* [PATCH 0/2] ARM: dts: Add palmas dtsi
@ 2013-06-10 6:22 J Keerthy
2013-06-10 6:22 ` [PATCH 1/2] ARM: dts: add dtsi for palmas J Keerthy
2013-06-10 6:22 ` [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties J Keerthy
0 siblings, 2 replies; 5+ messages in thread
From: J Keerthy @ 2013-06-10 6:22 UTC (permalink / raw)
To: b-cousson, devicetree-discuss
Cc: linux-omap, linux-kernel, ldewangan, grant.likely, swarren,
swarren, sameo, gg, lee.jones, J Keerthy
This patch series adds palmas.dtsi and adds the omap5
specific palmas entries in the omap5-uevm board file.
This patch series is based on:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.11/dts
Boot tested on omap5-uevm board.
J Keerthy (2):
ARM: dts: add dtsi for palmas
ARM: dts: OMAP5: add palmas node and omap specific palmas regulator
properties
arch/arm/boot/dts/omap5-uevm.dts | 145 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/palmas.dtsi | 98 +++++++++++++++++++++++++
2 files changed, 243 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/palmas.dtsi
--
1.7.5.4
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH 1/2] ARM: dts: add dtsi for palmas 2013-06-10 6:22 [PATCH 0/2] ARM: dts: Add palmas dtsi J Keerthy @ 2013-06-10 6:22 ` J Keerthy 2013-06-10 6:22 ` [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties J Keerthy 1 sibling, 0 replies; 5+ messages in thread From: J Keerthy @ 2013-06-10 6:22 UTC (permalink / raw) To: b-cousson, devicetree-discuss Cc: linux-omap, linux-kernel, ldewangan, grant.likely, swarren, swarren, sameo, gg, lee.jones, J Keerthy Adds palmas mfd and palmas regulator nodes. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: J Keerthy <j-keerthy@ti.com> --- arch/arm/boot/dts/palmas.dtsi | 98 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 98 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/palmas.dtsi diff --git a/arch/arm/boot/dts/palmas.dtsi b/arch/arm/boot/dts/palmas.dtsi new file mode 100644 index 0000000..4c5162f --- /dev/null +++ b/arch/arm/boot/dts/palmas.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +&palmas { + compatible = "ti,palmas"; + interrupt-controller; + #interrupt-cells = <2>; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + regulator-name = "smps123"; + }; + + smps45_reg: smps45 { + regulator-name = "smps45"; + }; + + smps6_reg: smps6 { + regulator-name = "smps6"; + }; + + smps7_reg: smps7 { + regulator-name = "smps7"; + }; + + smps8_reg: smps8 { + regulator-name = "smps8"; + }; + + smps9_reg: smps9 { + regulator-name = "smps9"; + }; + + smps10_reg: smps10 { + regulator-name = "smps10"; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1"; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2"; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3"; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4"; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5"; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6"; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7"; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8"; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9"; + }; + + ldoln_reg: ldoln { + regulator-name = "ldoln"; + }; + + ldousb_reg: ldousb { + regulator-name = "ldousb"; + }; + }; + }; +}; -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties 2013-06-10 6:22 [PATCH 0/2] ARM: dts: Add palmas dtsi J Keerthy 2013-06-10 6:22 ` [PATCH 1/2] ARM: dts: add dtsi for palmas J Keerthy @ 2013-06-10 6:22 ` J Keerthy 2013-06-10 8:12 ` Lee Jones 1 sibling, 1 reply; 5+ messages in thread From: J Keerthy @ 2013-06-10 6:22 UTC (permalink / raw) To: b-cousson, devicetree-discuss Cc: linux-omap, linux-kernel, ldewangan, grant.likely, swarren, swarren, sameo, gg, lee.jones, J Keerthy Add palmas node and omap specific palmas regulator properties. This patch is based on: git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.11/dts Boot tested on omap5-uevm board. Signed-off-by: J Keerthy <j-keerthy@ti.com> --- arch/arm/boot/dts/omap5-uevm.dts | 145 ++++++++++++++++++++++++++++++++++++++ 1 files changed, 145 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 927db1e..88172db 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -254,6 +254,151 @@ pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; + + palmas: palmas@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + +}; + +#include "palmas.dtsi" + +&palmas { + palmas_pmic { + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + regulator-always-on; + regulator-boot-on; + ti,smps-range = <0x80>; + }; + + smps10_reg: smps10 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: ldo8 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; &i2c5 { -- 1.7.5.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties 2013-06-10 6:22 ` [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties J Keerthy @ 2013-06-10 8:12 ` Lee Jones 2013-06-10 8:19 ` J, KEERTHY 0 siblings, 1 reply; 5+ messages in thread From: Lee Jones @ 2013-06-10 8:12 UTC (permalink / raw) To: J Keerthy Cc: b-cousson, devicetree-discuss, linux-omap, linux-kernel, ldewangan, grant.likely, swarren, swarren, sameo, gg > Add palmas node and omap specific palmas regulator properties. > > This patch is based on: > > git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git > for_3.11/dts There's no need for this to be in the commit message. > Boot tested on omap5-uevm board. > > Signed-off-by: J Keerthy <j-keerthy@ti.com> > --- > arch/arm/boot/dts/omap5-uevm.dts | 145 ++++++++++++++++++++++++++++++++++++++ > 1 files changed, 145 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts > index 927db1e..88172db 100644 > --- a/arch/arm/boot/dts/omap5-uevm.dts > +++ b/arch/arm/boot/dts/omap5-uevm.dts > @@ -254,6 +254,151 @@ > pinctrl-0 = <&i2c1_pins>; > > clock-frequency = <400000>; > + > + palmas: palmas@48 { > + reg = <0x48>; > + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ The interrupt property is fairly ubiqutous. There's not really any need to document it in this manor. > + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ Use the IRQ includes in dt-bindings. > + interrupt-parent = <&gic>; > + }; > + > +}; > + > +#include "palmas.dtsi" I'm a bit confused by this. Is it now common practice to break out nodes in this way? I assume to counter mass indentation, but it's a bit alien to me. > +&palmas { > + palmas_pmic { > + ti,ldo6-vibrator; > + > + regulators { > + smps123_reg: smps123 { > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; Are these all board specific, or are they shared with any other platform? > + smps45_reg: smps45 { > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1310000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps6_reg: smps6 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps7_reg: smps7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps8_reg: smps8 { > + regulator-min-microvolt = < 600000>; > + regulator-max-microvolt = <1310000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + smps9_reg: smps9 { > + regulator-min-microvolt = <2100000>; > + regulator-max-microvolt = <2100000>; > + regulator-always-on; > + regulator-boot-on; > + ti,smps-range = <0x80>; > + }; > + > + smps10_reg: smps10 { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo1_reg: ldo1 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo2_reg: ldo2 { > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo3_reg: ldo3 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo4_reg: ldo4 { > + regulator-min-microvolt = <2200000>; > + regulator-max-microvolt = <2200000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo5_reg: ldo5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo6_reg: ldo6 { > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo7_reg: ldo7 { > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo8_reg: ldo8 { > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldo9_reg: ldo9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldoln_reg: ldoln { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + ldousb_reg: ldousb { > + regulator-min-microvolt = <3250000>; > + regulator-max-microvolt = <3250000>; > + regulator-always-on; > + regulator-boot-on; > + }; > + }; > + }; > }; > > &i2c5 { -- Lee Jones Linaro ST-Ericsson Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties 2013-06-10 8:12 ` Lee Jones @ 2013-06-10 8:19 ` J, KEERTHY 0 siblings, 0 replies; 5+ messages in thread From: J, KEERTHY @ 2013-06-10 8:19 UTC (permalink / raw) To: Lee Jones Cc: Cousson, Benoit, devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, ldewangan@nvidia.com, grant.likely@secretlab.ca, swarren@wwwdotorg.org, swarren@nvidia.com, sameo@linux.intel.com, gg@slimlogic.co.uk Hello Lee Jones, > -----Original Message----- > From: Lee Jones [mailto:lee.jones@linaro.org] > Sent: Monday, June 10, 2013 1:42 PM > To: J, KEERTHY > Cc: Cousson, Benoit; devicetree-discuss@lists.ozlabs.org; linux- > omap@vger.kernel.org; linux-kernel@vger.kernel.org; > ldewangan@nvidia.com; grant.likely@secretlab.ca; swarren@wwwdotorg.org; > swarren@nvidia.com; sameo@linux.intel.com; gg@slimlogic.co.uk > Subject: Re: [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap > specific palmas regulator properties > > > Add palmas node and omap specific palmas regulator properties. > > > > This patch is based on: > > > > git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux- > omap-dt.git > > for_3.11/dts > > There's no need for this to be in the commit message. > Ok. I will remove this. > > Boot tested on omap5-uevm board. > > > > Signed-off-by: J Keerthy <j-keerthy@ti.com> > > --- > > arch/arm/boot/dts/omap5-uevm.dts | 145 > > ++++++++++++++++++++++++++++++++++++++ > > 1 files changed, 145 insertions(+), 0 deletions(-) > > > > diff --git a/arch/arm/boot/dts/omap5-uevm.dts > > b/arch/arm/boot/dts/omap5-uevm.dts > > index 927db1e..88172db 100644 > > --- a/arch/arm/boot/dts/omap5-uevm.dts > > +++ b/arch/arm/boot/dts/omap5-uevm.dts > > @@ -254,6 +254,151 @@ > > pinctrl-0 = <&i2c1_pins>; > > > > clock-frequency = <400000>; > > + > > + palmas: palmas@48 { > > + reg = <0x48>; > > + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ > > The interrupt property is fairly ubiqutous. There's not really any need > to document it in this manor. > > > + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ > > Use the IRQ includes in dt-bindings. Oops Yes I will include. > > > + interrupt-parent = <&gic>; > > + }; > > + > > +}; > > + > > +#include "palmas.dtsi" > > I'm a bit confused by this. Is it now common practice to break out > nodes in this way? I assume to counter mass indentation, but it's a bit > alien to me. > > > +&palmas { > > + palmas_pmic { > > + ti,ldo6-vibrator; > > + > > + regulators { > > + smps123_reg: smps123 { > > + regulator-min-microvolt = < 600000>; > > + regulator-max-microvolt = <1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > Are these all board specific, or are they shared with any other > platform? Yes. Hence moved all of them to board file as compared to my Last approach when I had kept all of them under palmas.dtsi. > > > + smps45_reg: smps45 { > > + regulator-min-microvolt = < 600000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + smps6_reg: smps6 { > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + smps7_reg: smps7 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + smps8_reg: smps8 { > > + regulator-min-microvolt = < 600000>; > > + regulator-max-microvolt = <1310000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + smps9_reg: smps9 { > > + regulator-min-microvolt = <2100000>; > > + regulator-max-microvolt = <2100000>; > > + regulator-always-on; > > + regulator-boot-on; > > + ti,smps-range = <0x80>; > > + }; > > + > > + smps10_reg: smps10 { > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo1_reg: ldo1 { > > + regulator-min-microvolt = <2800000>; > > + regulator-max-microvolt = <2800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo2_reg: ldo2 { > > + regulator-min-microvolt = <2900000>; > > + regulator-max-microvolt = <2900000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo3_reg: ldo3 { > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo4_reg: ldo4 { > > + regulator-min-microvolt = <2200000>; > > + regulator-max-microvolt = <2200000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo5_reg: ldo5 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo6_reg: ldo6 { > > + regulator-min-microvolt = <1500000>; > > + regulator-max-microvolt = <1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo7_reg: ldo7 { > > + regulator-min-microvolt = <1500000>; > > + regulator-max-microvolt = <1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo8_reg: ldo8 { > > + regulator-min-microvolt = <1500000>; > > + regulator-max-microvolt = <1500000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldo9_reg: ldo9 { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldoln_reg: ldoln { > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + > > + ldousb_reg: ldousb { > > + regulator-min-microvolt = <3250000>; > > + regulator-max-microvolt = <3250000>; > > + regulator-always-on; > > + regulator-boot-on; > > + }; > > + }; > > + }; > > }; > > > > &i2c5 { > > -- > Lee Jones > Linaro ST-Ericsson Landing Team Lead > Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook > | Twitter | Blog ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-06-10 8:19 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-06-10 6:22 [PATCH 0/2] ARM: dts: Add palmas dtsi J Keerthy 2013-06-10 6:22 ` [PATCH 1/2] ARM: dts: add dtsi for palmas J Keerthy 2013-06-10 6:22 ` [PATCH 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties J Keerthy 2013-06-10 8:12 ` Lee Jones 2013-06-10 8:19 ` J, KEERTHY
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).