From: Florian Vaussard <florian.vaussard@epfl.ch>
To: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
Stephen Warren <swarren@wwwdotorg.org>,
linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
Florian Vaussard <florian.vaussard@epfl.ch>
Subject: [PATCH v2 4/5] ARM: dts: OMAP2+: header file for pinctrl constants
Date: Thu, 23 May 2013 17:37:00 +0200 [thread overview]
Message-ID: <1369323421-4180-5-git-send-email-florian.vaussard@epfl.ch> (raw)
In-Reply-To: <1369323421-4180-1-git-send-email-florian.vaussard@epfl.ch>
Most of the constants are taken from arch/arm/mach-omap2/mux.h.
Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch>
---
include/dt-bindings/pinctrl/omap.h | 54 ++++++++++++++++++++++++++++++++++++
1 files changed, 54 insertions(+), 0 deletions(-)
create mode 100644 include/dt-bindings/pinctrl/omap.h
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
new file mode 100644
index 0000000..253ce95
--- /dev/null
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -0,0 +1,54 @@
+/*
+ * This header provides constants for OMAP pinctrl bindings.
+ *
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009-2010 Texas Instruments
+ */
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP_MUX_MODE0 0
+#define OMAP_MUX_MODE1 1
+#define OMAP_MUX_MODE2 2
+#define OMAP_MUX_MODE3 3
+#define OMAP_MUX_MODE4 4
+#define OMAP_MUX_MODE5 5
+#define OMAP_MUX_MODE6 6
+#define OMAP_MUX_MODE7 7
+
+/* 24xx/34xx mux bit defines */
+#define OMAP_PULL_ENA (1 << 3)
+#define OMAP_PULL_UP (1 << 4)
+#define OMAP_ALTELECTRICALSEL (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP_INPUT_EN (1 << 8)
+#define OMAP_OFF_EN (1 << 9)
+#define OMAP_OFFOUT_EN (1 << 10)
+#define OMAP_OFFOUT_VAL (1 << 11)
+#define OMAP_OFF_PULL_EN (1 << 12)
+#define OMAP_OFF_PULL_UP (1 << 13)
+#define OMAP_WAKEUP_EN (1 << 14)
+
+/* 44xx specific mux bit defines */
+#define OMAP_WAKEUP_EVENT (1 << 15)
+
+/* Active pin states */
+#define OMAP_PIN_OUTPUT 0
+#define OMAP_PIN_OUTPUT_PULLUP (OMAP_PIN_OUTPUT | OMAP_PULL_ENA \
+ | OMAP_PULL_UP)
+#define OMAP_PIN_OUTPUT_PULLDOWN (OMAP_PIN_OUTPUT | OMAP_PULL_ENA)
+#define OMAP_PIN_INPUT OMAP_INPUT_EN
+#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \
+ | OMAP_PULL_UP)
+#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN)
+
+/* Off mode states */
+#define OMAP_PIN_OFF_NONE 0
+#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \
+ | OMAP_OFFOUT_VAL)
+#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN)
+#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \
+ | OMAP_OFF_PULL_UP)
+#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
+#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
+
--
1.7.5.4
next prev parent reply other threads:[~2013-05-23 15:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-23 15:36 [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees Florian Vaussard
2013-05-23 15:36 ` [PATCH v2 1/5] ARM: dts: OMAP2+: use #include for all " Florian Vaussard
2013-05-23 15:36 ` [PATCH v2 2/5] ARM: dts: OMAP2+: use existing constants for GPIOs Florian Vaussard
2013-05-23 18:47 ` Tony Lindgren
2013-05-23 15:36 ` [PATCH v2 3/5] ARM: dts: OMAP4/5: use existing constants for IRQs Florian Vaussard
2013-05-23 15:37 ` Florian Vaussard [this message]
2013-05-23 15:37 ` [PATCH v2 5/5] ARM: dts: OMAP2+: use pinctrl constants Florian Vaussard
2013-05-23 18:46 ` Tony Lindgren
2013-05-27 11:11 ` Florian Vaussard
2013-05-23 16:00 ` [PATCH v2 0/5] ARM: dts: OMAP2+: use preprocessor for device trees Santosh Shilimkar
2013-05-27 11:14 ` Florian Vaussard
2013-05-28 15:07 ` Stephen Warren
2013-05-28 15:13 ` Florian Vaussard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369323421-4180-5-git-send-email-florian.vaussard@epfl.ch \
--to=florian.vaussard@epfl.ch \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).