From: Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: shc_work-JGs/UdohzUI@public.gmane.org,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
Alison_Chaiken-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org,
Huang Shijie <b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v4 0/6] ARM: imx6q{dl}: add the WEIM driver
Date: Tue, 28 May 2013 14:20:06 +0800 [thread overview]
Message-ID: <1369722012-6915-1-git-send-email-b32955@freescale.com> (raw)
This patch set adds a new driver for WEIM in the imx6q{dl}-sabreauto boards.
The WEIM(Wireless External Interface Module) works like a bus.
You can attach many different devices on it, such as NOR, onenand.
In the case of i.MX6q-sabreauto, only the NOR is connected to WEIM.
v3 --> v4:
[0] use a more proper pad value for the data pins.
[1] remove the weim_remove() hook.
[2] remove the blank line.
[3] use the lower case for the hex value.
[4] add returne value for weim_parse_dt().
[5] rename the pinctrls.
v2 --> v3:
[0] split the NOR pinctrl.
[1] make the driver unloaded. change to bool type in Kconfig.
[2] use the of_platform_populate().
[3] remove the unused "interrupt" property from the Doc.
v1 --> v2:
[0] remove used PADs.
[1] fix the wrong pad values, (thanks Alison Chaiken)
[2] remove the weim-cs-index.
[3] add "fsl" for the weim-cs-timing.
[4] remove the partitions info in the document.
[5] rewrite the drivers(follow Sascha and Shawn's comments)
Huang Shijie (6):
drivers: bus: add a new driver for WEIM
ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM
ARM: dts: imx6qdl: add more information for WEIM
ARM: dts: imx6q: add pinctrls for WEIM NOR
ARM: dts: imx6dl: add pinctrls for WEIM NOR
ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR
Documentation/devicetree/bindings/bus/imx-weim.txt | 49 +++++++
arch/arm/boot/dts/imx6dl-sabreauto.dts | 9 +-
arch/arm/boot/dts/imx6dl.dtsi | 58 ++++++++
arch/arm/boot/dts/imx6q-sabreauto.dts | 9 +-
arch/arm/boot/dts/imx6q.dtsi | 59 +++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 21 +++-
arch/arm/boot/dts/imx6qdl.dtsi | 4 +-
drivers/bus/Kconfig | 9 ++
drivers/bus/Makefile | 1 +
drivers/bus/imx-weim.c | 138 ++++++++++++++++++++
10 files changed, 353 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/bus/imx-weim.txt
create mode 100644 drivers/bus/imx-weim.c
next reply other threads:[~2013-05-28 6:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-28 6:20 Huang Shijie [this message]
[not found] ` <1369722012-6915-1-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-05-28 6:20 ` [PATCH v4 1/6] drivers: bus: add a new driver for WEIM Huang Shijie
[not found] ` <1369722012-6915-2-git-send-email-b32955-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-05-28 6:43 ` Sascha Hauer
2013-05-28 6:50 ` Shawn Guo
2013-06-06 15:09 ` Shawn Guo
[not found] ` <20130606150935.GD28270-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2013-06-06 15:26 ` Arnd Bergmann
2013-06-06 18:57 ` Arnd Bergmann
2013-05-28 6:20 ` [PATCH v4 2/6] ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM Huang Shijie
2013-05-28 6:20 ` [PATCH v4 3/6] ARM: dts: imx6qdl: add more information for WEIM Huang Shijie
2013-05-28 6:20 ` [PATCH v4 4/6] ARM: dts: imx6q: add pinctrls for WEIM NOR Huang Shijie
2013-05-28 6:20 ` [PATCH v4 5/6] ARM: dts: imx6dl: " Huang Shijie
2013-05-28 6:20 ` [PATCH v4 6/6] ARM: dts: imx6qdl-sabreauto: enable the " Huang Shijie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369722012-6915-1-git-send-email-b32955@freescale.com \
--to=b32955-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=Alison_Chaiken-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=shc_work-JGs/UdohzUI@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).