From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Vaussard Subject: [PATCH v3 4/5] ARM: dts: OMAP2+: header file for pinctrl constants Date: Mon, 27 May 2013 16:52:33 +0200 Message-ID: <1369666354-29152-5-git-send-email-florian.vaussard@epfl.ch> References: <1369666354-29152-1-git-send-email-florian.vaussard@epfl.ch> Return-path: In-Reply-To: <1369666354-29152-1-git-send-email-florian.vaussard@epfl.ch> Sender: linux-omap-owner@vger.kernel.org To: Benoit Cousson Cc: Tony Lindgren , Stephen Warren , Santosh Shilimkar , linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org, Florian Vaussard List-Id: devicetree@vger.kernel.org Most of the constants are taken from arch/arm/mach-omap2/mux.h. Signed-off-by: Florian Vaussard Acked-by: Santosh Shilimkar --- include/dt-bindings/pinctrl/omap.h | 50 ++++++++++++++++++++++++++++++++++++ 1 files changed, 50 insertions(+), 0 deletions(-) create mode 100644 include/dt-bindings/pinctrl/omap.h diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h new file mode 100644 index 0000000..370df3f --- /dev/null +++ b/include/dt-bindings/pinctrl/omap.h @@ -0,0 +1,50 @@ +/* + * This header provides constants for OMAP pinctrl bindings. + * + * Copyright (C) 2009 Nokia + * Copyright (C) 2009-2010 Texas Instruments + */ + +/* 34xx mux mode options for each pin. See TRM for options */ +#define MUX_MODE0 0 +#define MUX_MODE1 1 +#define MUX_MODE2 2 +#define MUX_MODE3 3 +#define MUX_MODE4 4 +#define MUX_MODE5 5 +#define MUX_MODE6 6 +#define MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define PULL_ENA (1 << 3) +#define PULL_UP (1 << 4) +#define ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define INPUT_EN (1 << 8) +#define OFF_EN (1 << 9) +#define OFFOUT_EN (1 << 10) +#define OFFOUT_VAL (1 << 11) +#define OFF_PULL_EN (1 << 12) +#define OFF_PULL_UP (1 << 13) +#define WAKEUP_EN (1 << 14) + +/* 44xx specific mux bit defines */ +#define WAKEUP_EVENT (1 << 15) + +/* Active pin states */ +#define PIN_OUTPUT 0 +#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) +#define PIN_INPUT INPUT_EN +#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) + +/* Off mode states */ +#define PIN_OFF_NONE 0 +#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) +#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) +#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) +#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) +#define PIN_OFF_WAKEUPENABLE WAKEUP_EN + -- 1.7.5.4