAP_GPIO(7, GPIO_ACTIVE_HIGH);
};
debug3 {
label = "omap4:green:debug3";
- gpios = <&gpio1 8 0>; /* 8 */
+ gpios = OMAP_GPIO(8, GPIO_ACTIVE_HIGH);
};
debug4 {
label = "omap4:green:debug4";
- gpios = <&gpio2 18 0>; /* 50 */
+ gpios = OMAP_GPIO(50, GPIO_ACTIVE_HIGH);
};
user1 {
label = "omap4:blue:user";
- gpios = <&gpio6 9 0>; /* 169 */
+ gpios = OMAP_GPIO(169, GPIO_ACTIVE_HIGH);
};
user2 {
label = "omap4:red:user";
- gpios = <&gpio6 10 0>; /* 170 */
+ gpios = OMAP_GPIO(170, GPIO_ACTIVE_HIGH);
};
user3 {
label = "omap4:green:user";
- gpios = <&gpio5 11 0>; /* 139 */
+ gpios = OMAP_GPIO(139, GPIO_ACTIVE_HIGH);
};
};
@@ -296,7 +296,7 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
interrupt-parent = <&gic>;
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+ ti,audpwron-gpio = OMAP_GPIO(127, GPIO_ACTIVE_HIGH);
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 53d80aa..3c00b72 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -14,6 +14,8 @@
*/
/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/omap-gpio.h>
+
#include "skeleton.dtsi"
/ {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e8e6653..af849e6 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -15,6 +15,8 @@
*/
/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/omap-gpio.h>
+
#include "skeleton.dtsi"
/ {
--
1.7.5.4
next prev parent reply other threads:[~2013-05-22 14:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-22 14:27 [PATCH 0/5] ARM: dts: OMAP2+: use preprocessor for device trees Florian Vaussard
2013-05-22 14:27 ` [PATCH 1/5] ARM: dts: OMAP2+: use #include for all " Florian Vaussard
2013-05-22 15:40 ` Tony Lindgren
2013-05-22 16:05 ` Florian Vaussard
2013-05-22 14:27 ` [PATCH 2/5] ARM: dts: OMAP2+: create a DT header for GPIO Florian Vaussard
2013-05-22 15:26 ` Stephen Warren
2013-05-22 15:34 ` Tony Lindgren
2013-05-22 16:00 ` Florian Vaussard
2013-05-22 16:03 ` Stephen Warren
2013-05-22 14:27 ` Florian Vaussard [this message]
2013-05-22 15:28 ` [PATCH 3/5] ARM: dts: OMAP2+: convert DT files to use the new OMAP_GPIO macro Stephen Warren
2013-05-22 16:02 ` Florian Vaussard
2013-05-22 14:27 ` [PATCH 4/5] ARM: dts: OMAP3: fix incorrect notation for musb-hdrc interrupt Florian Vaussard
2013-05-22 15:35 ` Tony Lindgren
2013-05-22 14:27 ` [PATCH 5/5] ARM: dts: OMAP4/5: use existing constants for IRQs Florian Vaussard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369232864-14460-4-git-send-email-florian.vaussard@epfl.ch \
--to=florian.vaussard@epfl.ch \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).