From: Florian Vaussard <florian.vaussard@epfl.ch>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
Stephen Warren <swarren@wwwdotorg.org>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Florian Vaussard <florian.vaussard@epfl.ch>
Subject: [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees
Date: Thu, 23 May 2013 17:36:56 +0200 [thread overview]
Message-ID: <1369323421-4180-1-git-send-email-florian.vaussard@epfl.ch> (raw)
Hello,
Following a similar proposal by Stephen Warren for tegra [1], this series
makes use of the C preprocessor when compiling OMAP DT files, and
accomplishes some improvements to improve overall readability.
Patch 1 is a preparation for the rest of the series.
Patch 2 uses existing constants for GPIOs. Patch 3 does the same for
IRQs. Patch 4 creates a new header for OMAP's padmux, and patch 5 uses
it to simplify pinctrl DT.
For all targets, the .dtb files were diff-tested before and after
applying the series to guarantee identity.
Best regards,
Florian
>From v1:
- Remove duplicated fix
- Remove OMAP_GPIO macro
- Add pinctrl constants
Florian Vaussard (5):
ARM: dts: OMAP2+: use #include for all device trees
ARM: dts: OMAP2+: use existing constants for GPIOs
ARM: dts: OMAP4/5: use existing constants for IRQs
ARM: dts: OMAP2+: header file for pinctrl constants
ARM: dts: OMAP2+: use pinctrl constants
arch/arm/boot/dts/omap2.dtsi | 5 +-
arch/arm/boot/dts/omap2420-h4.dts | 2 +-
arch/arm/boot/dts/omap2420.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 8 +-
arch/arm/boot/dts/omap3-beagle.dts | 34 ++++----
arch/arm/boot/dts/omap3-devkit8000.dts | 10 +-
arch/arm/boot/dts/omap3-evm.dts | 6 +-
arch/arm/boot/dts/omap3-igep.dtsi | 36 ++++----
arch/arm/boot/dts/omap3-igep0020.dts | 10 +-
arch/arm/boot/dts/omap3-igep0030.dts | 10 +-
arch/arm/boot/dts/omap3-overo.dtsi | 4 +-
arch/arm/boot/dts/omap3-tobi.dts | 4 +-
arch/arm/boot/dts/omap3.dtsi | 5 +-
arch/arm/boot/dts/omap3430-sdp.dts | 4 +-
arch/arm/boot/dts/omap34xx.dtsi | 2 +-
arch/arm/boot/dts/omap36xx.dtsi | 2 +-
arch/arm/boot/dts/omap4-panda-a4.dts | 10 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 66 ++++++++--------
arch/arm/boot/dts/omap4-panda-es.dts | 10 +-
arch/arm/boot/dts/omap4-panda.dts | 4 +-
arch/arm/boot/dts/omap4-sdp-es23plus.dts | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 122 ++++++++++++++--------------
arch/arm/boot/dts/omap4-var-som.dts | 8 +-
arch/arm/boot/dts/omap4.dtsi | 118 ++++++++++++++-------------
arch/arm/boot/dts/omap443x.dtsi | 2 +-
arch/arm/boot/dts/omap4460.dtsi | 6 +-
arch/arm/boot/dts/omap5-evm.dts | 92 +++++++++++-----------
arch/arm/boot/dts/omap5.dtsi | 126 +++++++++++++++--------------
include/dt-bindings/pinctrl/omap.h | 54 ++++++++++++
30 files changed, 420 insertions(+), 352 deletions(-)
create mode 100644 include/dt-bindings/pinctrl/omap.h
--
1.7.5.4
next reply other threads:[~2013-05-23 15:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-23 15:36 Florian Vaussard [this message]
2013-05-23 15:36 ` [PATCH v2 1/5] ARM: dts: OMAP2+: use #include for all device trees Florian Vaussard
2013-05-23 15:36 ` [PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs Florian Vaussard
2013-05-23 18:47 ` Tony Lindgren
2013-05-23 15:36 ` [PATCH v2 3/5] ARM: dts: OMAP4/5: use existing constants for IRQs Florian Vaussard
2013-05-23 15:37 ` [PATCH v2 4/5] ARM: dts: OMAP2+: header file for pinctrl constants Florian Vaussard
2013-05-23 15:37 ` [PATCH v2 5/5] ARM: dts: OMAP2+: use " Florian Vaussard
2013-05-23 18:46 ` Tony Lindgren
2013-05-27 11:11 ` Florian Vaussard
2013-05-23 16:00 ` [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees Santosh Shilimkar
2013-05-27 11:14 ` Florian Vaussard
2013-05-28 15:07 ` Stephen Warren
2013-05-28 15:13 ` Florian Vaussard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369323421-4180-1-git-send-email-florian.vaussard@epfl.ch \
--to=florian.vaussard@epfl.ch \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).