From: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Steffen Trumtrar
<s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 2/4] ARM i.MX53: tqma53: fix pinctrl settings
Date: Tue, 4 Jun 2013 11:12:28 +0200 [thread overview]
Message-ID: <1370337150-18487-3-git-send-email-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <1370337150-18487-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
From: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
BIT(31) is NO_PAD_CTL, not BIT(16)
Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/boot/dts/imx53-tqma53.dtsi | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 3b2eb7d..45a273b 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -72,11 +72,11 @@
i2s {
pinctrl_i2s_1: i2s-grp1 {
fsl,pins = <
- MX53_PAD_GPIO_19__GPIO4_5 0x10000 /* I2S_MCLK */
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x10000 /* I2S_SCLK */
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x10000 /* I2S_DOUT */
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x10000 /* I2S_LRCLK */
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x10000 /* I2S_DIN */
+ MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* I2S_MCLK */
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */
>;
};
};
@@ -84,16 +84,16 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x10000 /* VSYNC */
- MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x10000 /* HSYNC */
- MX53_PAD_PATA_DA_1__GPIO7_7 0x10000 /* LCD_BLT_EN */
- MX53_PAD_PATA_DA_2__GPIO7_8 0x10000 /* LCD_RESET */
- MX53_PAD_PATA_DATA5__GPIO2_5 0x10000 /* LCD_POWER */
- MX53_PAD_PATA_DATA6__GPIO2_6 0x10000 /* PMIC_INT */
- MX53_PAD_PATA_DATA14__GPIO2_14 0x10000 /* CSI_RST */
- MX53_PAD_PATA_DATA15__GPIO2_15 0x10000 /* CSI_PWDN */
- MX53_PAD_GPIO_0__GPIO1_0 0x10000 /* SYSTEM_DOWN */
- MX53_PAD_GPIO_3__GPIO1_3 0x10000
+ MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0x80000000 /* VSYNC */
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0x80000000 /* HSYNC */
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */
+ MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */
+ MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */
+ MX53_PAD_GPIO_0__GPIO1_0 0x80000000 /* SYSTEM_DOWN */
+ MX53_PAD_GPIO_3__GPIO1_3 0x80000000
>;
};
};
--
1.8.2.rc2
next prev parent reply other threads:[~2013-06-04 9:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-04 9:12 [PATCH 0/4] updates for tqma53.dtsi Steffen Trumtrar
[not found] ` <1370337150-18487-1-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-04 9:12 ` [PATCH 1/4] ARM i.MX53: tqma53: Fix interrupt polarity for the mc34708 Steffen Trumtrar
[not found] ` <1370337150-18487-2-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-06 8:43 ` Shawn Guo
2013-06-04 9:12 ` Steffen Trumtrar [this message]
2013-06-04 9:12 ` [PATCH 3/4] ARM i.MX53: tqma53: rev 300 specific pin configuration Steffen Trumtrar
2013-06-04 9:12 ` [PATCH 4/4] ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2 Steffen Trumtrar
[not found] ` <1370337150-18487-5-git-send-email-s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-06-06 8:55 ` Shawn Guo
[not found] ` <20130606085549.GB11305-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2013-06-06 9:02 ` Steffen Trumtrar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370337150-18487-3-git-send-email-s.trumtrar@pengutronix.de \
--to=s.trumtrar-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).