devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Grzeschik <mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	balbi-l0cyMroinI0@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	Michael Grzeschik
	<m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 1/7] USB: add devicetree helpers for determining dr_mode and phy_type
Date: Fri, 31 May 2013 20:38:43 +0200	[thread overview]
Message-ID: <1370025529-7414-2-git-send-email-mgr@pengutronix.de> (raw)
In-Reply-To: <1370025529-7414-1-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

From: Michael Grzeschik <m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

This adds two little devicetree helper functions for determining the
dr_mode (host, peripheral, otg) and phy_type (utmi, ulpi,...) from
the devicetree.

Signed-off-by: Michael Grzeschik <m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Marc Kleine-Budde <mkl-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Sascha Hauer <s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 drivers/usb/phy/Makefile |  1 +
 drivers/usb/phy/of.c     | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/usb-common.c | 35 +++++++++++++++++++++++++++++++++++
 include/linux/usb/of.h   | 28 ++++++++++++++++++++++++++++
 include/linux/usb/otg.h  |  7 +++++++
 include/linux/usb/phy.h  |  9 +++++++++
 6 files changed, 127 insertions(+)
 create mode 100644 drivers/usb/phy/of.c
 create mode 100644 include/linux/usb/of.h

diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index a9169cb..070eca3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -5,6 +5,7 @@
 ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_PHY)			+= phy.o
+obj-$(CONFIG_OF)			+= of.o
 
 # transceiver drivers, keep the list sorted
 
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
new file mode 100644
index 0000000..e6f3b74
--- /dev/null
+++ b/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *usbphy_modes[] = {
+	[USBPHY_INTERFACE_MODE_UNKNOWN]	= "",
+	[USBPHY_INTERFACE_MODE_UTMI]	= "utmi",
+	[USBPHY_INTERFACE_MODE_UTMIW]	= "utmi_wide",
+	[USBPHY_INTERFACE_MODE_ULPI]	= "ulpi",
+	[USBPHY_INTERFACE_MODE_SERIAL]	= "serial",
+	[USBPHY_INTERFACE_MODE_HSIC]	= "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the correspondig enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	const char *phy_type;
+	int err, i;
+
+	err = of_property_read_string(np, "phy_type", &phy_type);
+	if (err < 0)
+		return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+		if (!strcmp(phy_type, usbphy_modes[i]))
+			return i;
+
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index 0db0a91..027582d 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -13,7 +13,9 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/usb/ch9.h>
+#include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
 const char *usb_otg_state_string(enum usb_otg_state state)
@@ -79,4 +81,37 @@ const char *usb_state_string(enum usb_device_state state)
 }
 EXPORT_SYMBOL_GPL(usb_state_string);
 
+#ifdef CONFIG_OF
+static const char *usb_dr_modes[] = {
+	[USB_DR_MODE_UNKNOWN]		= "",
+	[USB_DR_MODE_HOST]		= "host",
+	[USB_DR_MODE_PERIPHERAL]	= "peripheral",
+	[USB_DR_MODE_OTG]		= "otg",
+};
+
+/**
+ * of_usb_get_dr_mode - Get dual role mode for given device_node
+ * @np:	Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'dr_mode',
+ * and returns the correspondig enum usb_dr_mode
+ */
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	const char *dr_mode;
+	int err, i;
+
+	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(dr_mode, usb_dr_modes[i]))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
+#endif
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
new file mode 100644
index 0000000..e460a24
--- /dev/null
+++ b/include/linux/usb/of.h
@@ -0,0 +1,28 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+
+#ifdef CONFIG_OF
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+	return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 291e01b..154332b 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -92,4 +92,11 @@ otg_start_srp(struct usb_otg *otg)
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
 
+enum usb_dr_mode {
+	USB_DR_MODE_UNKNOWN,
+	USB_DR_MODE_HOST,
+	USB_DR_MODE_PERIPHERAL,
+	USB_DR_MODE_OTG,
+};
+
 #endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h
index 6b5978f..4403680 100644
--- a/include/linux/usb/phy.h
+++ b/include/linux/usb/phy.h
@@ -12,6 +12,15 @@
 #include <linux/notifier.h>
 #include <linux/usb.h>
 
+enum usb_phy_interface {
+	USBPHY_INTERFACE_MODE_UNKNOWN,
+	USBPHY_INTERFACE_MODE_UTMI,
+	USBPHY_INTERFACE_MODE_UTMIW,
+	USBPHY_INTERFACE_MODE_ULPI,
+	USBPHY_INTERFACE_MODE_SERIAL,
+	USBPHY_INTERFACE_MODE_HSIC,
+};
+
 enum usb_phy_events {
 	USB_EVENT_NONE,         /* no events or cable disconnected */
 	USB_EVENT_VBUS,         /* vbus valid event */
-- 
1.8.2.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2013-05-31 18:38 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-31 18:38 [PATCH v6 0/7] USB: add devicetree helpers for determining dr_mode and phy_type Michael Grzeschik
     [not found] ` <1370025529-7414-1-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-05-31 18:38   ` Michael Grzeschik [this message]
     [not found]     ` <1370025529-7414-2-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-03 12:32       ` [PATCH 1/7] " Alexander Shishkin
     [not found]         ` <8761xvjrwt.fsf-qxRn5AmX6ZD9BXuAQUXR0fooFf0ArEBIu+b9c/7xato@public.gmane.org>
2013-06-04 13:01           ` Michael Grzeschik
     [not found]             ` <20130604130140.GF28181-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-04 20:25               ` Felipe Balbi
2013-05-31 18:38   ` [PATCH 2/7] USB: chipidea: ci13xxx-imx: move static pdata into probe function Michael Grzeschik
     [not found]     ` <1370025529-7414-3-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-05 12:29       ` Michael Grzeschik
     [not found]         ` <20130605122906.GB20095-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-05 13:04           ` Alexander Shishkin
2013-05-31 18:38   ` [PATCH 3/7] USB: chipidea: add PTW, PTS and STS handling Michael Grzeschik
     [not found]     ` <1370025529-7414-4-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-03 12:35       ` Alexander Shishkin
     [not found]         ` <8738szjrs6.fsf-qxRn5AmX6ZD9BXuAQUXR0fooFf0ArEBIu+b9c/7xato@public.gmane.org>
2013-06-03 16:11           ` Michael Grzeschik
     [not found]             ` <20130603161136.GB28181-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-04  9:22               ` Alexander Shishkin
2013-06-06 10:54       ` Michael Grzeschik
2013-05-31 18:38   ` [PATCH 4/7] USB chipidea: introduce dual role mode pdata flags Michael Grzeschik
     [not found]     ` <1370025529-7414-5-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-03 12:37       ` Alexander Shishkin
     [not found]         ` <87zjv7id52.fsf-qxRn5AmX6ZD9BXuAQUXR0fooFf0ArEBIu+b9c/7xato@public.gmane.org>
2013-06-04  1:42           ` Peter Chen
     [not found]             ` <CAL411-pMnJC55M3n5bAuffH3pwRZTzhBfDiEfT+egtGN29c7uw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-06-04  9:31               ` Alexander Shishkin
     [not found]                 ` <87ehcii5n0.fsf-qxRn5AmX6ZD9BXuAQUXR0fooFf0ArEBIu+b9c/7xato@public.gmane.org>
2013-06-04 10:09                   ` Peter Chen
     [not found]                     ` <CAL411-pyrFXxyEX_GAFRS5ubh_Pf2yWLZXYC3PJevu1WSJS78g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-06-04 11:09                       ` Alexander Shishkin
2013-05-31 18:38   ` [PATCH 5/7] USB chipidea i.MX: use devm_usb_get_phy_by_phandle to get phy Michael Grzeschik
     [not found]     ` <1370025529-7414-6-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-05-31 19:23       ` Sergei Shtylyov
2013-06-03 12:39       ` Alexander Shishkin
2013-05-31 18:38   ` [PATCH 6/7] usb: chipidea: udc: add force-full-speed option Michael Grzeschik
     [not found]     ` <1370025529-7414-7-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-01  7:39       ` Sascha Hauer
     [not found]         ` <20130601073933.GK32299-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-01  8:19           ` Michael Grzeschik
     [not found]             ` <20130601081932.GA28181-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-01  9:21               ` Sascha Hauer
     [not found]                 ` <20130601092151.GP32299-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-03 12:40                   ` Alexander Shishkin
2013-05-31 18:38   ` [PATCH 7/7] usb: chipidea: usbmisc: use module_platform_driver Michael Grzeschik
     [not found]     ` <1370025529-7414-8-git-send-email-mgr-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-03 12:41       ` Alexander Shishkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370025529-7414-2-git-send-email-mgr@pengutronix.de \
    --to=mgr-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=balbi-l0cyMroinI0@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).